Intermetallic


An intermetallic is a type of metallic alloy that forms an ordered solid-state compound between two or more metallic elements. Intermetallics are generally hard and brittle, with good high-temperature mechanical properties. They can be classified as stoichiometric or nonstoichiometic intermetallic compounds.
Although the term "intermetallic compounds", as it applies to solid phases, has been in use for many years, its introduction was regretted, for example by Hume-Rothery in 1955.

Definitions

Research definition

Schulze in 1967 defined intermetallic compounds as solid phases containing two or more metallic elements, with optionally one or more non-metallic elements, whose crystal structure differs from that of the other constituents. Under this definition, the following are included:
  1. Electron compounds
  2. Size packing phases. e.g. Laves phases, Frank–Kasper phases and Nowotny phases
  3. Zintl phases
The definition of a metal is taken to include:
  1. post-transition metals, i.e. aluminium, gallium, indium, thallium, tin, lead, and bismuth.
  2. metalloids, e.g. silicon, germanium, arsenic, antimony and tellurium.
Homogeneous and heterogeneous solid solutions of metals, and interstitial compounds, are excluded under this definition. However, interstitial intermetallic compounds are included, as are alloys of intermetallic compounds with a metal.

Common use

In common use, the research definition, including post-transition metals and metalloids, is extended to include compounds such as cementite, Fe3C. These compounds, sometimes termed interstitial compounds, can be stoichiometric, and share similar properties to the intermetallic compounds defined above.

Complexes

The term intermetallic is used to describe compounds involving two or more metals such as the cyclopentadienyl complex Cp6Ni2Zn4.

B2

A B2 intermetallic compound has equal numbers of atoms of two metals such as aluminium and iron.

Properties and applications

Intermetallic compounds are generally brittle at room temperature and have high melting points. Cleavage or intergranular fracture modes are typical of intermetallics due to limited independent slip systems required for plastic deformation. However, there are some examples of intermetallics with ductile fracture modes such as Nb–15Al–40Ti. Other intermetallics can exhibit improved ductility by alloying with other elements to increase grain boundary cohesion. Alloying of other materials such as boron to improve grain boundary cohesion can improve ductility in many intermetallics. They often offer a compromise between ceramic and metallic properties when hardness and/or resistance to high temperatures is important enough to sacrifice some toughness and ease of processing. They can also display desirable magnetic, superconducting and chemical properties, due to their strong internal order and mixed bonding, respectively. Intermetallics have given rise to various novel materials developments. Some examples include alnico and the hydrogen storage materials in nickel metal hydride batteries. Ni3Al, which is the hardening phase in the familiar nickel-base super alloys, and the various titanium aluminides have also attracted interest for turbine blade applications, while the latter is also used in very small quantities for grain refinement of titanium alloys. Silicides, inter-metallic involving silicon, are utilized as barrier and contact layers in microelectronics.
Intermetallic CompoundMelting Temperature
Density
Young's Modulus
FeAl1250-14005600263
Ti3Al16004200210
MoSi220206310430

Examples

  1. Magnetic materials e.g. alnico, sendust, Permendur, FeCo, Terfenol-D
  2. Superconductors e.g. A15 phases, niobium-tin
  3. Hydrogen storage e.g. AB5 compounds
  4. Shape memory alloys e.g. Cu-Al-Ni, Nitinol
  5. Coating materials e.g. NiAl
  6. High-temperature structural materials e.g. nickel aluminide, Ni3Al
  7. Dental amalgams, which are alloys of intermetallics Ag3Sn and Cu3Sn
  8. Gate contact/ barrier layer for microelectronics e.g. TiSi2
  9. Laves phases, e.g., MgCu2, MgZn2 and MgNi2.
The formation of intermetallics can cause problems. For example, intermetallics of gold and aluminium can be a significant cause of wire bond failures in semiconductor devices and other microelectronics devices. The management of intermetallics is a major issue in the reliability of solder joints between electronic components.

Intermetallic particles

s often form during solidification of metallic alloys, and can be used as a dispersion strengthening mechanism.

History

Examples of intermetallics through history include:
  1. Roman yellow brass, CuZn
  2. Chinese high tin bronze, Cu31Sn8
  3. Type metal, SbSn
German type metal is described as breaking like glass, not bending, softer than copper but more fusible than lead. The chemical formula does not agree with the one above; however, the properties match with an intermetallic compound or an alloy of one.