Mauser C96


The Mauser C96 is a semi-automatic pistol that was originally produced by German arms manufacturer Mauser from 1896 to 1937. Unlicensed copies of the gun were also manufactured in Spain and China in the first half of the 20th century.
The distinctive characteristics of the C96 are the integral box magazine in front of the trigger, the long barrel, the wooden shoulder stock which gives it the stability of a short-barreled rifle and doubles as a holster or carrying case, and a grip shaped like the handle of a broom. The grip earned the gun the nickname "broomhandle" in the English-speaking world, because of its round wooden handle, and in China the C96 was nicknamed the "box cannon" because of its rectangular internal magazine and the fact that it could be holstered in its wooden box-like detachable stock.
With its long barrel and high-velocity cartridge, the Mauser C96 had superior range and better penetration than most other pistols of its era; the 7.63×25mm Mauser cartridge was the highest-velocity commercially manufactured pistol cartridge until the advent of the.357 Magnum cartridge in 1935.
Mauser manufactured approximately 1 million C96 pistols, while the number produced in Spain and China was large but unknown due to the non-existence or poor preservation of production records from those countries.

History

Within a year of its introduction in 1896, the C96 had been sold to governments and commercially to civilians and individual military officers.
The Mauser C96 pistol was extremely popular with British officers at the time, and many purchased it privately. Mauser supplied the C96 to Westley Richards in the UK for resale. By the onset of World War I, the C96's popularity with the British military had waned.
As a military sidearm, the pistols saw service in various colonial wars, as well as World War I, the Easter Rising, the Irish Civil War, where the gun was nicknamed the "Peter the Painter", as the pistol grip looked like a brush handle], the Estonian War of Independence, the Spanish Civil War, the Chinese Civil War, and World War II. The C96 also became a staple of Bolshevik commissars from one side and various warlords and gang leaders from another in the Russian Civil War, known simply as "the Mauser". Communist revolutionaries Yakov Yurovsky and Peter Ermakov used Mausers to execute the former Russian imperial family in July 1918.
Winston Churchill was fond of the Mauser C96 and used one at the 1898 Battle of Omdurman and during the Second Boer War; Lawrence of Arabia carried a Mauser C96 for a period, during his time in the Middle East. Indian Revolutionary Ram Prasad Bismil and his partymen used these Mauser pistols in the historic Kakori train robbery in August 1925. Chinese Communist General Zhu De carried a Mauser C96 during his Nanchang Uprising and later conflicts; his gun can be viewed in the Beijing war museum.
Three Mauser C96s were used in the killing of Spanish prime minister Eduardo Dato in 1921, and a Mauser C96 was used in the assassination of the King of Yugoslavia Alexander I of Yugoslavia in 1934.
Imported and domestic copies of the C96 were used extensively by the Chinese in the Second Sino-Japanese War and the Chinese Civil War, as well as by the Spanish during the Spanish Civil War and the Germans in World War II.
Besides the standard 7.63×25 mm chambering, C96 pistols were also commonly chambered for 9×19mm Parabellum, with a small number also being produced in 9 mm Mauser Export. In 1940, Mauser officials proposed using the C-96 as the vehicle for an upgrade to the 9×25mm Mauser Export cartridge to match the ballistics of the.357 Magnum. Lastly, there was a Chinese-manufactured model chambered for.45 ACP. Despite the pistol's worldwide popularity and fame, China was the only nation to use the C96 as the primary service pistol of its military and police.

Contract variants

1897 Turkish Army Mauser

Mauser's first military contract was with the Ottoman Turkish government in 1897. They ordered 1,000 pistols; they had their own serial number range, running from 1 to 1000. They differ in that they use a non-Arabic number system on the tangent sight and the weapon is designated in this number system in the Islamic calendar year "1314" rather than the Gregorian calendar year "1896 / 1897". Markings include a six-pointed star on both sides of the chamber and of Sultan Abdul Hamid II and the Muslim year 1314 on the square left rear frame panel.

1899 Italian Navy Mauser

In 1899, the Italian government ordered Mauser's first major military contract; an order for 5,000 C96 pistols for the Italian Royal Navy. They differ in that their receivers were "slab-sided". They also have a "ring hammer" instead of the early "cone hammer". These guns had their own serial number range, running from 1 to 5000.

1910 Persian contract Mauser

The Persian government ordered 1,000 pistols. They have the Persian government's "Lion and Sun" insignia on the rectangular milled panel on the left side of the receiver and the serial numbers range from 154000 to 154999. It is often confused with the Turkish contract Mauser.

M1916 Austrian contract

ordered 50,000 Mausers in the standard 7.63×25mm. A small number were rebarreled to 8mm Gasser for an unknown reason.

M1916 Prussian "red 9"

During World War I, the Imperial German Army contracted with Mauser for 150,000 C96 pistols chambered in 9mm Parabellum to offset the slow production of the standard-issue Luger P08 pistol. This variant of the C96 was named the "red 9" after a large number 9 burned and painted in red into the grip panels to warn the pistols' users not to incorrectly load them with 7.63 mm ammunition. Of the 150,000 pistols commissioned, approximately 137,000 were delivered before the war ended. Because the army delegated the branding to unit armourers, not all 9 mm pistols carry the nine. Original 9mm pistols can be told from 7.63mm-to-9mm conversions because they have 9mm-rated sights rather than 7.63mm-rated sights.

M1920 French police contract

The French government set up an order for 2,000 pistols with barrels for the Gendarmerie Nationale. The pistol had black ebonite grips rather than wooden ones.

WW2 Luftwaffe contract

The German government purchased 7,800 commercial M30 pistols in 1940 for use by the Luftwaffe. They have Wehrmacht proof marks and the Mauser serial numbers come from the early- to mid-1930s. The weapon had ceased production in 1937 but the order was filled from remaining stocks. According to Kersten, Moll and Schmid, these were likely purchased by the High Command of the Armed Forces and issued to motorcycle and flak crews of the Luftwaffe.

Major variants

There were many variants of the C96 besides the standard commercial model; the most common are detailed below.

M1896 Kavallerie Karabiner

One of the experimental ideas was the creation of a pistol-carbine for use by light cavalry. They had a "slab-sided" receiver, standard 10-round magazine, a permanently affixed wooden stock and forend, and a lengthened or barrel. They were dropped from production after 1899 due to poor sales and little military interest.
There was limited sporting interest in the carbine version and due to small production numbers it is a highly prized collectible priced at about twice the value of the pistol version. Recently, importers like Navy Arms imported replica Mauser carbines with 16-inch or longer barrels for sale in the US.

M1896 compact Mauser

A version of the Mauser pistol with a full-sized grip, six-shot internal magazine, and a barrel. Production was phased out by 1899.

M1896 officer's model

This is the unofficial term for a variant compact Mauser with a curved wooden or hard-rubber grip, like that of the Reichsrevolver. The name comes from the US Army designation of the Mauser pistol sent to participate in their self-loading pistol trials.

M1898 pistol carbine

This is the first model to come cut for a combination wooden stock-holster. The stock doubled as a case or holster and attached to a slot cut in the grip frame.

M1912 Mauser export model

This model was the first to chamber the 9×25mm Mauser export cartridge. It was designed to appeal to the arms markets in South America and China. Mauser C96 pistols in this caliber usually have an indentation milled into the upper surface of the magazine's follower to facilitate feeding of the straight-cased 9×25mm cartridge cases. The rifling in the barrel has a unique 13:8 twist. In addition, the flat surfaces extending around the chamber are longer to accommodate the higher pressures of the 9×25mm cartridge. Examples of Mauser C96s in this caliber are rare, but are still occasionally found on the private collector's market. The 9×25mm Mauser export caliber receded from the market as the armaments industry reoriented itself towards military manufacture during World War I, but the round enjoyed a resurgence in popularity as a submachine gun caliber in the 1930s.

M1917 Mauser trench carbine

This model featured an extended stock and barrel similar to the M1896 Kavallerie Karabiner. It also possessed a 40-round magazine and was chambered in 9×19mm Parabellum. The M1917 Mauser trench carbine was introduced during World War I and was intended as a cheaper replacement for the expensive Lange Pistole 08 in close-quarters combat. However, the Imperial German Army did not believe it was a cost-effective substitute, and the project was shortly abandoned with only a few ever made.

M1920 Mauser rework

The Treaty of Versailles imposed a number of restrictions on pistol barrel lengths and calibres on German arms manufacturers. Pistols for German government issue or domestic market sales could not have a barrel longer than 4 inches and could not be chambered for 9 mm cartridges.
The Weimar Republic banned the private ownership of military-issue or military-style weapons in an attempt to recover valuable arms from returning soldiers. The confiscated weapons were then used to arm government forces, leaving them with a hodge-podge of military and civilian arms. To meet the conditions of the Treaty of Versailles, a major reworking project was begun that set about converting these weapons.
To be compliant, pre-war C.96 models belonging to the Weimar government had to have their barrels cut down to. This meant that their tangent sights had to be replaced with fixed sights. They also had to be converted to the standard 7.63×25mm Mauser round, though a few hybrid Mausers were made with salvaged Luger barrels that were chambered for 7.65×21mm Parabellum. Compliant confiscated government-issue guns were marked M1920. This practice was continued on German service pistols even after the ban was ignored and the conversions had stopped.

M1921 "Bolo" Mauser

Mauser began manufacturing a compliant version of the C96 for commercial sale from 1920 to 1921. It featured smaller grips, a shorter barrel, and was chambered for the standard 7.63×25mm Mauser. An experimental 8.15×25.2mm Mauser cartridge was used to replace the banned 9×19mm Parabellum and 9×25mm Mauser Export cartridges for domestic sales but it never supplanted the 9mm caliber.
Mass-production of the weapon was from 1921 to 1930. It was sold in quantity to armies in the contested Baltic region and was carried by the Poles, Lithuanians, German Freikorps and White Russians. The Bolshevik government of the embryonic Soviet Union purchased large numbers of this model in the 1920s and also appropriated them from defeated enemies. The distinctive pistol became associated with the Bolsheviks and was thus nicknamed the "Bolo". The "Bolo" model was also popular elsewhere, as the shorter barrel and smaller overall size made the gun easier to conceal.
There was also a transitional version in 1930 that used the "Bolo" frame but with a longer barrel.

M1930 Mauser

Also known as the M30 by collectors, it was a simplification and improvement of the M1921 Mauser. It simplified production by removing several fine-machining details and reverted to the "pre-war" large grip and long barrel. The early model M30s had a barrel, but later models had the traditional barrel. It was made from 1930 until 1937.
Joseph Nickl designed a selective-fire conversion in 1930. It tended to "cook off" when fired in long bursts. Only 4,000 of this model were made between 1930 and 1931.
Since the M1932 / M712 variant was full-auto, the semi-auto M1930 it was derived from was sometimes called the M711 by war surplus dealers and collectors.

M1932/M712 ''Schnellfeuer''

The Spanish gunmaking firms of Beistegui Hermanos and Astra began producing detachable magazine-fed, select-fire versions of the C96 in 1927 and 1928 respectively, intended for export to the Far East.
Mauser began production of the Schnellfeuer, their own select-fire, detachable magazine version of the M30 designed by Karl Westinger. Production started in 1932 and ended in 1936, which has led to its unofficial designation of "M1932" by collectors. An extremely successful design, around 98,000 guns were made overall and they had their own series of serial numbers.
It was largely intended for export to South America and China or to the opposing sides in the later Spanish Civil War. From 1932 to 1935, the Yugoslavian military tested batches of the Schnellfeuer in both 7.63mm and 9mm Parabellum for the purpose of arming mountain troops and special operations units. Improvements requested by the Yugoslavs included a detachable barrel, improved front and rear sights, more durable parts to prevent breakage under sustained fire and lowered position of the shoulder stock to avoid "hammer bite".
Small numbers of M1932s were supplied to the German Wehrmacht during World War II, who designated it the M712.
The US National Firearms Act of 1934 placed a $200 tax on select-fire weapons, making exports of the Schnellfeuer guns to the US impractical since at the time this was roughly half the cost of a new car. After World War II, importers sold a semi-automatic conversion of the detachable magazine Schnellfeuer that was made for the US surplus market. The versions imported from China were built on new semi-auto-only frames; the ATF treats them under the law as new guns and not under the curio and relic exemption.

9 OBI

Oyster Bay Industries is an American antique firearms dealer that used to sell surplus weapons and ammunition from 1970 to 1978. It used to sell a detachable magazine conversion kit for the Mauser C.96. The kit removed the floor plate, spring and follower and added a small magazine catch mechanism that allowed it to feed its proprietary brand of fourteen-round 9 mm magazines. The conversion could either be performed on a "red 9" pistol or a new 9 mm upper receiver could be sold that would convert a standard C.96 7.63mm pistol.

PASAM machine pistol

The Brazilian government bought five-hundred 7.63mm M1932 Schnellfeuer machine pistols for the Policia Militar do Distrito Federal during the mid-1930s. The PASAM used the M1932 as its base but made a few alterations. The controls were the same as the standard model, except the markings were in Portuguese. The selector switch was marked N for normal and R for rápido. The safety control lever was marked S for seguro and F for fogo. It was used with Brazilian State Military Police forces in the 1980s. They preferred to use it as a semi-automatic carbine and reserved its full-auto setting for emergencies due to its recoil and muzzle-climb.
In 1970, the Policia Militar do Rio de Janeiro asked the services of Jener Damau Arroyo, a Spanish-born gunsmith, to make modifications on their PASAMs in order to improve their handling. The first modification, of which 101 were modified, received a metal frame extension welded to the magazine housing. It was fitted with a metal forward grip well ahead of the gun under the muzzle. The original grip was left alone, making it compatible with the wooden holster/stock. The second modification, involving 89 pistols, featured a similar frame extension, but the forward grip had wooden panels and was of different shape. The pistol grip frame used thicker rectangular wooden grips and had a "t-bar" metal shoulder stock welded to it. A metal frame attached to the receiver supported a rectangular wooden foregrip, taking pressure off the barrel. In both models, of course, the barrel was left free so as to enable it to do its short recoil during firing. For the record, 295 PASAMs were left in the original condition. It took standard detachable 10-round box magazines, although they can also take the extended 20- and 40-round magazines.

Notable copies

Chinese C.96 (7.63mm Mauser)

The most common and popular pistol in China since the beginning of the Republic in 1912, was the Mauser C96, called the "Box Cannon" in Chinese. It was imported from Germany and Spain, but mostly produced locally in various arsenals, the larger being in Hanyang, Shanghai, Gongxian, Shanxi. They were often used with a detachable shoulder stock. Hanyang alone produced around 13,000 copies.

Shanxi Type 17 (.45 ACP)

During the Warlord era of Chinese history in the early 20th century, the province of Shanxi was ruled by warlord Yen Hsi-shan, who had established a modern arms factory in his capital city of Taiyuan. Yen was equipping his troops with a locally produced copy of the Thompson submachine gun, chambered for the.45 ACP cartridge, but was experiencing supply difficulties as his troops' sidearms were 7.63mm calibre C96 handguns.
Yen's solution was to produce a.45 ACP caliber version of the C96, thus standardizing ammunition and making supply logistics easier. Designated Type 17, production of the.45 caliber handgun began in 1929 at the Taiyuan Arsenal and ended in 1931. They are inscribed "Type 17" on the left hand side of the gun, and "Republic Year Eighteen, Made in Shansi" on the right hand side. They were issued to railway guards in the province as defense against bandits and other warlords.
Besides being chambered for a larger cartridge, the Shanxi.45 pistols use a noticeably larger frame than their 7.63mm counterparts, with the 10-round magazine extending below the trigger guard and a 155 mm barrel. It was loaded using two five-round stripper clips rather than the single 10-round stripper clips of the standard 7.63mm Mauser. Because of the overall increase in size, Type 17 pistols share no interchangeable parts with any other C96 variant.
Most of the Shanxi.45 pistols were melted down after the Communist victory in the Chinese Civil War, largely due to their odd caliber for Chinese Communist standards, but a few examples were exported overseas for sale on the commercial market. Approximately 8,500 Shanxi.45 caliber Broomhandle pistols are believed to have been produced by the Taiyuan Arsenal, but there is some debate as to how many of the Shanxi.45 caliber Broomhandle pistols currently on the commercial market were actually produced for Yen's troops, and how many are more recent productions for the US collectors' market.

Type 80 (7.62mm Tokarev)

Type 80 is a machine pistol designed in the late 20th Century by the People's Republic of China. It is based on the C96 which was widely used in China since the 1900s and is chambered for the Type 51 cartridge, but it is fed by a 20-round detachable box magazine instead of the 10-round nondetachable magazine in a standard C96. A 10-round box magazine is also available for the firearm.
The Type 80 features a different grip similar to that on a TT-33 but seems narrower than that of a standard TT-33. The Type 80 is said to have an effective firing range of 100 metres and a muzzle velocity of 470 meters per second.
It was designed to replace some of the PLA's Type 54s, especially the Type 54s in service in the Chinese special forces, as a small, light weapon which was required to be good at both attacking and personal defending, similar to that of a PDW.
In the 1990s, the Chinese designed a new type of pistol, the QSZ-92, which was adopted as the standard-issue pistol by both the military and most of the police forces later and replaced most of the pistols in their service, including the Type 80.

Astra Model 900

The Spanish gunmaker Astra-Unceta y Cia began producing a copy of the Mauser C.96 in 1927 that was externally similar to the C96 but with non-interlocking internal parts. It was produced until 1941, with a production hiatus in 1937 and 1938, and a final batch assembled from spare parts in 1951. The Spanish copies of the C96 were generally intended for export to China, but after the commencement of the Sino-Japanese war the remaining Astra 900s were used in the Spanish Civil War, and numbers were also sold to Germany in the period 1940–1943.

ETAI / Royal MM31 (Model 1)

Produced by Beistegui Hermanos in Eibar, Spain, this was the first pseudo-Mauser on the market, a relatively crude semi-auto appearing in 1926 and full-auto variants appearing in 1927. Mechanically, it was laid out approximately like the Mauser original, but without the removable lock frame. Internal parts pivoted on pins and screws extending through the frame. The screws also held the frame together. The bolt was of round cross-section, unlike the square Mauser bolt. The weapon was stamped with either "Royal" or "ETAI".

Royal MM31 (Model 2)

This was a much closer copy of the Mauser original than the ETAI/Royal model and variants, with the full separate lock frame and all. It was of much better quality than the earlier gun, though still not at Mauser level. The MM31 was manufactured until 1934. A total of about 10,000 were made, in perhaps four successive variants. These models came in semi-auto and semi-auto/full auto selective fire variants.

Royal MM34

This model was much like the MM31, but added a mechanical rate reducer inside the grip area, a three-position lever to select the firing rate. It also had a ribbed barrel to help prevent the barrel from overheating during sustained full auto fire. Only a few hundred of these weapons were made and are very rare today.

Azul and Super Azul

The Azul and Super Azul pistols were also manufactured by Beistegui Hermanos in Eibar, Spain, but sold by Eulogio Arostegui. The Azul was a copy of the standard C96 while the Super Azul was a semi auto/full auto select fire variant. Each accepted detachable box magazines instead of having an internal box magazine.

Federal Ordnance M713 and M714

In the late 1980s to the early 1990s, the Federal Ordnance firearms company in South El Monte, California made reproductions of the Mauser 1917 Trench Carbine and C96 pistol, named the M713 and M714 respectively. The M713 came in a standard variant with a fixed stock and magazine, as well as a "Deluxe" variant which had a detachable stock and detachable box magazines. The M714 supported detachable box magazines, unlike the original C96, and a "Bolo" variant, with the "Bolo" model having a shorter barrel and grip. All variants of the M713 and M714 were available in 7.62x25mm and 9x19mm ammunition.

Users

The Broomhandle Mauser is a popular collector's gun. It was popularized in Soviet films as the iconic weapon of the Russian revolution and civil war. The C96 frequently appears as a "foreign" or "exotic" pistol in a number of films and TV shows, owing to its distinctive and instantly recognisable shape. Author Ian Fleming outfitted agents of SMERSH in the James Bond series with Mausers on the advice of firearms expert Geoffrey Boothroyd. The C96 was the inspiration for the Buck Rogers Atomic Pistol in the movie serial and the comic, and a popular toy version was produced in 1934 by the Daisy Manufacturing Company. A C96 was modified to form Han Solo's prop blaster pistol for the Star Wars films. Reproductions of the blaster became so popular in the cosplay community that gun collectors became aware that fans were buying and altering increasingly rare original Mausers to make blaster replicas.