Roland V-Drums


V-Drums is a variety of electronic drums, drum brain modules, and related electronic percussion product manufactured and trademarked by Roland Corporation.
The primary V-Drums products are complete electronic drum kits. These vary in price and complexity, ranging from a few hundred dollars to approximately US$7,499. Components such as additional pads, cymbal pads, triggers, mounting hardware, and modules are also sold individually to augment an existing kit.
Like most electronic drum modules, V-Drums drum modules are MIDI-capable. This enables the player to use a V-Drums kit to control not only the kit itself, but other MIDI-capable instruments, such as digital samplers. MIDI also allows V-Drums kits to be controlled by other MIDI-capable instruments. V-Drums, like most electronic drum kits, can output to an amplifier, recording device, or headphones.

The Roland V-Drums System

Each V-Drums kit is composed of the following:
V-Drums trigger devices are of four major types: mesh-head drum pads, rubber pads, cymbal pads and acoustic drum triggers. Mesh-head pads look very similar to acoustic drums, and attempt to emulate their feel. The simpler, more generic type is a rubber pad, which is less expensive, but also looks and feels less like an acoustic drum. There are several models of cymbal pads. The more expensive ones attempt to emulate the physical properties of acoustic cymbals of various types, while the simpler, less expensive cymbal pads are less realistic. Acoustic drum triggers can be used to provide trigger signals from standard acoustic drums.
From an electrical point of view, trigger pads can be of the following types:
Round rubber pads were introduced with the TD-7 drum module in 1992 and were universally used as trigger pads for drums and cymbals. Since the introduction of mesh-head drum pads and cymbal-shaped trigger pads, standard rubber pads are only used as tom-tom and bass drum trigger pads on Roland's less expensive drum kits. More expensive kits don't include any rubber pads at all any more.
The downsides of rubber pads are their less realistic rebound and their relatively high ambient noise level, but their lower price, and increased durability, still makes them a better choice in some cases.

Cloth-head pads

Cloth-head drum pads were introduced with the KD-9 in 2011, using a cloth-like material as the drum head with an underlying, relatively thick layer of foam. These pads are softer than rubber pads and feel more realistic, while producing less ambient noise. They are only available in small sizes though, and the head tension cannot be adjusted like on mesh-head pads.

Mesh-head pads

Roland V-Drums mesh-head triggers resemble acoustic drums in both appearance and feel. The striking surface is a two-layer taut woven mesh of fibers fitted with several electronic sensors. This allows the mesh-head trigger to respond to the play of a drumstick in a manner that feels more like real drums than their earlier rubber predecessors. Roland developers have stated that the design of the mesh-head V-Pad was inspired in part by a small toy trampoline.
In 1997, Roland developed and patented an updated version of mesh-head drum triggers, a key feature of the V-Drums line. As such, the name "V-Drums" sometimes refers specifically to Roland's mesh-head based drum triggers. The company began marketing the mesh-head triggers under the "V-Drums" name in 1997, in conjunction with the TD-10 drum module.
Roland mesh-head V-Drums have a playable rim which has its own electronic sensors. Many drummers who formerly eschewed electronic drums because of their lack of authentic feel have adopted V-Drums and other mesh-head drum products due to the recent advances of mesh-head technology.
Mesh-head triggers have created an expanded market for electronic drum kits because electronic drum kits, especially mesh-head based ones, make little or no unwanted ambient noise.Mesh heads used in V-Drums kits today are made by the American drumhead company Remo.

Acoustic drum triggers

Roland also makes acoustic drum triggers, which can be mounted on the rims of standard acoustic drums and provide a trigger signal from those drums, effectively turning them into trigger pads. The acoustic drumhead can either be left on the drum, to get the acoustic sound as well as a trigger signal, or the drumhead can be replaced with a mesh-head to lower ambient noise, if only the trigger signal is needed.

Cymbal pads

In the early 2000s, Roland moved away from using standard rubber pads as cymbal triggers and introduced new cymbal-shaped trigger pads with a rubber surface, which they call V-Cymbals.
The more expensive cymbal pads can swing freely after being hit, so they feel more like real cymbals, while the less expensive cymbal pads are not movable and always stay in their fixed position, thus feeling less realistic. Most of the movable pads also feature a third bell zone, which is triggered when hitting the bell area of the cymbal pad. These cymbal pads are called three-way cymbals because of their three trigger zones.

Electronic hi-hats

Electronic hi-hats are always made up of two components: a trigger pad to detect hits, and a variable resistor-based hi-hat controller to detect the foot position, so the drum module can determine whether the hi-hat is supposed to be open or closed.
The simpler, less expensive solution uses a simple fixed V-Cymbal pad in combination with a separate foot pedal controller, which allows the drum module to replicate the sound of a hi-hat, but does not emulate the feel and scope of expressiveness of acoustic hi-hats.
The more expensive V-Hi-Hats integrate trigger pad and controller into a set of two opposing pieces, designed to be mounted on a conventional hi-hat stand. Because the hi-hat pad moves with the position of the pedal and can swing freely when the hi-hat is opened, this solution feels much more authentic. The most complex and most expensive VH-13 V-Hi-Hat and the older VH-12 can also detect different amounts of foot pressure in the closed position, but they are only compatible with the TD-30 and the older TD-12 and TD-20 drum modules. The simpler VH-11 can be used with more modules, but it cannot sense foot pressure in the closed position.

Available drum and cymbal pads

Available hi-hat controllers

Pad/Module Compatibility

Generally, all Roland drum pads and cymbal pads can be connected to any input on any Roland drum module, and the head/bow zone will always work. However, when more capable pads are connected to less capable inputs, some zones on the drum pad cannot be used. Connecting less capable pads to more capable inputs usually lets you use all zones of the pad.
Drum pads and cymbal pads from other manufacturers are also generally compatible with Roland drum modules as long as they use a piezo as the head/bow trigger, but zones other than head/bow are sometimes problematic, especially on three-zone pads. Also, the module settings may need some tweaking. Hi-Hat controllers however are not usually compatible between manufacturers.
There are different kinds of stereo pads and stereo inputs. While all types of stereo pads and inputs do have two channels, they are still electrically different, so not all combinations of stereo pads and stereo inputs let you use all zones/features.
There's also a detailed compatibility chart for current Roland trigger devices and drum modules on one of the last pages of Roland's V-Drums catalog, which is also available as a PDF download from their home page. Discontinued modules are not included in their chart though.

Roland drum modules

Roland drum modules range in features and price from the top-of-the-line TD-50 to the TD-27, TD-17, TD-4, TD-1 and HD-3. Higher model numbers denote more advanced models, while lower numbers are used for less expensive ones. The TD-30, TD-25, TD-20, TD-15, TD-12, TD-11, TD-10, TD-9, TD-8, TD-7, TD-6, TD-5, TD-3 and HD-1 are out of production.

Available drum modules

Availability Timeline


ImageSize = width:960 height:auto barincrement:20
PlotArea = left:100 bottom:120 top:0 right:15
Alignbars = justify
DateFormat = yyyy
Period = from:1991 till:2021
TimeAxis = orientation:horizontal format:yyyy
Legend = orientation:vertical position:bottom columns:3
Colors =
id:DModuleTop value:rgb legend:Flagship_Drum_Module
id:DModuleAdv value:red legend:Advanced_Drum_Module
id:DModuleMid value:orange legend:Mid-Level_Drum_Module
id:DModuleEntry value:yellow2 legend:Entry_Level_Drum_Module
id:DModulePort value:blue legend:Drum_Module_for_Small/Portable_Sets
id:DModuleLite value:powderblue legend:Drum_Module_for_Lite_Sets
id:DModuleOld value:lightpurple legend:Older_Drum_Module
id:TModule value:teal legend:Trigger_Module
id:COSM value:gray legend:COSM_introduced
id:SuperNatural value:gray legend:SuperNATURAL_introduced
id:bars value:gray
id:major value:gray
id:minor value:gray
BackgroundColors = bars:bars
ScaleMajor = gridcolor:major increment:1 start:1991
ScaleMinor = gridcolor:minor unit:year increment:1 start:1991
LineData =
at:1997 color:COSM layer:back
at:2012 color:SuperNatural layer:back
BarData =
bar:HD1 text:"HD-1"
bar:HD3 text:"HD-3"
bar:TD1 text:"TD-1"
bar:TD3 text:"TD-3"
bar:TD4 text:"TD-4"
bar:TD5 text:"TD-5"
bar:TD6 text:"TD-6"
bar:TD6V text:"TD-6V"
bar:TD7 text:"TD-7"
bar:TD8 text:"TD-8"
bar:TD9 text:"TD-9"
bar:TD10 text:"TD-10"
bar:TDW10 text:"TD-10+TDW-1"
bar:TD11 text:"TD-11"
bar:TD12 text:"TD-12"
bar:TD15 text:"TD-15"
bar:TD17 text:"TD-17"
bar:TD20 text:"TD-20"
bar:TDW20 text:"TD-20X/TDW-20"
bar:TD25 text:"TD-25"
bar:TD27 text:"TD-27"
bar:TD30 text:"TD-30"
bar:TD50 text:"TD-50"
bar:TM2 text:"TM-2"
bar:TM6P text:"TM-6 Pro"
bar:TMC6 text:"TMC-6"
PlotData=
width:10 textcolor:black align:left anchor:from shift:
bar:HD1 from:2007 till:2012 color:DModuleLite text:"HD-1"
bar:HD3 from:2012 till:2018 color:DModuleLite text:"HD-3"
bar:TD1 from:2014 till:end color:DModulePort text:"TD-1"
bar:TD3 from:2004 till:2009 color:DModuleEntry text:"TD-3"
bar:TD4 from:2009 till:2012 color:DModuleEntry text:"TD-4"
bar:TD4 from:2012 till:2016 color:DModulePort text:"TD-4KP"
bar:TD5 from:1994 till:2001 color:DModuleOld text:"TD-5"
bar:TD6 from:2001 till:2003 color:DModuleMid text:"TD-6"
bar:TD6V from:2003 till:2008 color:DModuleMid text:"TD-6V"
bar:TD7 from:1992 till:1999 color:DModuleOld text:"TD-7"
bar:TD8 from:1999 till:2005 color:DModuleAdv text:"TD-8"
bar:TD9 from:2008 till:2012 color:DModuleMid text:"TD-9"
bar:TD9 at:2011 mark: text:"v2.0"
bar:TD10 from:1997 till:2000 color:DModuleTop text:"TD-10"
bar:TDW10 from:2000 till:2004 color:DModuleTop text:"TD-10+TDW-1"
bar:TD11 from:2012 till:2018 color:DModuleEntry text:"TD-11"
bar:TD12 from:2005 till:2012 color:DModuleAdv text:"TD-12"
bar:TD15 from:2012 till:2015 color:DModuleMid text:"TD-15"
bar:TD17 from:2018 till:end color:DModuleEntry text:"TD-17"
bar:TD20 from:2004 till:2008 color:DModuleTop text:"TD-20"
bar:TDW20 from:2008 till:2012 color:DModuleTop text:"TD-20X/TDW-20"
bar:TD25 from:2015 till:2020 color:DModuleMid text:"TD-25"
bar:TD27 from:2020 till:end color:DModuleMid text:"TD-27"
bar:TD30 from:2012 till:2016 color:DModuleTop text:"TD-30"
bar:TD50 from:2016 till:end color:DModuleTop text:"TD-50"
bar:TM2 from:2014 till:end color:TModule text:"TM-2"
bar:TM6P from:2018 till:end color:TModule text:"TM-6 Pro"
bar:TMC6 from:2002 till:2015 color:TModule text:"TMC-6"

Drum module input capabilities

It is important to note that not all drum module inputs have the same capabilities. Besides the obvious differences between mono, stereo and three-way inputs, which support mono, stereo or three-zone pads accordingly, there are additional differences in the capabilities of stereo inputs. While some stereo inputs only support pads with a piezo and a switch, others also support pads with two piezos. Also, some stereo inputs are only intended to be split into two mono inputs by using an insert cable. Certain pairs of stereo inputs can be configured to form one three-way input.
On some drum modules, some inputs may support additional features such as positional sensing or brush sweeps.
The capabilities of drum module inputs are listed in the table below. For details about which type of trigger pads are compatible with which type of drum module input, see section Pad/Module Compatibility above.
The column 'Connector Type' shows the number of trigger inputs with audio jack sockets and the number of trigger inputs with audio jack plugs on a proprietary wiring harness. If a module uses a wiring harness, inputs that feature an audio jack socket are indicated with an asterisk next to the input type.

Drum sets

Roland V-Drums components are typically sold as drum sets, which are made up of drum and cymbal pads, a hi-hat pad and controller, a drum module and a drum rack. Sometimes, additional hardware such as a kick drum pedal and a hi-hat stand is also included.

High-end V-Drums sets

Roland's most advanced and most expensive V-Drums sets include:
In the past, Roland also sold V-Stage drum sets, which had smaller pads and came with a slightly stripped-down drum module with fewer inputs, but still most of the advanced features of the flagship modules. The V-Stage drum sets were discontinued in 2012 when the TD-30 was introduced. Instead, Roland is now also offering a V-Pro drum set with smaller and less expensive pads.

Mid-tier V-Drum sets

Roland's mid-tier V-Drums sets include:
Roland's entry level V-Drum sets include:
Older drum sets with the TD-7 and the TD-5 drum module had all rubber pads as drum and cymbal pads, simple kick-drum pads, and a rubber pad and foot controller for the hi-hat. Although they were not marketed as V-Drums at the time, they used the same technology and the trigger pads continued to be used in later V-Drum sets. TD-7 and TD-5 drum sets were discontinued in the late 1990s when the TD-10 and TD-8 were introduced.

Available drum sets

Artists who use Roland V-Drums