CS 36 Merlin


The CS 36 Merlin is a Canadian sailboat, that was designed by Tony Castro and first built in 1986. The design is out of production.

Production

The boat was built by CS Yachts in Canada, who completed 100 examples between 1986 and 1990.
The CS 36 Merlin was produced for almost a year side-by-side with the CS 36, which then became known as the CS 36 Traditional. After the production overlap the Merlin replaced the CS 36 in company's line.
About 20 of the 100 Merlins built were supplied to charter operators for their fleets.

Design

The CS 36 Merlin is a small recreational keelboat, built predominantly of vacuum-bagged fiberglass or Kevlar with a balsa wood core above the waterline. It has a masthead sloop rig, an internally-mounted spade-type rudder and a fixed fin keel. It displaces and carries of ballast.
The boat has a draft of with the standard keel and with the optional wing keel.
The boat is fitted with a Swedish Volvo Penta diesel engine of as standard equipment. The fuel tank holds and the fresh water tank has a capacity of.
The boat was available with a long list of options, including a Kevlar or fibreglass hull, a swim platform or conventional transom; a, diesel engine or a turbocharged engine, a tall mast or regular mast and by the time production ended in 1990 there were four keel configurations: shoal, wing, deep and performance bulb. As a result of the long options list, no two boats outside the charter fleets were built in the same configuration.
The boat has a PHRF racing average handicap of 141 with a high of 141 and low of 141. It has a hull speed of.