Organogold chemistry
Organogold chemistry is the study of compounds containing gold–carbon bonds. They are studied in academic research, but have not received widespread use otherwise. The dominant oxidation states for organogold compounds are I with coordination number 2 and a linear molecular geometry and III with CN = 4 and a square planar molecular geometry. The first organogold compound discovered was gold carbide Au2C2, which was first prepared in 1900.
Gold(I)
Gold complexes are 2-coordinate, linear, diamagnetic, 14 electron species. They typically exist as adducts LAuR with as ligand L for instance a triphenylphosphine or an isocyanide. The ligand prevents reduction of Au to metallic Au with dimerization of the organic residue. Gold can also exist as the aurate M whereby the cation is usually fitted with a complexing agent to improve stability. The AuR2− anion is also linear just as other M species such as Hg2 and Pd22+. Gold is known to form acetylides, carbenes and carbynes. The classic method for the preparation of LAuR compounds is by reaction of a Grignard reagent with a gold halide. A subsequent reaction with an organolithium R-Li forms the ate complex.In a special group of compounds, an aryl carbon atom acts as a bridge between two gold atoms. One such compound, 5, is formed in a reaction between AuCl and the mesityl Grignard. Carbon can be coordinated with gold up to a value to 6. Compounds of the type C4 are isolobal with methane and those of type C5+ isolobal with the methanium ion. These hypercoordinated organogold clusters are often stabilized by aurophilic interactions between the formally closed-shell gold centers.
Gold cyanide compounds are of some importance to gold cyanidation, a process for the extraction of gold from low-grade ore. The carbon to metal bond in metal cyanides is usually ionic but evidence exists that the C-Au bonding in the gold cyanide ion is covalent.
Gold(III)
Gold complexes are 4 coordinate, square planar, diamagnetic, toxic, 16 electron species. When the formal coordination number is less than 4, ligands such as chlorine can make up for it by forming a bridging ligand. Intramolecular chelation is another strategy. In general gold compounds are toxic and therefore less studied than gold. Monoarylgold complexes are one well-studied class of complexes. They are often prepared by direct electrophilic auration of arenes by AuCl3. Homoleptic tetraalkylaurate complexes are also well-characterized.Gold catalysis
General considerations
Gold-catalyzed reactions fall into two major categories: heterogeneous catalysis including catalysts by gold nanoparticles and thiol-monolayer gold surfaces, and catalysts on alumina support, including alumina supported Au/CeO2. These catalysts have been investigated for industrially important processes like the oxidation of alcohols, oxidation of carbon monoxide, and various selective hydrogenation reactions. Though often efficient and exhibiting useful or unique selectivities, there is considerable uncertainty with respect to the mechanism of processes catalyzed by various heterogeneous gold catalysts, even compared to other heterogeneous transition metal catalysts.In contrast, homogeneous catalysis with gold uses simple or ligand-bound gold or gold compounds that are soluble in organic solvents and is used for the synthesis of fine chemicals in organic chemistry. Binary gold halides and simple complexes, including gold chloride, gold chloride, and chloroauric acid, have been employed as complexes. These gold sources, however, quickly give rise to ill-defined and easily deactivated active catalysts in solution. The development of well-defined phosphine- or NHC-ligated gold complexes was an important advance and led to significant increase in interest in the synthetic applications of gold catalysis. Ligated gold complexes are typically prepared and stored as the bench-stable chlorides, LAuCl, e.g., chlorogold, which are typically activated via halide abstraction with silver salts like AgOTf, AgBF4, or AgSbF6 to generate a cationic gold species. Although the coordinatively unsaturated complex "LAu+" is notionally generated from a LAuCl/AgX mixture, the exact nature of the cationic gold species and the role of the silver salt remains somewhat contentious. The para-nitrobenzoate, bistriflimide, and certain nitrile complexes represent catalytically active yet isolable silver-free precatalysts.
Cationic gold forms π-complexes with alkene or alkyne bonds, following the Dewar–Chatt–Duncanson model. Gold is certainly not the only metal showing this type of bonding and reactivity, several metal ions isolobal with the simple proton do as well: for example, mercury and platinum. Electrophilic ions and complexes such as these with a strong propensity to form π-complexes are generally known as pi-acids.
Gold-alkene and -alkyne complexes are electrophilic and susceptible toward nucleophilic attack. In oxymercuration the resultant organomercurial species is generated stoichiometrically, and requires an additional step to liberate the product. In the case of gold, protonolysis of the Au-C bond closes the catalytic cycle, allowing the coordination of another substrate. Some practical advantages of gold air stability, 2) tolerance towards adventitious moisture relatively low toxicity compared to other pi-acids and Hg). Chemically, Au complexes typically do not undergo oxidation to higher oxidation states, and Au-alkyls and -vinyls are not susceptible to β hydride elimination.
Historical development
In 1976, Thomas and coworkers reported conversion of phenylacetylene to acetophenone using tetrachloroauric acid in a 37% yield. In this reaction gold was used as a homogeneous catalyst replacing mercury in oxymercuration. This same study lists a published yield >150%, indicating catalysis that perhaps was not acknowledged by the chemists.In 1991, Utimoto reacted gold with alkynes and water. Teles identified a major drawback of this method as Au was rapidly reduced to catalytically dead metallic gold and in 1998 returned to the theme of ligand supported Au for the same transformation:
This particular reaction demonstrated fantastic catalytic efficiency and would trigger a flurry of research into the use of phosphinegold complexes for the activation C-C multiple bonds in the years to come. In spite of the lower stability of gold complexes under catalytic conditions, simple AuCl3 was also found to be an efficient catalyst in some cases. For instance, Hashmi reported an AuCl3-catalyzed alkyne / furan Diels–Alder reaction - a type of cycloaddition that does not ordinarily occur - for the synthesis of 2,3-disubstituted phenols:
Further mechanistic studies conclude that this is not a concerted transformation, but rather an initial alkyne hydroarylation followed by a series of non-obvious intramolecular rearrangements, concluding with a 6π electrocyclization and rearomatization.
Relativistic effects are significant in organogold chemistry due to the large nuclear charge of the metal. As a consequence of relativistically expanded 5d orbitals, the LAu fragment can stabilize a neighboring carbocation via electron donation into the empty p-type orbital. Thus, in addition to their expected carbocation-like reactivity, these cations also exhibit significant carbene character, a property that has been exploited in catalytic transformations such as cyclopropanation and C-H insertion. Propargyl esters can serve as precursors for cationic gold-vinylcarbene intermediates, which can react with alkenes in a concerted manner to afford the cyclopropanation product. The use of a chiral ligand resulted in good to excellent levels of enantioselectivity.
Although Echavarren first reported the preparation of chiral bisphosphinedigold complexes for enantioselective gold catalysis proceeding via the typical pi-activation mechanism, an early, atypical example of enantioselective catalysis by gold was described by Hayashi and Ito in 1986. In this process, benzaldehyde and methyl isocyanoacetate undergo cyclization in the presence of a chiral ferrocenylphosphine ligand and a bisgold complex to form a chiral oxazoline. Since oxazolines can be hydrolyzed to provide a 1,2-aminoalcohol, this reaction constitutes the first example of a catalytic, asymmetric aldol reaction.
In contrast to the other reactions described above, this reaction does not involve activation of a C-C double or triple bond by gold. In a simple mechanistic picture, gold simultaneously coordinates to two phosphine ligands and the carbon isocyanate group which is then attacked by the carbonyl group. Further studies on the bonding mode of Au indicate that this simple picture may have to be revised.
Heterogeneous gold catalysis is an older science. Gold is an attractive metal to use because of its stability against oxidation and its variety in morphology for instance gold cluster materials. Gold has been shown to be effective in low-temperature CO oxidation and acetylene hydrochlorination to vinyl chlorides. The exact nature of the catalytic site in this type of process is debated. The notion that gold can catalyse a reaction does not imply it is the only way. However, other metals can do the same job inexpensively, notably in recent years iron.
Gold catalyzed reactions
Although of no commercial importance, gold catalyzes many organic transformations, usually carbon-carbon bond formation from Au, and C-X bond formation from the Au state, due to that ion's harder Lewis acidity. During the past decade, several studies have demonstrated that gold can efficiently catalyze C-C and C-heteroatom cross-coupling reactions that proceed through an Au/Au cycle. Hong C. Shen summarized homogeneous reactions forming cyclic compounds into 4 main categories:- heteroatom nucleophilic addition to unsaturated C-C bonds, especially to form small heterocycles
- Hydroarylation: basically a Friedel-Crafts reaction using metal-alkyne complexes. Example, the reaction of mesitylene with phenylacetylene:
- Enyne cyclization, in particular cycloisomerization, one early example being a 5-exo-dig 1,6 enyne cycloisomerization:
- cycloaddition reactions with early example the cycloaddition of a nitrile oxide with an alkyne.