Semi-rigid airship


A semi-rigid airship is an airship which has a stiff keel or truss supporting the main envelope along its length. The keel may be partially flexible or articulated and may be located inside or outside the main envelope. The outer shape of the airship is maintained by gas pressure, as with the non-rigid "blimp". Semi-rigid dirigibles were built in significant quantity from the late 19th century but in the late 1930s they fell out of favour along with rigid airships. No more were constructed until the design was revived by the Zeppelin NT in 1997.
Semi-rigid construction is lighter-weight than the outer framework of a rigid airship, while it allows greater loading than a non-rigid type.

Principle

More or less integrally attached to the hull are the gondola, engines and sometimes the empennage. The framework has the task of distributing the suspension loads of these attachments and the lifting gas loads evenly throughout the whole hull's surface and may also partially relieve stresses on the hull during manoeuvres. In early airships which relied on nets, fabric bands, or complicated systems of rope rigging to unite the lifting envelope with the other parts of the ship, semi-rigid construction was able to achieve improvements in weight, aerodynamic, and structural performance. The boundary between semi-rigid and non-rigid airships is vague. Especially with small types, it is unclear whether the structure is merely an extended gondola or a proper structural keel.
As in non-rigid airships, the hull's aerodynamic shape is maintained by an overpressure of the gas inside and light framework at the nose and tail. Changes in volume of the lifting gas is balanced using ballonets. Ballonets also may serve to provide pitch control. For small types the lifting gas is sometimes held in the hull itself, while larger types tend to use separate gas cells which mitigates the consequences of a single gas cell failure and helps reduce the amount of overpressure needed.

History

In the first decade of the twentieth century, semi-rigid airships were considered more suitable for military use because, unlike rigid airships, they could be deflated, stored and transported by land or by sea. Non-rigid airships had a limited lifting capacity due to the strength limitations of the envelope and rigging materials then in use.
An early successful example is the Groß-Basenach design made by Major Hans Groß from the Luftschiffer-Bataillon Nr. 1 in Berlin, the experimental first ship flying in 1907. It had a rigid keel under the envelope. Four more military airships of this design were built, and often rebuilt, designated M I to M IV, up to 1914.
The most advanced construction of semi-rigid airships between the two World Wars took place in Italy. There, the state-factory Stabilimento di Costruzioni Aeronautiche constructed several. Umberto Nobile, later General and director, was its most well-known member, and he designed and flew several semi-rigid airships, including the Norge and Italia, for his overflights of the North Pole, and the W6 OSOAVIAKhIM, for the Soviet Union's airship program.

List of other semi-rigid airships

Pre-War and WWI
1920s and 1930s
Nobile's company designed or built the following airships:
, the only manned semi-rigid model of airship in active operation is the Zeppelin NT. It comprises a single gas cell kept at a slight over-pressure, ballonets to maintain constant volume, and a triangular keel structure internal to the cell. Three of these will be American-based airships.
CL160 "Cargolifter" was an unrealised design of the now liquidated German Cargolifter AG. Cargolifter Joey was a small semi-rigid experimental airship produced to test the design