IATA airport code


An IATA airport code, also known as an IATA location identifier, IATA station code, or simply a location identifier, is a three-letter geocode designating many airports and metropolitan areas around the world, defined by the International Air Transport Association. The characters prominently displayed on baggage tags attached at airport check-in desks are an example of a way these codes are used.
The assignment of these codes is governed by IATA Resolution 763, and it is administered by the IATA's headquarters in Montreal. The codes are published semi-annually in the IATA Airline Coding Directory.
IATA also provides codes for railway stations and for airport handling entities. A list of airports sorted by IATA code is available. A list of railway station codes, shared in agreements between airlines and rail lines such as Amtrak, SNCF French Railways, and Deutsche Bahn, is available. Many railway administrations have their own list of codes for their stations, such as the list of Amtrak station codes.

List

History

Airport codes arose out of the convenience that it brought pilots for location identification in the 1930s. Initially, pilots in the United States used the two-letter code from the National Weather Service for identifying cities. This system became unmanageable for cities and towns without an NWS identifier, and thus, a three-letter system of airport codes was implemented. This system allowed for 17,576 permutations, assuming all letters can be used in conjunction with each other.

Naming conventions

Predominantly, airport codes are named after the first three letters of the city in which it is located—ATL for Atlanta, SIN for Singapore, ASU for Asunción, MEX for Mexico City, DEN for Denver; IST for Istanbul; or a combination of the letters in its name, ALA for Almaty, EWR for Newark, GDL for Guadalajara, JNB for Johannesburg, HKG for Hong Kong, SLC for Salt Lake City and WAW for Warsaw. Some airports in the United States retained their NWS codes and simply appended an X at the end, such as LAX for Los Angeles, PDX for Portland, and PHX for Phoenix.
Sometimes the airport code reflects pronunciation, rather than spelling, such as NAN, which reflects the pronunciation of "Nadi" as in Fijian, where "d" is realized as the prenasalized stop.
For many reasons, some airport codes do not fit the normal scheme described above. Some airports, for example, cross several municipalities or regions, and therefore, use codes derived from some of their letters, resulting in DFW for Dallas/Fort Worth, DTW for Detroit-Wayne County, LBA for Leeds-Bradford, MSP for Minneapolis-Saint Paul, and RDU for Raleigh-DUrham.
Canada's unusual codes–which bear little to no similarity with any conventional abbreviation to the city's name–such as YUL in Montréal, and YEG in Edmonton, originated from the two-letter codes used to identify weather reporting stations in the 1930s. The letters preceding the two-letter code follow the following format:
In large metropolitan areas, airport codes are often named after the airport itself instead of the city it serves, while another code is reserved which refers to the city itself. For instance:
Or using a code for the city in one of the major airports and then assigning another code to another airport:
When different cities with the same name each have an airport, they need to be assigned different codes. These are some examples:
Sometimes, a new airport is built, replacing the old one, leaving the city's new "major" airport code to no longer correspond with the city's name. The original airport in Nashville, Tennessee was built in 1936 as part of the Works Progress Administration and called Berry Field with the designation, BNA. A new facility known as Nashville International Airport was built in 1987 but still uses BNA. This is in conjunction to rules aimed to avoid confusion that seem to apply in the United States, which state that "the first and second letters or second and third letters of an identifier may not be duplicated with less than 200 nautical miles separation." Thus, Washington D.C. area's three airports all have radically different codes: IAD for Washington–Dulles, DCA for Washington–Reagan, and BWI for Baltimore. Since HOU is used for William P. Hobby Airport, the new Houston–Intercontinental became IAH. The code BKK was originally assigned to Bangkok–Don Mueang and was later transferred to Suvarnabhumi Airport, while the former adopted DMK. The code ISK was originally assigned to Gandhinagar Airport and later on transferred to Ozar Airport. Shanghai–Hongqiao retained the code SHA, while the newer Shanghai–Pudong adopted PVG. The opposite is true for Berlin: the airport Berlin–Tegel uses the code TXL, while its smaller counterpart Berlin–Schönefeld uses SXF; the yet-to-open Berlin Brandenburg Airport has the airport code BER, which is also part of its branding. The airports of Hamburg and Hannover are less than apart and therefore share the same first and middle letters, indicating that this rule might be followed only in Germany.

Cities or airports changing names

Many cities retain historical names in their airport codes, even after having undergone an official name/spelling/transliteration change:
Some airport codes are based on previous names associated with a present airport, often with a military heritage. These include:
Other airport codes are inconspicuous in origin, and each has its own peculiarities:
In Asia, codes that do not correspond with their city's names include Niigata's KIJ, Nanchang's KHN, Pyongyang's FNJ, and Kobe's UKB.

Multiple codes for a single airport

, which serves three countries, has three airport codes: BSL, MLH, EAP

Airport codes using the English name of the city

Some European cities have a different name in their respective language than in English, yet the airport code represents only the English name. Examples include:
Some airports are identified even in the colloquial speech by their airport code. The most notable examples are LAX and JFK.

National policies

United States

Since the U.S. Navy reserved "N" codes and to prevent confusion with Federal Communications Commission broadcast call signs beginning with "W" and "K", certain U.S. cities which begin with these letters had to adopt "irregular" airport codes when their airports opened: EWR for Newark, ORF for Norfolk, Virginia, EYW for Key West, Florida, OME for Nome and APC for Napa, California. This "rule" does not apply outside the United States: Karachi is KHI, Warsaw is WAW, and Nagoya is NGO. In addition, since three letter codes starting with Q are widely used in radio communication, cities with "Q" beginning their name also had to find alternate codes, as in the case of Qiqihar, Quetta, Quito, and Quimper.
IATA codes should not be confused with the FAA identifiers of US airports. Most FAA identifiers agree with the corresponding IATA codes, but some do not, such as Saipan whose FAA identifier is GSN and its IATA code is SPN, and some coincide with IATA codes of non-US airports.

Canada

Most large airports in Canada have codes that begin with the letter "Y", although not all "Y" codes are Canadian and not all Canadian airports start with the letter "Y". Many Canadian airports have a code that starts with W, X or Z, but none of these are major airports. When the Canadian transcontinental railways were built, each station was assigned its own two-letter Morse code. VR stands for Vancouver, TZ Toronto, QB Quebec, WG Winnipeg, SJ Saint John, YC Calgary, OW Ottawa, EG Edmonton, etc. When the Canadian government established airports, it used the existing railway codes for them as well. If the airport had a weather station, authorities added a "Y" to the front of the code, meaning "Yes" to indicate it had a weather station or some other letter to indicate it did not. When international codes were created in cooperation with the United States, because "Y" was seldom used in the US, Canada simply used the weather station codes for its airports, changing the "Y" to a "Z" if it conflicted with an airport code already in use. The result is that most major Canadian airport codes start with "Y" followed by two letters in the city's name: YOW for Ottawa, YWG for Winnipeg, YYC for Calgary, and YVR for Vancouver, whereas other Canadian airports append the two-letter code of the radio beacons that were the closest to the actual airport, such as YQX in Gander and YXS in Prince George.
Four of the ten provincial capital airports in Canada have ended up with codes beginning with YY, including YYZ for Toronto, Ontario, YYJ for Victoria, British Columbia, YYT for St. John's, Newfoundland, and YYG for Charlottetown, Prince Edward Island. Canada's largest airport is YYZ for Toronto–Pearson. YUL is used for Montréal–Trudeau. While these codes make it difficult for the public to associate them with a particular Canadian city, some codes have become popular in usage despite their cryptic nature, particularly at the largest airports. Toronto's code has entered pop culture in the form of "YYZ", a song by the rock band Rush which utilizes the Morse code signal as a musical motif. Some airports have started using their IATA codes as marketing brands. Calgary International Airport has begun using its airport code YYC as a marketing brand and name for the airport authority web site, while Vancouver International Airport advertises as YVR.

New Zealand

Numerous New Zealand airports use codes which contain a letter Z, to distinguish them from similar airport names in other countries. Examples include HLZ for Hamilton, ZQN for Queenstown, and WSZ for Westport.

Lack of codes

There are several airports with scheduled service that have not been assigned ICAO codes that do have IATA codes. For example, several airports in Alaska have scheduled commercial service, such as Stebbins and Nanwalek, which use FAA codes instead. There are also airports with scheduled service for which there are ICAO codes but not IATA codes, such as Nkhotakota Airport/Tangole Airport in Malawi or Chōfu Airport in Tokyo, Japan. There are also several minor airports in Russia which instead use internal Russian codes for booking. Flights to these airports cannot be booked through the international air booking systems or have luggage transferred to there, and thus, they are booked instead through the airline or a domestic booking system. Thus, neither system completely includes all airports with scheduled service.