Data circuit-terminating equipment


A data circuit-terminating equipment is a device that sits between the data terminal equipment and a data transmission circuit. It is also called data communication equipment and data carrier equipment. Usually, the DTE device is the terminal, and the DCE is a modem.
In a data station, the DCE performs functions such as signal conversion, coding, and line clocking and may be a part of the DTE or intermediate equipment. Interfacing equipment may be required to couple the data terminal equipment into a transmission circuit or channel and from a transmission circuit or channel into the DTE.

Usage

Although the terms are most commonly used with RS-232, several data communication standards define different types of interfaces between a DCE and a DTE. The DCE is a device that communicates with a DTE device in these standards. Standards that use this nomenclature include:
A general rule is that DCE devices provide the clock signal and the DTE device synchronizes on the provided clock. D-sub connectors follow another rule for pin assignment. DTE devices usually transmit on pin connector number 2 and receive on pin connector number 3. DCE devices are just the opposite: pin connector number 2 receives and pin connector number 3 transmits the signals.
When two devices, that are both DTE or both DCE, must be connected together without a modem or a similar media translator between them, a crossover cable must be used, e.g. a null modem for RS-232 or an Ethernet crossover cable.