Address space layout randomization
Address space layout randomization is a computer security technique involved in preventing exploitation of memory corruption vulnerabilities. In order to prevent an attacker from reliably jumping to, for example, a particular exploited function in memory, ASLR randomly arranges the address space positions of key data areas of a process, including the base of the executable and the positions of the stack, heap and libraries.
History
The Linux PaX project first coined the term "ASLR", and published the first design and implementation of ASLR in July 2001 as a patch for the [|Linux kernel]. It is seen as a complete implementation, providing also a patch for kernel stack randomization since October 2002.The first mainstream operating system to support ASLR by default was the [|OpenBSD] version 3.4 in 2003, followed by Linux in 2005.
Benefits
Address space randomization hinders some types of security attacks by making it more difficult for an attacker to predict target addresses. For example, attackers trying to execute return-to-libc attacks must locate the code to be executed, while other attackers trying to execute shellcode injected on the stack have to find the stack first. In both cases, the system obscures related memory-addresses from the attackers. These values have to be guessed, and a mistaken guess is not usually recoverable due to the application crashing.Effectiveness
Address space layout randomization is based upon the low chance of an attacker guessing the locations of randomly placed areas. Security is increased by increasing the search space. Thus, address space randomization is more effective when more entropy is present in the random offsets. Entropy is increased by either raising the amount of virtual memory area space over which the randomization occurs or reducing the period over which the randomization occurs. The period is typically implemented as small as possible, so most systems must increase VMA space randomization.To defeat the randomization, attackers must successfully guess the positions of all areas they wish to attack. For data areas such as stack and heap, where custom code or useful data can be loaded, more than one state can be attacked by using NOP slides for code or repeated copies of data. This allows an attack to succeed if the area is randomized to one of a handful of values. In contrast, code areas such as library base and main executable need to be discovered exactly. Often these areas are mixed, for example stack frames are injected onto the stack and a library is returned into.
The following variables can be declared:
To calculate the probability of an attacker succeeding, we have to assume a number of attempts carried out without being interrupted by a signature-based IPS, law enforcement, or other factor; in the case of brute forcing, the daemon cannot be restarted. We also have to figure out how many bits are relevant and how many are being attacked in each attempt, leaving however many bits the attacker has to defeat.
The following formulas represent the probability of success for a given set of attempts on bits of entropy.
In many systems, can be in the thousands or millions; on 64-bit systems, these numbers typically reach the millions at least, Hector Marco-Gisbert and Ismael Ripoll showed in 2014 how to bypass the ASLR in 64-bit systems in less than one second under certain circumstances. For 32-bit systems at 2004 computer speeds which have 16 bits for address randomization, Shacham and co-workers state "... 16 bits of address randomization can be defeated by a brute force attack within minutes." The authors' statement depends on the ability to attack the same application multiple times without any delay. Proper implementations of ASLR, like that included in grsecurity, provide several methods to make such brute force attacks infeasible. One method involves preventing an executable from executing for a configurable amount of time if it has crashed a certain number of times.
Android, and possibly other systems, implement Library Load Order Randomization, a form of ASLR which randomizes the order in which libraries are loaded. This supplies very little entropy. An approximation of the number of bits of entropy supplied per needed library appears below; this does not yet account for varied library sizes, so the actual entropy gained is really somewhat higher. Note that attackers usually need only one library; the math is more complex with multiple libraries, and shown below as well. Note that the case of an attacker using only one library is a simplification of the more complex formula for.
These values tend to be low even for large values of, most importantly since attackers typically can use only the C standard library and thus one can often assume that. However, even for a small number of libraries there are a few bits of entropy gained here; it is thus potentially interesting to combine library load order randomization with VMA address randomization to gain a few extra bits of entropy. Note that these extra bits of entropy will not apply to other mmap segments, only libraries.
Reducing entropy
Attackers may make use of several methods to reduce the entropy present in a randomized address space, ranging from simple information leaks to attacking multiple bits of entropy per attack. There is little that can be done about this.It is possible to leak information about memory layout using format string vulnerabilities. Format string functions such as printf use a variable argument list to do their job; format specifiers describe what the argument list looks like. Because of the way arguments are typically passed, each format specifier moves closer to the top of the stack frame. Eventually, the return pointer and stack frame pointer can be extracted, revealing the address of a vulnerable library and the address of a known stack frame; this can completely eliminate library and stack randomization as an obstacle to an attacker.
One can also decrease entropy in the stack or heap. The stack typically must be aligned to 16 bytes, and so this is the smallest possible randomization interval; while the heap must be page-aligned, typically 4096 bytes. When attempting an attack, it is possible to align duplicate attacks with these intervals; a NOP slide may be used with shellcode injection, and the string can be replaced with for an arbitrary number of slashes when attempting to return to system. The number of bits removed is exactly for intervals attacked.
Such decreases are limited due to the amount of data in the stack or heap. The stack, for example, is typically limited to and grows to much less; this allows for at most, although a more conservative estimate would be around 8– corresponding to 4– of stack stuffing. The heap on the other hand is limited by the behavior of the memory allocator; in the case of glibc, allocations above 128 KB are created using mmap, limiting attackers to 5 bits of reduction. This is also a limiting factor when brute forcing; although the number of attacks to perform can be reduced, the size of the attacks is increased enough that the behavior could in some circumstances become apparent to intrusion detection systems.
Limitations
ASLR-protected addresses can be leaked by various side channels, removing mitigation utility. Recent attacks have used information leaked by the CPU branch target predictor buffer or memory management unit walking page tables. It is not clear if this class of ASLR attack can be mitigated. If they cannot, the benefit of ASLR is reduced or eliminated.Implementations
Several mainstream, general-purpose operating systems implement ASLR.Android
4.0 Ice Cream Sandwich provides address space layout randomization to help protect system and third party applications from exploits due to memory-management issues. Position-independent executable support was added in Android 4.1. Android 5.0 dropped non-PIE support and requires all dynamically linked binaries to be position independent. Library load ordering randomization was accepted into the Android open-source project on 26 October 2015, and was included in the Android 7.0 release.DragonFly BSD
has an implementation of ASLR based upon OpenBSD's model, added in 2010. It is off by default, and can be enabled by setting the sysctl vm.randomize_mmap to 1.FreeBSD
Support for ASLR will appear in FreeBSD 13.0. It is disabled by default.iOS (iPhone, iPod touch, iPad)
introduced ASLR in iOS 4.3.KASLR was introduced in iOS 6. The randomized kernel base is 0x01000000 +, where 0xRR is a random byte from SHA1 generated by iBoot.
Linux
enabled a weak form of ASLR by default since the kernel version 2.6.12, released in June 2005. The PaX and Exec Shield patchsets to the Linux kernel provide more complete implementations. The Exec Shield patch for Linux supplies 19 bits of stack entropy on a period of 16 bytes, and 8 bits of mmap base randomization on a period of 1 page of 4096 bytes. This places the stack base in an area 8 MB wide containing 524,288 possible positions, and the mmap base in an area 1 MB wide containing 256 possible positions.Position-independent executable implements a random base address for the main executable binary and has been in place since 2003. It provides the same address randomness to the main executable as being used for the shared libraries. The PIE feature is in use only for the network facing daemons – the PIE feature cannot be used together with the prelink feature for the same executable. The prelink tool implements randomization at prelink time rather than runtime, because by design prelink aims to handle relocating libraries before the dynamic linker has to, which allows the relocation to occur once for many runs of the program. As a result, real address space randomization would defeat the purpose of prelinking.
The randomization can be disabled for a specific process by changing its execution domain, using personality.
Kernel address space layout randomization, bringing support for address space randomization to running Linux kernel images by randomizing where the kernel code is placed at boot time, was merged into the Linux kernel mainline in kernel version 3.14, released on 30 March 2014. When compiled in, it can be disabled at boot time by specifying as one of the kernel's boot parameters.
There are several side-channel attacks in x86 processors that could leak kernel addresses. In late 2017, kernel page-table isolation was developed to defeat these attacks. However, this method cannot protect against side-channel attacks utilizing collisions in branch predictor structures.
Microsoft Windows
Microsoft's Windows Vista and later have ASLR enabled only for executables and dynamic link libraries that are specifically linked to be ASLR-enabled. For compatibility, it is not enabled by default for other applications. Typically, only older software is incompatible and ASLR can be fully enabled by editing a registry entry "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\MoveImages", or by installing Microsoft's Enhanced Mitigation Experience Toolkit.The locations of the heap, stack, Process Environment Block, and Thread Environment Block are also randomized. A security whitepaper from Symantec noted that ASLR in 32-bit Windows Vista may not be as robust as expected, and Microsoft has acknowledged a weakness in its implementation.
Host-based intrusion prevention systems such as WehnTrust and Ozone also offer ASLR for Windows XP and Windows Server 2003 operating systems. WehnTrust is open-source. Complete details of Ozone's implementation are not available.
It was noted in February 2012 that ASLR on 32-bit Windows systems prior to Windows 8 can have its effectiveness reduced in low memory situations. Similar effect also had been achieved on Linux in the same research. The test code caused the Mac OS X 10.7.3 system to kernel panic, so it was left unclear about its ASLR behavior in this scenario.
NetBSD
Support for ASLR in userland appeared in NetBSD 5.0, and was enabled by default in NetBSD-current in April 2016.Kernel ASLR support on amd64 was added in NetBSD-current in October 2017, making NetBSD the first BSD system to support KASLR.
OpenBSD
In 2003, OpenBSD became the first mainstream operating system to support a strong form of ASLR and to activate it by default.OpenBSD completed its ASLR support in 2008 when it added support for PIE binaries. OpenBSD 4.4's malloc was designed to improve security by taking advantage of ASLR and gap page features implemented as part of OpenBSD's
mmap system call, and to detect use-after-free bugs. Released in 2013, OpenBSD 5.3 was the first mainstream operating system to enable Position-independent executables by default on multiple hardware platforms, and OpenBSD 5.7 activated position-independent static binaries by default.macOS
In Mac OS X Leopard 10.5, Apple introduced randomization for system libraries.In Mac OS X Lion 10.7, Apple expanded their implementation to cover all applications, stating "address space layout randomization has been improved for all applications. It is now available for 32-bit apps, making 64-bit and 32-bit applications more resistant to attack."
As of OS X Mountain Lion 10.8 and later, the entire system including the kernel as well as kexts and zones are randomly relocated during system boot.