WormBase


WormBase is an online biological database about the biology and genome of the nematode model organism Caenorhabditis elegans and contains information about other related nematodes. WormBase is used by the C. elegans research community both as an information resource and as a place to publish and distribute their results. The database is regularly updated with new versions being released every two months. WormBase is one of the organizations participating in the Generic Model Organism Database project.

Contents

WormBase comprises the following main data sets:
In addition, WormBase contains an up-to-date searchable bibliography of C. elegans research and is linked to the WormBook project.

Tools

WormBase offers many ways of searching and retrieving data from the database:
Sequence curation at WormBase refers to the maintenance and annotation of the primary genomic sequence and a consensus gene set.

Genome sequence

Even though the C. elegans genome sequence is the most accurate and complete eukaryotic genome sequence, it has continually needed refinement as new evidence has been created. Many of these changes were single nucleotide insertions or deletions, however several large mis-assemblies have been uncovered. For example, in 2005 a 39 kb cosmid had to be inverted. Other improvements have come from comparing genomic DNA to cDNA sequences and analysis of RNASeq high-throughput data. When differences between the genomic sequence and transcripts are identified, re-analysis of the original genomic data often leads to modifications of the genomic sequence.
The changes in the genomic sequence pose difficulties when comparing chromosomal coordinates of data derived from different releases of WormBase. To aid these comparisons, a coordinate re-mapping program and data are available from:
http://wiki.wormbase.org/index.php/Converting_Coordinates_between_releases

Gene structure models

All the gene-sets of the WormBase species were initially generated by gene prediction programs. Gene prediction programs give a reasonable set of gene structures, but the best of them only predict about 80% of the complete gene structures correctly. They have difficulty predicting genes with unusual structures, as well as those with a weak translation start signal, weak splice sites or single exon genes. They can incorrectly predict a coding gene model where the gene is a pseudogene and they predict the isoforms of a gene poorly, if at all.
The gene models of C. elegans, C. briggsae, C. remanei, and C. brenneri genes are manually curated. The majority of gene structure changes have been based on transcript data from large scale projects such as Yuji Kohara's EST libraries, Mark Vidal's Orfeome project Waterston and Hillier's Illumina data and Makedonka Mitreva's 454 data. However, other data types are useful in refining the structures, especially where expression is low and so transcripts are not sufficiently available. When genes are conserved between the available nematode species, comparative analysis can also be very informative.
WormBase encourages researchers to inform them via the help-desk if they have evidence for an incorrect gene structure. Any cDNA or mRNA sequence evidence for the change should be submitted to EMBL/GenBank/DDBJ; this helps in the confirmation and evidence for the gene model as WormBase routinely retrieve sequence data from these public databases. This also makes the data public, allowing appropriate reference and acknowledgement to the researchers.
When any change is made to a CDS, the old gene model is preserved as a ‘history’ object. This will have a suffix name like: “AC3.5:wp119”, where ‘AC3.5’ is the name of the CDS and the ‘119’ refers to the database release in which the change was made. The reason for the change and the evidence for the change are added to the annotation of the CDS – these can be seen in the Visible/Remark section of the CDS's ‘Tree Display’ section on the WormBase web site.

Gene nomenclature

Genes

In WormBase, a Gene is a region that is expressed or a region that has been expressed and is now a Pseudogene. Genes have unique identifiers like ‘WBGene00006415’. All C. elegans WormBase genes also have a Sequence Name, which is derived from the cosmid, fosmid or YAC clone on which they reside, for instance F38H4.7, indicating it is on the cosmid ‘F38H4’, and there are at least 6 other genes on that cosmid. If a gene produces a protein that can be classified as a member of a family, the gene may also be assigned a CGC name like tag-30 indicating that this is the 30th member of the tag gene family. Assignment of gene family names is controlled by WormBase and requests for names should be made, before publication, via the form at: http://tazendra.caltech.edu/~azurebrd/cgi-bin/forms/gene_name.cgi
There are a few exceptions to this format, like the genes cln-3.1, cln-3.2, and cln-3.3 which all are equally similar to the human gene CLN3.
Gene GCG names for non-elegans species in WormBase have the 3-letter species code prepended, like Cre-acl-5, Cbr-acl-5, Cbn-acl-5.
A gene can be a Pseudogene, or can express one or more non-coding RNA genes or protein-coding sequences.

Pseudogenes

Pseudogenes are genes that do not produce a reasonable, functional transcript. They may be pseudogenes of coding genes or of non-coding RNA and may be whole or fragments of a gene and may or may not express a transcript. The boundary between what is considered a reasonable coding transcript is sometimes subjective as, in the absence of other evidence, the use of weak splice sites or short exons can often produce a putative, though unsatisfactory, model of a CDS. Pseudogenes and genes with a problematic structure are constantly under review in WormBase and new evidence is used to try to resolve their status.

CDSs

Coding Sequences are the only part of a Gene's structure that is manually curated in WormBase. The structure of the Gene and its transcripts are derived from the structure of their CDSs.
CDSs have a Sequence Name that is derived from the same Sequence Name as their parent Gene object, so the gene ‘F38H4.7’ has a CDS called ‘F38H4.7’. The CDS specifies coding exons in the gene from the START codon up to the STOP codon.
Any gene can code for multiple proteins as a result of alternative splicing. These isoforms have a name that is formed from the Sequence Name of the gene with a unique letter appended. In the case of the gene bli-4 there are 6 known CDS isoforms, called K04F10.4a, K04F10.4b, K04F10.4c, K04F10.4d, K04F10.4e and K04F10.4f.
It is common to refer to isoforms in the literature using the CGC gene family name with a letter appended, for example pha-4a, however this has no meaning within the WormBase database and searches for pha-4a in WormBase will not return anything. The correct name of this isoform is either the CDS/Transcript name: F38A6.1a, or even better, the Protein name: WP:CE15998.

Gene transcripts

The transcripts of a gene in WormBase are automatically derived by mapping any available cDNA or mRNA alignments onto the CDS model. These gene transcripts will therefore often include the UTR exons surrounding the CDS. If there are no available cDNA or mRNA transcripts, then the gene transcripts will have exactly the same structure as the CDS that they are modelled on.
Gene transcripts are named after the Sequence Name of the CDS used to create them, for example, F38H4.7 or K04F10.4a.
However, if there is alternative splicing in the UTRs, which would not change the protein sequence, the alternatively spliced transcripts are named with a digit appended, for example: K04F10.4a.1 and K04F10.4a.2. If there are no isoforms of the coding gene, for example AC3.5, but there is alternative splicing in the UTRs, there will be multiple transcripts named AC3.5.1 and AC3.5.2, etc. If there are no alternate UTR transcripts the single coding_transcript is named the same as the CDS and does not have the.1 appended, as in the case of K04F10.4f.

Operons

Groups of genes which are co-transcribed as operons are curated as Operon objects. These have names like CEOP5460 and are manually curated using evidence from the SL2 trans-spliced leader sequence sites.

Non-coding RNA genes

There are several classes of non-coding RNA gene classes in WormBase:
There is also one scRNA gene.

Transposons

Transposons are not classed as genes and so do not have a parent gene object. Their structure is curated as a Transposon_CDS object with a name like C29E6.6.

Other species

The non-elegans species in WormBase have genomes that have been assembled from sequencing technologies that do not involve sequencing cosmids or YACs. These species therefore do not have sequence names for CDSs and gene transcripts that are based on cosmid names. Instead they have unique alphanumeric identifiers constructed like the names in the table below.
SpeciesExample Gene name
C. briggsaeCBG00001
C. remaneiCRE00001
C. brenneriCBN00001
C. japonicaCJA00001
Pristionchus pacificusPPA00001

Proteins

The protein products of gene are created by translating the CDS sequences. Each unique protein sequence is given a unique identifying name like WP:CE40440. Examples of the protein identifier names for each species in WormBase is given in the table, below.
SpeciesExample Protein name
C. elegansWP:CE00001
C. briggsaeBP:CBP00001
C. remaneiRP:RP00001
C. brenneriCN:CN00001
C. japonicaJA:JA00001
Pristionchus pacificusPP:PP00001
Heterorhabditis bacteriophoraHB:HB00001
Brugia malayiBM:BM00001
Meloidogyne haplaMH:MH00001
Meloidogyne incognitaMI:MI00001
Haemonchus contortusHC:HC00001

It is possible for two CDS sequences from separate genes, within a species, to be identical and so it is possible to have identical proteins coded for by separate genes. When this happens, a single, unique identifying name is used for the protein even though it is produced by two genes.

ParaSite

is a sub-portal for approximately 100 draft genomes of parasitic helminths developed at the European Bioinformatics Institute and Wellcome Trust Sanger Institute. All genomes are assembled and annotated. Additional information such as protein domains and Gene Ontology terms are also available. Gene trees allow the alignment of orthologues between parasitic worms, other nematodes and non-worm comparator species. A BioMart data-mining tool is offered to permit large scale access to the data.

WormBase management

WormBase is a collaboration among the European Bioinformatics Institute, Wellcome Trust Sanger Institute, Ontario Institute for Cancer Research, Washington University in St. Louis, and the California Institute of Technology. It is supported by the grant P41-HG002223 from the National Institutes of Health and the grant G0701197 from the British Medical Research Council. Caltech carries out the biological curation and develops the underlying ontologies, the EBI carries out sequence curation and computation as well as database builds, the Sanger is primarily involved in curation and display of parasitic nematode genomes and genes, and the OICR develops the website and main data mining tools.