Keel


The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in British and American shipbuilding traditions the construction is dated from this event.

Etymology

The word "keel" comes from Old English cēol, Old Norse kjóll, = "ship" or "keel". It has the distinction of being regarded by some scholars as the first word in the English language recorded in writing, having been recorded by Gildas in his 6th century Latin work De Excidio et Conquestu Britanniae, under the spelling cyulae.
word for "keel" and is the origin of the term careen. An example of this use is Careening Cove, a suburb of Sydney, Australia, where careening was carried out in early colonial days.

Structural keels

A structural keel is the bottom-most structural member around which the hull of a ship is built. The keel runs along the centerline of the ship, from the bow to the stern. The keel is often the first part of a ship's hull to be constructed, and laying the keel, or placing the keel in the cradle in which the ship will be built may mark the start time of its construction. Large, modern ships are now often built in a series of pre-fabricated, complete hull sections rather than being built around a single keel, so shipbuilding process commences with cutting the first sheet of steel.
The most common type of keel is the "flat plate keel", and this is fitted in the majority of ocean-going ships and other vessels. A form of keel found on smaller vessels is the "bar keel", which may be fitted in trawlers, tugs, and smaller ferries. Where grounding is possible, this type of keel is suitable with its massive scantlings, but there is always a problem of the increased draft with no additional cargo capacity. If a double bottom is fitted, the keel is almost inevitably of the flat plate type, bar keels often being associated with open floors, where the plate keel may also be fitted.

Hydrodynamic keels

Hydrodynamic keels have the primary purpose of interacting with the water and are typical of certain sailboats. Fixed hydrodynamic keels have the structural strength to support the weight of the boat. with a fin keel

Sailboat keels

In sailboats, keels serve two purposes: 1) as an underwater foil to minimize the lateral motion of the vessel under sail as a counterweight to the lateral force of the wind on the sail that causes rolling to the side. As an underwater foil, a keel uses the forward motion of the boat to generate lift to counteract the leeward force of the wind. Related foils include centerboards and daggerboards, which do not have the secondary purpose of being a counterweight. As counterweight, a keel increasingly offsets the heeling moment with increasing angle of heel.
Moveable sailboat keels may pivot, retract upwards, or swing sideways in the water to move the ballasting effect to one side and allow the boat to sail in a more upright position.