Communication channel


A communication channel refers either to a physical transmission medium such as a wire, or to a logical connection over a multiplexed medium such as a radio channel in telecommunications and computer networking. A channel is used to convey an information signal, for example a digital bit stream, from one or several senders to one or several receivers. A channel has a certain capacity for transmitting information, often measured by its bandwidth in Hz or its data rate in bits per second.
Communicating data from one location to another requires some form of pathway or medium. These pathways, called communication channels, use two types of media: cable and broadcast. Cable or wire line media use physical wires of cables to transmit data and information. Twisted-pair wire and coaxial cables are made of copper, and fiber-optic cable is made of glass.
In information theory, a channel refers to a theoretical channel model with certain error characteristics. In this more general view, a storage device is also a kind of channel, which can be sent to and received from.

Examples

Examples of communications channels include:
  1. A connection between initiating and terminating nodes of a circuit.
  2. A single path provided by a transmission medium via either
  3. * physical separation, such as by multipair cable or
  4. * electrical separation, such as by frequency-division or time-division multiplexing.
  5. A path for conveying electrical or electromagnetic signals, usually distinguished from other parallel paths.
  6. * A storage which can communicate a message over time as well as space
  7. * The portion of a storage medium, such as a track or band, that is accessible to a given reading or writing station or head.
  8. * A buffer from which messages can be 'put' and 'got'. See Actor model and process calculi for discussion on the use of channels.
  9. In a communications system, the physical or logical link that connects a data source to a data sink.
  10. A specific radio frequency, pair or band of frequencies, usually named with a letter, number, or codeword, and often allocated by international agreement.
Examples:
  1. * Marine VHF radio uses some 88 channels in the VHF band for two-way FM voice communication. Channel 16, for example, is 156.800 MHz. In the US, seven additional channels, WX1 - WX7, are allocated for weather broadcasts.
  2. * Television channels such as North American TV Channel 2 = 55.25 MHz, Channel 13 = 211.25 MHz. Each channel is 6 MHz wide. This was based on the bandwidth required by older analog television signals. Since 2006 television broadcasting has switched to digital modulation which uses image compression to transmit a television signal in a much smaller bandwidth, so each of these "physical channels" has been divided into multiple "virtual channels" each carrying a DTV channel.
  3. * Wi-Fi uses 13 channels from 2412 MHz to 2484 MHz in 5 MHz steps, in the ISM bands.
  4. * The radio channel between an amateur radio repeater and a ham uses two frequencies often 600 kHz apart. For example, a repeater that transmits on 146.94 MHz typically listens for a ham transmitting on 146.34 MHz.
All of these communications channels share the property that they transfer information. The information is carried through the channel by a signal.

Channel models

A channel can be modelled physically by trying to calculate the physical processes which modify the transmitted signal. For example, in wireless communications the channel can be modelled by calculating the reflection off every object in the environment. A sequence of random numbers might also be added in to simulate external interference and/or electronic noise in the receiver.
Statistically a communication channel is usually modelled as a triple consisting of an input alphabet, an output alphabet, and for each pair of input and output elements a transition probability p. Semantically, the transition probability is the probability that the symbol o is received given that i was transmitted over the channel.
Statistical and physical modelling can be combined. For example, in wireless communications the channel is often modelled by a random attenuation of the transmitted signal, followed by additive noise. The attenuation term is a simplification of the underlying physical processes and captures the change in signal power over the course of the transmission. The noise in the model captures external interference and/or electronic noise in the receiver. If the attenuation term is complex it also describes the relative time a signal takes to get through the channel. The statistics of the random attenuation are decided by previous measurements or physical simulations.
Channel models may be continuous channel models in that there is no limit to how precisely their values may be defined.
Communication channels are also studied in a discrete-alphabet setting. This corresponds to abstracting a real world communication system in which the analog → digital and digital → analog blocks are out of the control of the designer. The mathematical model consists of a transition probability that specifies an output distribution for each possible sequence of channel inputs. In information theory, it is common to start with memoryless channels in which the output probability distribution only depends on the current channel input.
A channel model may either be digital or analog.

Digital channel models

In a digital channel model, the transmitted message is modelled as a digital signal at a certain protocol layer. Underlying protocol layers, such as the physical layer transmission technique, is replaced by a simplified model. The model may reflect channel performance measures such as bit rate, bit errors, latency/delay, delay jitter, etc. Examples of digital channel models are:
In an analog channel model, the transmitted message is modelled as an analog signal. The model can be a linear or non-linear, time-continuous or time-discrete, memoryless or dynamic, time-invariant or time-variant, baseband, passband, real-valued or complex-valued signal model. The model may reflect the following channel impairments:
These are examples of commonly used channel capacity and performance measures:
In networks, as opposed to point-to-point communication, the communication media is shared between multiple nodes. Depending on the type of communication, different terminals can cooperate or interfere on each other. In general, any complex multi-terminal network can be considered as a combination of simplified multi-terminal channels. The following channels are the principal multi-terminal channels which was first introduced in the field of information theory:
From the above 4 basic multi-terminal channels, multiple access channel is the only one whose capacity region is known. Even for the special case of the Gaussian scenario, the capacity region of the other 3 channels except the broadcast channel is unknown in general.