2-8-2


Under the Whyte notation for the classification of steam locomotives, represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles and two trailing wheels on one axle, usually in a trailing truck. This configuration of steam locomotive is most often referred to as a Mikado, frequently shortened to Mike.
At times it was also referred to on some railroads in the United States of America as the McAdoo Mikado and, during the Second World War, the MacArthur.
The notation 2-8-2T indicates a tank locomotive of this wheel arrangement, the "T" suffix indicating a locomotive on which the water is carried in side-tanks mounted on the engine rather than in an attached tender.

Overview

The 2-8-2 wheel arrangement allowed the locomotive's firebox to be placed behind instead of above the driving wheels, thereby allowing a larger firebox that could be both wide and deep. This supported a greater rate of combustion and thus a greater capacity for steam generation, allowing for more power at higher speeds. Allied with the larger driving wheel diameter which was possible when they did not impinge on the firebox, it meant that the 2-8-2 was capable of higher speeds than a with a heavy train. These locomotives did not suffer from the imbalance of reciprocating parts as much as did the 2-6-2 or the, because the center of gravity was between the second and third drivers instead of above the centre driver.
The first 2-8-2 locomotive was built in 1884. It was originally named Calumet by Angus Sinclair, in reference to the engines built for the Chicago & Calumet Terminal Railway. However, this name did not take hold.
The wheel arrangement name "Mikado" originated from a group of :ja:国鉄9700形蒸気機関車|Japanese type 9700 2-8-2 locomotives that were built by Baldwin Locomotive Works for the gauge Nippon Railway of Japan in 1897. In the 19th century, the Emperor of Japan was often referred to as "the Mikado" in English. Also, the Gilbert and Sullivan opera The Mikado had premiered in 1885 and achieved great popularity in both Britain and America.
The 2-8-2 was one of the more common configurations in the first half of the 20th century, before dieselisation. Between 1917 and 1944, nearly 2,200 of this type were constructed by the American Locomotive Company, Lima Locomotive Works and Baldwin, based on designs by the United States Railroad Administration. It was also known as the "McAdoo Mikado" in the United States, after William Gibbs McAdoo who was appointed as Director General of Railroads when the United States commenced hostilities during the latter part of the First World War and the USRA was established. Of all of the USRA designs, the Mikado proved to be the most popular. The total American production was about 14,000, of which 9,500 were for local customers and the rest exported.
"Mikado" remained the type name until the attack on Pearl Harbor in 1941. Seeking a more American name, "MacArthur" came into use to describe the locomotive type in the United States, after General Douglas MacArthur. After the war, the type name "Mikado" again became the most common for this locomotive type.

Usage

Locomotives of this wheel arrangement saw service on all six populated continents. The 2-8-2 type was particularly popular in North America, but was also used extensively in Continental Europe and elsewhere.

Argentina

broad gauge

The Buenos Aires and Pacific Railway bought eighteen 2-8-2T locomotives in three batches of six as their class 701 class. The first two batches came from North British Locomotive Company in 1908 and 1912, the third from Henschel & Sohn in 1913.
The BA&P also bought eight 2-8-2 tender locomotives from Beyer, Peacock and Company in 1928 as their 3001 class.
The Central Argentine Railway bought fifteen 2-8-2T locomotives as their class C7 in 1912; they were built by Robert Stephenson and Company with works numbers 3506 to 3520.
The FCCA also bought sixty 2-8-2 locomotives: twenty class CS8A from Beyer, Peacock and Company in 1926, and another twenty in 1928 from Robert Stephenson and Company. The final twenty to class class CS9A were supplied by Vulcan Foundry in 1930. Both classes were cross-compound locomotives with one high-pressure cylinder with a bore of and one low-pressure cylinder with a bore of, with a stroke of. The earlier class had coupled wheels with a diameter of, whereas on the later class they were .

Standard gauge

The East Argentine Railway bought four 2-8-2 locomotives from Baldwin Locomotive Works in 1924. As class X they were numbered 70 to 74; they became General Urquiza Railway 701 to 704 in the 1948 nationalisation. Baldwin had classified them as 12-30--E.

gauge

The Province of Buenos Aires Railway bought a single 2-8-2 locomotive from Hanomag of Germany in 1910. Numbered 251 and classified as class E, it was the only 2-8-2 on that railway's system.
The Central Northern Railway bought seven classes of 2-8-2 locomotives totalling 134 locomotives. The first 100 were all bought in 1911: Fifteen from Borsig, 25 from Henschel & Sohn, 10 from Hanomag and 50 from North British Locomotive.. The next 25 came from Baldwin Locomotive Works in 1920; they were Baldwin class 12-30--E, 55 to 79, FCCN class C11, numbered 7000–7024. The last nine new locomotives were built by Henschel between 1928 and 1930.. In addition the FCCN rebuilt 20 4-8-0 locomotives of classes C6 and C7 into 2-8-2s between 1938 and 1940.
The Córdoba Central Railway bought 31 locomotives in four classes. The first was a solitary locomotive, numbered 800, class C6A built by Alco's Brooks Works in 1910. It was nearly a decade before they bought any more with a dozen class C9A locomotives, numbered 1451 to 1462, coming from Montreal Locomotive Works, half in 1919 and half in 1920.. MLW delivered another 15 Mikados later that same year; as class C10A they were numbered 1463 to 1477.. FCCC's final three came from Baldwin Locomotive Works in 1925, they were Baldwin class 12-26--E; FCCC numbered them 1501 to 1503, class C11A. When the FCCC was taken over by the FCCN in 1939, their new owner changed the classification by adding 20 to the FCCC's old classification; the locomotives kept their old numbers, except for FCCC 800 which became FCCN 1400.

gauge

On the Ferrocarriles Patagónicos, 75 locomotives were bought in 1922. Fifty were built by Henschel & Sohn, numbered 101 to 150 and class 75H; 25 were built by Baldwin, numbered 1 to 25, class 75B with Baldwin classifying then as 12-18--E.

Australia

Possibly the world's first 2-8-2T was the South Maitland Railways 10 Class, first delivered in 1911, by Beyer-Peacock, and spasmodically continuing delivery until 1925, then totaling 14 in the class.
The requirement for locomotives that could be converted from to without major re-engineering led to the introduction of Mikado locomotives by the Victorian Railways in the 1920s. Whereas previous 2-8-0 Consolidation type locomotives featured long, narrow fireboxes between the frames that made gauge conversion impractical, the N class light lines and X class heavy goods locomotives both featured wide fireboxes positioned behind the coupled wheels and above the frames.
The South Australian Railways employed four distinct classes of 2-8-2 locomotive, the locally designed 700 and 710 class, the 740 class that was originally built for China by Clyde Engineering and purchased by the SAR after the order was cancelled in the wake of the Chinese Communist Revolution, and the 750 class, a group of ten surplus VR N class locomotives.
To assist with the postwar rebuilding of Australian railways, American-designed Mikado locomotives were also introduced after the Second World War, such as the Baldwin-built New South Wales Government Railways D59 class and the Queensland Rail AC16 class.
A Mikado was also the last new class of mainline steam locomotive to be introduced in Australia, the V class heavy freight locomotive of the Western Australian Government Railways of 1955.

Austria

The 4-cylinder compound class 470, developed in 1914 by Karl Gölsdorf, was built for express trains on mountain lines. From 1927, some of these locomotives were rebuilt to two-cylinder superheated steam locomotives and designated class 670. They were reclassified to class 39 from 1938 and remained in service until 1957.

Belgian Congo

In 1917, 24 Mikado type steam locomotives were built for the Chemins de Fer du Bas Congo á Katanga, a new line from the Northern Rhodesian border to Port Francqui in the Belgian Congo. Since the line was just being completed at the time, the full complement of locomotives were not required immediately and four, possibly six, of them were temporarily leased to the South African Railways to alleviate a wartime shortage of locomotives. In South Africa, they were known as the Katanga Mikado. Six more of these engines were leased to the Beira and Mashonaland and Rhodesia Railways, which operated between Umtali in Southern Rhodesia and Beira in Mozambique. The locomotives were all forwarded to the Belgian Congo after the war, where they were numbered in the BCK range from 201 to 224.

Canada

The Canadian National Railway operated a few Mikado locomotives:
The Canadian Pacific used Mikado locomotives for passenger and freight trains throughout Canada. Most worked in the Rocky Mountains, where the standard 4-6-2 Pacifics and 4-6-4 Hudsons could not provide enough traction to handle the steep mountain grades.
The Temiskaming & Northern Ontario operated seventeen Mikados, all ordered from Canadian Locomotive Company in three batches, the first six in 1916, second batch of four in 1921, and the final seven in 1923 to 1925. They were scrapped between 1955 and 1957 when the Ontario Northland was completely dieselized, except for three wrecked and scrapped in the 1940s. The Temiskaming & Northern Ontario operated its Mikados on both freight and passenger service, and were fitted with smoke deflectors. In 1946 65 out of 199 Canadian Pacific N2 2-8-0’s we’re rebuilt and converted to Class P1n 2-8-2’s. However all were scrapped around 1955 and 1958. No P1n 2-8-2’s were preserved however CP no. 5468 is preserved
CP's no. 5468, on display in Revelstoke, British Columbia. And CP’s 5361 a Class P2e is preserved Depew New York.

China

Some local industries still actively use Mikados on freight service. The last regular Mikado passenger service was ended on 20 November 2015 in Baiyin. A few Chinese-made locomotives have found their way into the United States, including Class SY no. 3025, built in 1989, which operated as New Haven no. 3025, in honor of Class J1 no. 3001-3024, on the Valley Railroad in Connecticut. The locomotive now operates on the Belvidere & Delaware as no. 142. It is original to the New York, Susquehanna & Western as no. 142. It and two other Chinese 2-8-2s are currently in the United States.

Finland

Finland's sixteen gauge Class Pr1 were 2-8-2T passenger locomotives for use on local trains. They were nicknamed Paikku, which means local. The Class Pr1 was operational from 1924 to 1972. Numbered 761 to 776, they were built by Hannoversche Maschinenbau AG in Germany and also by Finnish locomotive builders Tampella and Lokomo. The last one, no. 776, is preserved at the Finnish Railway Museum.
The Finnish Class Tr1 tender locomotive was built by Tampella, Lokomo and German locomotive builders Arnold Jung from 1940 and remained in service until 1975. They were numbered from 1030 to 1096 and were nicknamed Risto, after Finnish President Risto Ryti. 1030, 1033, 1037, 1047, 1051, 1055, 1057, 1060, 1067, 1071, 1074, 1077, 1082, 1087, 1088, 1092, 1093, 1094, 1095 and 1096 are preserved

France

France used a fairly large number of 2-8-2s in both tender and tank configurations, designated 141 class from the French classification system of wheel arrangements.

Tender locomotives

Of the pre-nationalisation railway companies that existed before the formation of the Société Nationale des Chemins de fer Français, the Chemins de fer de Paris à Lyon et à la Méditerranée had the most Mikados. Their first twelve were initially numbered from 1001 to 1012 and later renumbered to 141.A.1 to 141.A.12. The PLM's second series, numbered from 1013 to 1129 and later renumbered 141.B.1 to 141.B.117, were built by Baldwin Locomotive Works in the United States. Their third and largest class was numbered from 141.C.1 to 141.C.680. Of these latter locomotives, those fitted with feedwater heaters bore the class letter D. The PLM also rebuilt forty-four 141.C and 141.D class locomotives to 141.E class. The SNCF modified the PLM numbers by adding the regional prefix digit "5".
The PLM's 141.A class Mikados were copied by the Chemins de Fer du Nord, who had fifty, numbered from 4.1101 to 4.1150, which became 2-141.A.1 to 2-141.A.50 on the SNCF.
The Chemins de Fer de l'État also had a class of 250 Mikados, numbered from 141-001 to 141-250. These later became the 141.B class on the SNCF and were renumbered 3-141.B.1 to 3-141.B.250. After modifications, the 141.B class locomotives became the 141.C class, as well as one 141.D class and one 141.E class. No. has been preserved and designated a Monument historique.
The most powerful French Mikado was the SNCF 141.P class. At about, these engines were among the most efficient steam locomotives in the world, thanks to their compound design. They could burn 30% less fuel and use 40% less water than their 141.R class counterparts, but could not compete when it came to reliability. Every locomotive of this 318-strong class has been scrapped.
The most numerous steam locomotive class France had, was the American and Canadian-built 141.R class. Of the 1,340 locomotives ordered, however, only 1,323 entered service since sixteen engines were lost at sea during a storm off the coast of Newfoundland while being shipped to France, while one more was lost in Marseille harbour. They were praised for being easy to maintain and proved to be very reliable, which may account for the fact that they remained in service until the very end of the steam era in 1975. Twelve of these locomotives have been preserved.

Tank locomotives

The Chemins de fer d'Alsace et de Lorraine had a class of forty 2-8-2T locomotives, the T 14 class, later numbered SNCF to. They were identical to Germany's Prussian T 14 class locomotive and were built between 1914 and 1918.
The Chemins de fer de l'Est had two Mikado classes. The first was numbered from 4401 to 4512, later renumbered 141.401 to 141.512 and finally SNCF 1-141.TB.401 to 1-141.TB.512. The other was numbered from 141.701 to 141.742 and later SNCF 1-141.TC.701 to 1-141.TC.742.
The Chemin de Fer du Nord also had two 2-8-2T classes. The first, consisting of only two locomotives, was numbered 4.1201 and 4.1202, later renumbered 4.1701 and 4.1702 and finally SNCF 2-141.TB.1 and 2-141.TB.2. The second, with 72 locomotives, was numbered from 4.1201 to 4.1272 and later SNCF 2-141.TC.1 to 2-141.TC.72.
The Chemins de Fer de l'État also had two Mikado classes. The first, numbered from to, later became the SNCF 141.TC class and were renumbered 3-141.TC.1 to 3-141.TC.20. The second, numbered from to, later became the SNCF 141TD class and were renumbered to. They were copies of the series of the Chemins de fer de l'Est.
The Chemin de fer de Paris à Orléans also had two classes. The first was numbered from 5301 to 5490 and later SNCF to. The second was numbered from 5616 to 5740 and later 4-SNCF to.

Germany

German 2-8-2 tender locomotives were built in both passenger and freight versions.
Both standard gauge and narrow gauge 1D1 2-8-2 tank locomotive classes were used in Germany.

Broad gauge

On the gauge, the Class XD was the first 2-8-2 in India to be built in quantity. Introduced in 1927, 78 were built before the Second World War by Vulcan Foundry, North British Locomotive Company, Armstrong Whitworth and Škoda Works. Production resumed after the war, and 110 were built by NBL in 1945 and 1946, while Vulcan Foundry built the last six in 1948.
There was also a Class XE that was built by William Beardmore and Company and Vulcan Foundry. Wartime designs included the Class AWD and Class AWE, built by American company Baldwin Locomotive Works, and the Class X-Dominion built as part of Canada's Mutual Aid program by two Canadian companies, the Canadian Locomotive Company and Montreal Locomotive Works.
After the war, a new design was produced and placed in production in 1950. The Class WG was the main post-war broad gauge freight locomotive type of the Indian Railways. The first order of 200 was split evenly between NBL and Chittaranjan Locomotive Works. Apart from Indian manufacture, examples were also built in England, Scotland, Germany, Austria, the United States, Japan and Italy. By the time production ceased in 1970, 2,450 Class WG locomotives had been built.

Metre gauge

After the First World War, an Indian Railway Standards 2-8-2 class became the main heavy freight locomotive on the. While two versions were designed, the Class YD with a 10-ton axle load and the Class YE with a 12-ton axle load, none was built of the latter class.
During the Second World War, many of the war-time United States Army Transportation Corps S118 class locomotives were sent to India and 33 more were ordered after the war.
The post-Second World War Mikado design was the Class YG, of which 1,074 were built between 1949 and 1972, with nearly half of them being manufactured in India.

Narrow gauges

Two narrow track gauges were in use in India. The gauge was the more widely used while the gauge was used by the Darjeeling Himalayan Railway and the Scindia State Railway. Mikado type locomotives were used by the following:
The standard narrow gauge 2-8-2 locomotive was the ZE class, with 65 engines built by five companies between 1928 and 1954. Nasmyth, Wilson built ten in 1928, Hanomag built sixteen in 1931, Corpet-Louvet built twelve in 1950, Krauss-Maffei built fifteen in 1952 and another ten in 1954, and Kawasaki Heavy Industries built ten in 1954. In 1957 and 1958, six ZD class locomotives were also built by Nippon Sharyo in Japan.

Indonesia

Before 1945, the Dutch East Indies Railway Administration, Staatspoorwegen, introduced two types of locomotives with a 2-8-2 wheel arrangement, the class 1500 tender engine of 1920, later renumbered as class D51, and the class 1400 tank engine of 1921-22, later renumbered as class D14. The class 1500 was originally used on the Hedjaz Railway, but was later diverted to Java prior to the First World War.
After the independence of Indonesia in 1945, the government of Indonesia nationalised all of the Dutch-owned railway companies, including the SS whose name was later changed to Djawatan Kereta Api, the Departmental Agency of Railway. Shortly after, the DKA bought 100 new steam locomotives with a Mikado wheel arrangement from Krupp in Germany. These locomotives, designated the D52 type, were the most modern steam locomotive in Indonesia at that time, with a large physical appearance and equipped with electric lighting. It was similar to the Class 41 locomotive of the Deutsche Reichsbahn.
In Java, the D52 locomotives were placed in passenger service, but was occasionally also used as freight locomotives. Some people even idolized the D52 because of its loyalty in taking passengers anywhere, as happened on the Rapih Dhoho Train from Madiun to Kertosono. The D52 was a mainstay for this train until the end of steam operation in Indonesia.
In contrast to the Java-based units, Sumatra-based D52 locomotives were used for hauling freight trains, mainly coal trains from the Tanjung Enim coal mine, now owned by the PT Bukit Asam mining company, to the coal dumping sites at Kertapati and Tarahan.
The D52 locomotives were initially coal-fired but, from mid-1956, 28 locomotives, numbers D52002 to D52029, were converted to oil burners. The work was done in stages over five years by the locomotive repair shop at Madiun.
One locomotive from this class was written off from service near Linggapura station after a boiler explosion that killed its driver, as a result of steam pipe failure. The only one of the original 100 locomotives that survived into the 21st century is D52 number D52099, which is on display at the Transport Museum in Taman Mini Indonesia Indah.

Italy

Italian railways relied primarily on 2-6-2s for fast passenger services, while heavy passenger service was assigned to 2-8-0s of the classes 744 and 745. Although Mikado types had little opportunity for development in Italy, Ferrovie dello Stato commissioned the class 746 for heavy passenger service on the Adriatic route. To serve local branches and mountain lines where tank locomotives were more suitable, FS derived the new class 940 from the 2-8-0 class 740, with the same dimensions but adding a rear Bissel truck to support the coal bunker behind the cab to make it a 2-8-2.

Japan

The Japanese Government Railways built the Class D51 Mikado tender locomotive for use on the gauge lines on the Japanese mainland and in its former colonies. One is plinthed at Kiso-Fukushima station on the Nagoya - Nagano line.

New Zealand

Only one 2-8-2 locomotive ever operated on New Zealand's national rail network, and it was not even ordered by the New Zealand Railways Department, who ran almost the entire network. The locomotive was ordered in 1901 from Baldwin Locomotive Works by the Wellington and Manawatu Railway Company for use on their main line's steep section between Wellington and Paekakariki. It entered service on 10 June 1902 as the WMR's no. 17. At the time, it was the most powerful locomotive in New Zealand and successfully performed its intended tasks.
When the WMR was incorporated into the national network in 1908, the Railways Department reclassified no. 17 as the solitary member of the BC class, no. BC 463, and the locomotive continued to operate on the Wellington-Paekakariki line until it was withdrawn on 31 March 1927.

South Africa

Only six Mikado locomotive classes saw service in South Africa, five on Cape gauge and one on narrow gauge. The type was rare, with only two of these classes built in quantity.

Cape gauge

During 1887, designs for a 2-8-2 Mikado type tank-and-tender locomotive were prepared by the Natal Government Railways. The single locomotive was built in the Durban workshops and entered service in 1888, named Havelock, but was soon rebuilt to a Pacific configuration. The engine Havelock was the first locomotive to be designed and built in South Africa and also the first to have eight-coupled wheels.
In 1903, the Cape Government Railways placed two Cape Class 9 2-8-2 locomotives in service, designed by H.M. Beatty, Locomotive Superintendent of the CGR from 1896 to 1910, and built by Kitson and Company. They had bar frames, Stephenson's link motion valve gear and used saturated steam. In comparison with the Cape Class 8 2-8-0 locomotive of 1901, however, it was found that their maintenance costs were much higher without any advantage in terms of efficiency. As a result, no more of the type were ordered. In 1912, when these locomotives were assimilated into the South African Railways, they were classified as Class Experimental 4.
In 1904, the Central South African Railways placed 36 Class 11 Mikados in service. Built by the North British Locomotive Company, it was designed by P.A. Hyde, Chief Locomotive Superintendent of the CSAR from 1902 to 1904, for goods train service on the Witwatersrand. It was superheated, with a Belpaire firebox, Walschaerts valve gear and plate frame. The Class 11 designation was retained when the CSAR was amalgamated into the SAR in 1912.
In 1906, the CGR placed a single experimental 2-8-2 in service, designed by H.M. Beatty and built by Kitson. It was a larger version of the Cape Class 9 in all respects, also with a bar frame, Stephenson's link motion valve gear and using saturated steam. The locomotive was not classified and was simply referred to as "the Mikado". On the CGR it was exceeded in size only by the Kitson-Meyer 0-6-0+0-6-0 of 1904. At the time, it was considered as a big advance in motive power, but the design was never repeated and the Cape Mikado remained unique. In 1912, it was classified as Class Experimental 5 on the SAR.
In 1917, the South African Railways placed at least four, possibly six, Mikado type steam locomotives in service. They had been built for the Chemins de Fer du Bas Congo á Katanga in the Belgian Congo and were obtained on temporary lease, to alleviate the critical shortage of locomotives as a result of the First World War's disruption of locomotive production in Europe and the United Kingdom. The Katanga Mikados, as the locomotives were known on the SAR, were all forwarded to the Belgian Congo after the war.

Narrow gauge

Between 1931 and 1958, 21 narrow gauge Class NG15 Mikados, developed from the Class Hd and Class NG5 of South West Africa, were acquired for the Otavi Railway in SWA. Designed by the SAR, it was built by Henschel & Son and Société Franco-Belge. A major improvement on the earlier locomotives was the use of a Krauss-Helmholtz bogie, with the leading pair of driving wheels linked to the leading pony truck. The leading driving wheels had a limited amount of sideplay while the axle still remained parallel to the other three driving axles at all times, thus allowing the locomotive to negotiate sharper curves than its two predecessors. When the SWA narrow gauge line was regauged to Cape gauge in 1960, all these locomotives were transferred to the Eastern Cape for further service on the Langkloof narrow gauge line from Port Elizabeth to Avontuur. Here they were nicknamed the Kalahari.

South West Africa (Namibia)

Two very similar Mikado classes saw service on the narrow gauge Otavi Railway in South West Africa.
In 1912, the German administration in Deutsch-Südwest-Afrika acquired three locomotives for use on the line from Swakopmund to Karibib. They were built by Henschel & Son and were designated Class Hd. The locomotives were superheated, with Heusinger valve gear, piston valves and outside plate frames. Since they did not have separate bogie trucks, the leading and trailing carrying wheels were arranged as radial axles to allow for sideways motion of the wheels with respect to the locomotive frame. After the First World War, they were taken onto the roster of the South African Railways and later reclassified as Class NG5 along with the similar locomotives of 1922.
In 1922, the SAR placed six Class NG5 locomotives in service on the Otavi branch in SWA, also built by Henschel. They were built to the same design as the Class Hd, but had a different coupled wheel suspension arrangement, different boilers and slide valves. In service, they were operated in a common pool with the Class Hd locomotives until they were all withdrawn from service when the SWA system was regauged to Cape gauge in 1960.

Soviet Union

At the end of the Second World War, several gauge Japanese Class D51 locomotives were left behind on Russia's Sakhalin island, formerly Karafuto, by retreating Japanese forces. In addition, two Class D51 wrecks were abandoned to the north of the city. Until 1979, the serviceable Japanese locomotives were used on the island by the Soviet Railways.
One was then plinthed outside the Yuzhno-Sakhalinsk railway station, and another is still in running condition and is kept at the Yuzhno-Sakhalinsk railway station.
The Sakhalin Railway has a connection with the mainland via a train ferry operating between Kholmsk on the island and Vanino on the mainland. The Japanese gauge still remains in use on the island, although in 2004 conversion began to the Russian gauge.

Spain

The network of Spain used one Mikado tank locomotive and two versions of tender locomotives.
The Spanish manufacturer MTM delivered six 2-8-2T locomotives to the Madrid-Caceres-Portugal line in 1925. A project at MTM in 1942 to build a big 2-8-2 never realised.
The first tender version was built by two American companies in 1917, fifteen by Brooks Locomotive Works and forty by Schenectady Locomotive Works. They were numbered from 4501 to 4555 and were a slightly smaller version of the USRA Light Mikado. The locomotives served well in the Norte system, where they were nicknamed Chalecos.
In 1953, RENFE, the nationalised railway company, acquired twenty-five locomotives of the second tender version from North British Locomotive Company of Glasgow. Spanish builders MTM, MACOSA and Euskalduna and the American Babcock & Wilcox built 213 more between 1953 and 1960, with only minor detail differences such as double chimneys, Llubera sanders, ACFI feedwater heaters and oil-burning. Their empty weight was and they had diameter coupled wheels. They performed well in both freight and passenger service and lasted until the official end of steam in common service in 1975.
One Norte and eighteen RENFE locomotives are preserved, three of them in good working condition.

Thailand (Siam)

The first Mikado locomotives of the Royal State Railways of Siam, the predecessor of the State Railway of Thailand, were acquired from 1923 as standard locomotives for express and mixed trains, to supersede the E-Class locomotives which had been commissioned between 1915 and 1921. The first Siamese Mikado class was built by Baldwin Locomotive Works in 1923, Nasmyth, Wilson and Company in 1924 and Batignolles-Châtillon, France in 1925.
However, it was not until the first batch of eight of Thailand's second class of 2-8-2 locomotives, numbers 351 to 358, was imported from Japan in 1936 that Mikado locomotives really became successful in Thailand. The RSR imported more Mikado standard locomotives to meet railways as well as military demands between 1938 and 1945.
After the Second World War, in 1946, the RSR imported fifty used United States Army Transportation Corps S118 Class locomotives, the so-called MacArthur Locomotives. Another eighteen new engines of the same Class were purchased around 1948-1949 to meet the post-war demand.
The last type of Mikado steam locomotives for Thailand were seventy engines imported by SRT from Japan between 1949 and 1951, numbered 901 to 970. Of these, only Mikado no. 953 is still serviceable, even though it is no longer actively in use.

United Kingdom

The 2-8-2 wheel arrangement was rarely, but successfully, used on British rails. Sir Nigel Gresley of the London and North Eastern Railway designed two Mikado types of note:
The Great Western Railway operated a class of 54 2-8-2T engines that had been rebuilt from 2-8-0T locomotives by Charles Collett, chief mechanical engineer of the GWR. As early as 1906, the chief mechanical engineer at the time, G. J. Churchward, planned a class of Mikado tank engines to handle heavy coal trains in South Wales. The plan was abandoned, however, as it was feared they would be unable to handle the sharp curves present on Welsh mineral branches. Instead, Churchward designed the 4200 Class of 2-8-0 tank engines, of which nearly 200 were built.
In the 1930s, coal traffic declined with the result that many of these engines stood idle, since their limited operating range prevented them from being allocated to other mainline duties. Collett, as Churchward's successor, decided to rebuild some of the 4200 Class engines as 2-8-2Ts. The addition of a trailing axle increased the engine's operating range by allowing an increased coal and water storage capacity. Altogether 54 locomotives were modified in this manner. The 7200 Class tank engines, as they were known, remained in service until the end of steam in Britain in the early 1960s.

United States of America

The 2-8-2 saw great success in the United States, mostly as a freight locomotive. In the 1910s it largely replaced the 2-8-0 Consolidation as the main heavy freight locomotive type. Its tractive effort was similar to that of the best 2-8-0s, but a developing requirement for higher speed freight trains drove the shift to the 2-8-2 wheel arrangement.
, Strasburg, Pennsylvania
The Mikado type was, in turn, ousted from the top-flight trains by larger freight locomotive wheel arrangements such as the 2-8-4, 2-10-2, 2-10-4 and articulated locomotives, but no successor type became ubiquitous and the Mike remained the most common road freight locomotive with most railroads until the end of steam. More than 14,000 were built in the United States, about 9500 of these for North American service, constituting about one-fifth of all locomotives in service there at the time. The heaviest Mikados were the Great Northern's class O-8, with an axle load of.
Almost all North American railroads rostered the type, notable exceptions being the Boston and Maine, the Delaware and Hudson, the Cotton Belt and the Norfolk and Western. The largest users included the New York Central with 715 locomotives, the Baltimore and Ohio with 610, the Pennsylvania Railroad with 579, the Illinois Central with 565, the Milwaukee Road with 500 and the Southern with 435.

Yugoslavia

-built 2-8-2s were delivered to the railway of the Kingdom of Yugoslavia in 1930. These became the JDZ class 06, of which a few remain in the former Yugoslav nations.