CHAdeMO


CHAdeMO is the trade name of a quick charging method for battery electric vehicles delivering up to 62.5 kW by 500V, 125A direct current via a special electrical connector.
A revised CHAdeMO 2.0 specification allows for up to 400 kW by 1000V, 400A direct current.
It was proposed in 2010 as a global industry standard by an association of the same name formed by five major Japanese automakers and included in the IEC61851-23, -24 and the IEC 62196 standard as configuration AA. Competing standards include the Combined Charging System —used by most German and US automakers—and the Tesla Supercharger.
CHAdeMO is an abbreviation of "CHArge de MOve", equivalent to "move using charge" or "move by charge" or "charge 'n' go", a reference to the fact that it's a fast charger. The name is derived from the Japanese phrase O cha demo ikaga desuka, translating to English as "How about a cup of tea?", referring to the time it would take to charge a car. CHAdeMO can charge low-range electric cars in less than half an hour., CHAdeMO allows up to 400 kW of charging and aims for 900 kW as it is currently co-developing with China Electricity Council the next-generation ultra-high-power charging standard with the working name of “ChaoJi.”

History

The CHAdeMO Association was formed by the Tokyo Electric Power Company, Nissan, Mitsubishi and Fuji Heavy Industries. Toyota later joined as its fifth executive member, followed by Hitachi, Honda and Panasonic. CHAdeMO Research and Development started in 2005 with the goal of developing a public infrastructure of fast chargers that enables people to drive EVs without worrying about the range of their battery. The first commercial CHAdeMO charging infrastructure was commissioned in 2009 and CHAdeMO was published as IEC standards in 2014. In the same year, CHAdeMO was published as EN standard, followed by the publication as IEEE Standard 2030.1.1TM-2015 in 2016.
In Europe, the European Commission has submitted in 2013 designating the Combo2 as the European mandated plug for DC high-power charging. While the European Parliament adopted a draft report supporting CHAdeMO to be "transitioned out by January 2019," at the final stage of law-making this was rejected and the simply mandates all publicly accessible chargers in the EU to be equipped "at least" with Combo2 connectors, endorsing explicitly multistandard charging in Recital 33. There is no conflict with European Directive 2014/94/EU regarding barriers. Charging stations with several charging interfaces are explicitly permitted.
By December 2015, the CHAdeMO network had reached 10,000 charge points worldwide in 50 countries: 5,974 in Asia, 2,755 in Europe, and just 1,400 in North America.
By July 2017, the CHAdeMO Association web site stated that the number had grown to over 16,000 CHAdeMO chargers installed globally, still mostly located in Japan. Europe had over 4,600, North America had more than 2,200 and 2,000 were located elsewhere.
In 2018 the total number of the charge points in Europe surpassed that of Japan. As of April 2019, there were roughly 25,300 CHAdeMO charge points globally, with the biggest share, 9,200, in Europe, 7,600 in Japan, 3,200 in North America and more than 5,300 elsewhere.
In July 2020, Nissan unveiled the new 2021 Nissan Ariya to the US market, and it will have only a CCS charge port rather than the CHAdeMO port that had been on the Nissan Leaf the previous ten years. Auto analysts noted that, with this decision to abandon CHAdeMO charging, it is the "death knell" for CHAdeMO in the US and Europe, as it will leave only the Mitsubishi Outlander plug-in hybrid as the one new car in the US using CHAdeMO. "The plug wars are over. CCS won. We're going to see some consolidation."

DC fast charging

Most electric vehicles have an on-board charger that uses a rectifier circuit to transform alternating current from the electrical grid to direct current suitable for recharging the EV's battery pack. Cost and thermal issues limit how much power the rectifier can handle, so beyond around 240 V AC and 75 A it is better for an external charging station to deliver DC to the battery. Given these limits, most conventional charging designs are based on 240V, 30A in the United States and Japan, 240 V, 40 A in Canada and 230 V, 15 A or 3Φ, 400 V, 32 A in Europe and Australia. AC chargers with higher limits have been specified, for example SAE J1772-2009 has an option for 240 V, 80 A and VDE-AR-E 2623-2-2 has 3Φ, 400 V, 63 A. But these charger types have been rarely deployed in the US and only EVs made by Tesla have a matching rectifier.
For faster charging, dedicated chargers can be built in permanent locations and provided with high-current connections to the grid. In this style of connection, the charger's DC output has no effective limit, theoretical or practical. Such high voltage and high-current charging is called a DC fast charge or DC quick charging.
CHAdeMO originated out of Tokyo Electric Power Co.'s charging system design. TEPCO had trialled numerous EV infrastructure projects between 2006 and 2009 in collaboration with Nissan, Mitsubishi and Subaru. These trials resulted in developing patented technology and a specification for high-voltage high-current automotive fast charging via a DC fast-charge connector, which is the basis for the CHAdeMO protocol. The connector was specified by the 1993 Japan Electric Vehicle Standard G105-1993 from the JARI.
. An SAE J1772 socket is also shown on the right.
In addition to carrying power, the connector also makes a data connection using the CAN bus protocol. This performs functions such as a safety interlock to avoid energizing the connector before it is safe, transmitting battery parameters to the charging station including when to stop charging, target voltage, and total battery capacity, and while charging how the station should vary its output current.

Vehicle-to-grid integration (VGI) or Vehicle-to-Grid">Vehicle-to-grid">Vehicle-to-Grid (V2G)

CHAdeMO has published its V2X protocol in 2014 and as of August 2019, CHAdeMO remains the only standardised charging protocol that defines V2X and has mass-produced cars and chargers readily capable of it. V2G technology enables EV owners to use the car as an energy storage and to save costs by optimising energy usage and providing services to the Grid. Since 2012, multiple V2X demo projects using V2X capacities of CHAdeMO protocol have been going on around the world. Some of the recent projects include UCSD INVENT in the United States, as well as Sciurus and e4Future in the United Kingdom that are supported by Innovate UK.

High-power charging

CHAdeMO has published its protocol for 400 kW ‘ultra-fast’ charging in May 2018. This CHAdeMO 2.0, delivering a 400 kW output, allowed the standard to better compete with the CCS “ultra-fast” stations being built around the world as part of new networks such as IONITY charging consortium.
In August 2018, CHAdeMO Association has announced co-development of the next-generation ultra-high-power plug with CEC, with which CHAdeMO will harmonise. This project with the code name ChaoJi aims to enable 900 kW, all the while ensuring backward compatibility with the current CHAdeMO and GB/T chargers, according to the Association. It was revealed that ChaoJi can also be made backward compatible with CCS and such study is under consideration as of summer 2019.
In the meantime, high-power CHAdeMO charging technology is also advancing. High-power CHAdeMO stations are being constructed in North America as well as in Europe since 2018. In July 2019, UL has issued a certification to UL 2251 to accommodate CHAdeMO's "boost mode" high-power charging using a non-cooled cable assembly.

Deployment

In charging stations

CHAdeMO-type fast charging stations have initially been installed in great numbers by the utility TEPCO in Japan, which required the creation of an additional power distribution network to supply these stations. Since then, CHAdeMO charger installation has expanded its geographical reach and in April 2019, the CHAdeMO Association stated that there were 25,300 CHAdeMO chargers installed in 71 countries. These included 7,600 charging stations in Japan, 9,200 in Europe, 3,200 in North America, and 5,310 elsewhere.

West Coast Electric Highway

The West Coast Electric Highway is an extensive network of electric vehicle DC fast charging stations located every 25 to 50 miles along Interstate 5 and other major roadways in the Pacific Northwest of the United States.
The build out of the WCEH began in 2010 with the deployment of CHAdeMO and level 2 charging stations. As of 2014, a network with thousands of level 2 charging pedestals and dozens of DC fast chargers including both Combined Charging System and CHAdeMO.

Manufacturers

As of July 2019, a total of .
In the early times, in the United States, Aker Wade Power Technologies has entered into a licensing agreement with TEPCO to manufacture and market DC fast chargers for electric vehicles. Eaton Corporation has demonstrated a CHAdeMO-compatible DC quick charger recharging Mitsubishi iMiEV cars. ECOtality has deployed the Blink DC Fast Charger, which is outfitted with two CHAdeMO-compliant electric vehicle charging connectors, in the Blink Network. AeroVironment offers a broad line of DC fast chargers including two CHAdeMO certified Quick Charger models. Princeton Power Systems' UL-certified bi-directional CHAdeMO charger fast-charger is capable of charging and discharging from the Nissan LEAF, for both grid-tied and backup-power modes. The fast-chargers are available in 10 kW, 15 kW, and 30 kW sizes.
Fuji Electric Corporation of America announced a 25 kW CHAdeMO quick charger integrated with Coulomb Technologies' ChargePoint Network. manufactures 50 kW and 20 kW CHAdeMO models with UL certification for the Americas markets.
Andromeda Power has a mobile DC CHAdeMO 50 kW charger.
In Europe, Evtronic, Schneider-Electric, SGTE Power, CIRCONTROL, , formerly Epyon, and were the first European companies get CHAdeMO certification and make fast chargers equipped with the latest CHAdeMO communication protocol.
Polar Power Inc. has developed mobile electric generators for charging electric cars.
In Canada, and design and manufacture fast-charging stations that support both CHAdeMO and SAE.

In vehicles

The CHAdeMO quick charge option was promoted by Nissan-Renault and it has found acceptance with Japanese car manufacturers to allow their electric cars to benefit from the CHAdeMO charger network in Japan. With over 20 OEMs, in 2018 CHAdeMO chargers continued to serve the biggest share of the fast-chargeable pure battery electric vehicles in the world. Models supporting CHAdeMO charging include:
Quick Charge Power of San Diego plans to offer CHAdeMO retrofits for the second generation Toyota RAV4 EV and the Mercedes B-Class starting in 2015.

Gallery