Wallpaper group


A wallpaper group is a mathematical classification of a two-dimensional repetitive pattern, based on the symmetries in the pattern. Such patterns occur frequently in architecture and decorative art, especially in textiles and tiles as well as wallpaper.
The simplest wallpaper group, Group p1, applies when there is no symmetry other than the fact that a pattern repeats over regular intervals in two dimensions, as shown in the section on p1 below.
Consider the following examples of patterns with more forms of symmetry:
Examples A and B have the same wallpaper group; it is called p4m in the IUC notation and *442 in the orbifold notation. Example C has a different wallpaper group, called p4g or 4*2. The fact that A and B have the same wallpaper group means that they have the same symmetries, regardless of details of the designs, whereas C has a different set of symmetries despite any superficial similarities.
The number of symmetry groups depends on the number of dimensions in the patterns. Wallpaper groups apply to the two-dimensional case, intermediate in complexity between the simpler frieze groups and the three-dimensional space groups. Subtle differences may place similar patterns in different groups, while patterns that are very different in style, color, scale or orientation may belong to the same group.
A proof that there were only 17 distinct groups of such planar symmeries was first carried out by Evgraf Fedorov in 1891 and then derived independently by George Pólya in 1924. The proof that the list of wallpaper groups was complete only came after the much harder case of space groups had been done. The seventeen possible wallpaper groups are listed below in.

Symmetries of patterns

A symmetry of a pattern is, loosely speaking, a way of transforming the pattern so that it looks exactly the same after the transformation. For example, translational symmetry is present when the pattern can be translated some finite distance and appear unchanged. Think of shifting a set of vertical stripes horizontally by one stripe. The pattern is unchanged. Strictly speaking, a true symmetry only exists in patterns that repeat exactly and continue indefinitely. A set of only, say, five stripes does not have translational symmetry—when shifted, the stripe on one end "disappears" and a new stripe is "added" at the other end. In practice, however, classification is applied to finite patterns, and small imperfections may be ignored.
The types of transformations that are relevant here are called Euclidean plane isometries. For example:
However, example C is different. It only has reflections in horizontal and vertical directions, not across diagonal axes. If we flip across a diagonal line, we do not get the same pattern back; what we do get is the original pattern shifted across by a certain distance. This is part of the reason that the wallpaper group of A and B is different from the wallpaper group of C.
Another transformation is "Glide", a combination of reflection and translation parallel to the line of reflection.

Formal definition and discussion

Mathematically, a wallpaper group or plane crystallographic group is a type of topologically discrete group of isometries of the Euclidean plane that contains two linearly independent translations.
Two such isometry groups are of the same type if they are the same up to an affine transformation of the plane. Thus e.g. a translation of the plane does not affect the wallpaper group. The same applies for a change of angle between translation vectors, provided that it does not add or remove any symmetry.
Unlike in the three-dimensional case, we can equivalently restrict the affine transformations to those that preserve orientation.
It follows from the Bieberbach theorem that all wallpaper groups are different even as abstract groups.
2D patterns with double translational symmetry can be categorized according to their symmetry group type.

Isometries of the Euclidean plane

Isometries of the Euclidean plane fall into four categories.
The condition on linearly independent translations means that there exist linearly independent vectors v and w such that the group contains both Tv and Tw.
The purpose of this condition is to distinguish wallpaper groups from frieze groups, which possess a translation but not two linearly independent ones, and from two-dimensional discrete point groups, which have no translations at all. In other words, wallpaper groups represent patterns that repeat themselves in two distinct directions, in contrast to frieze groups, which only repeat along a single axis.

The discreteness condition

The discreteness condition means that there is some positive real number ε, such that for every translation Tv in the group, the vector v has length at least ε.
The purpose of this condition is to ensure that the group has a compact fundamental domain, or in other words, a "cell" of nonzero, finite area, which is repeated through the plane. Without this condition, we might have for example a group containing the translation Tx for every rational number x, which would not correspond to any reasonable wallpaper pattern.
One important and nontrivial consequence of the discreteness condition in combination with the independent translations condition is that the group can only contain rotations of order 2, 3, 4, or 6; that is, every rotation in the group must be a rotation by 180°, 120°, 90°, or 60°. This fact is known as the crystallographic restriction theorem, and can be generalised to higher-dimensional cases.

Notations for wallpaper groups

Crystallographic notation

Crystallography has 230 space groups to distinguish, far more than the 17 wallpaper groups, but many of the symmetries in the groups are the same. Thus we can use a similar notation for both kinds of groups, that of Carl Hermann and Charles-Victor Mauguin. An example of a full wallpaper name in Hermann-Mauguin style is p31m, with four letters or digits; more usual is a shortened name like cmm or pg.
For wallpaper groups the full notation begins with either p or c, for a primitive cell or a face-centred cell; these are explained below. This is followed by a digit, n, indicating the highest order of rotational symmetry: 1-fold, 2-fold, 3-fold, 4-fold, or 6-fold. The next two symbols indicate symmetries relative to one translation axis of the pattern, referred to as the "main" one; if there is a mirror perpendicular to a translation axis we choose that axis as the main one. The symbols are either m, g, or 1, for mirror, glide reflection, or none. The axis of the mirror or glide reflection is perpendicular to the main axis for the first letter, and either parallel or tilted 180°/n for the second letter. Many groups include other symmetries implied by the given ones. The short notation drops digits or an m that can be deduced, so long as that leaves no confusion with another group.
A primitive cell is a minimal region repeated by lattice translations. All but two wallpaper symmetry groups are described with respect to primitive cell axes, a coordinate basis using the translation vectors of the lattice. In the remaining two cases symmetry description is with respect to centred cells that are larger than the primitive cell, and hence have internal repetition; the directions of their sides is different from those of the translation vectors spanning a primitive cell. Hermann-Mauguin notation for crystal space groups uses additional cell types.
;Examples
Here are all the names that differ in short and full notation.
The remaining names are
p
1
, p2, p3, p3m1, p31m, p4, and p6.

Orbifold notation

for wallpaper groups, advocated by John Horton Conway , is based not on crystallography, but on topology. We fold the infinite periodic tiling of the plane into its essence, an orbifold, then describe that with a few symbols.
Consider the group denoted in crystallographic notation by cmm; in Conway's notation, this will be 2*22. The 2 before the * says we have a 2-fold rotation centre with no mirror through it. The * itself says we have a mirror. The first 2 after the * says we have a 2-fold rotation centre on a mirror. The final 2 says we have an independent second 2-fold rotation centre on a mirror, one that is not a duplicate of the first one under symmetries.
The group denoted by pgg will be 22×. We have two pure 2-fold rotation centres, and a glide reflection axis. Contrast this with pmg, Conway 22*, where crystallographic notation mentions a glide, but one that is implicit in the other symmetries of the orbifold.
Coxeter's bracket notation is also included, based on reflectional Coxeter groups, and modified with plus superscripts accounting for rotations, improper rotations and translations.
Conway
Coxeter+
Crystallographicp1pgcmpmp6p6m

Conway222222×22**22222*22
Coxeter+
Crystallographicp2pggpmgpmmcmm

Why there are exactly seventeen groups

An orbifold can be viewed as a polygon with face, edges, and vertices which can be unfolded to form a possibly infinite set of polygons which tile either the sphere, the plane or the hyperbolic plane. When it tiles the plane it will give a wallpaper group and when it tiles the sphere or hyperbolic plane it gives either a spherical symmetry group or Hyperbolic symmetry group. The type of space the polygons tile can be found by calculating the Euler characteristic, χ = VE + F, where V is the number of corners, E is the number of edges and F is the number of faces. If the Euler characteristic is positive then the orbifold has an elliptic structure; if it is zero then it has a parabolic structure, i.e. a wallpaper group; and if it is negative it will have a hyperbolic structure. When the full set of possible orbifolds is enumerated it is found that only 17 have Euler characteristic 0.
When an orbifold replicates by symmetry to fill the plane, its features create a structure of vertices, edges, and polygon faces, which must be consistent with the Euler characteristic. Reversing the process, we can assign numbers to the features of the orbifold, but fractions, rather than whole numbers. Because the orbifold itself is a quotient of the full surface by the symmetry group, the orbifold Euler characteristic is a quotient of the surface Euler characteristic by the order of the symmetry group.
The orbifold Euler characteristic is 2 minus the sum of the feature values, assigned as follows:
For a wallpaper group, the sum for the characteristic must be zero; thus the feature sum must be 2.
;Examples
Now enumeration of all wallpaper groups becomes a matter of arithmetic, of listing all feature strings with values summing to 2.
Feature strings with other sums are not nonsense; they imply non-planar tilings, not discussed here..

Guide to recognizing wallpaper groups

To work out which wallpaper group corresponds to a given design, one may use the following table.


See also.

The seventeen groups

Each of the groups in this section has two cell structure diagrams, which are to be interpreted as follows :
a centre of rotation of order two.
a centre of rotation of order three.
a centre of rotation of order four.
a centre of rotation of order six.
an axis of reflection.
an axis of glide reflection.

On the right-hand side diagrams, different equivalence classes of symmetry elements are colored differently.
The brown or yellow area indicates a fundamental domain, i.e. the smallest part of the pattern that is repeated.
The diagrams on the right show the cell of the lattice corresponding to the smallest translations; those on the left sometimes show a larger area.

Group [|''p''1] (o)

;Examples of group p1
The two translations can each have different lengths, and can form any angle.

Group [|''p''2] (2222)

;Examples of group p2

Group [|''pm''] (**)


Horizontal mirrors

Vertical mirrors

;Examples of group pm

Group [|''pg''] (××)

;Examples of group pg
Without the details inside the zigzag bands the mat is pmg; with the details but without the distinction between brown and black it is pgg.
Ignoring the wavy borders of the tiles, the pavement is pgg.

Group [|''cm''] (*×)

;Examples of group cm

Group [|''pmm''] (*2222)


rectangular

square

;Examples of group pmm

Group [|''pmg''] (22*)


Horizontal mirrors

Vertical mirrors

;Examples of group pmg

Group [|''pgg''] (22×)


Rectangular

Square

;Examples of group pgg

Group [|''cmm''] (2*22)


Rhombic

Square

The rotational symmetry of order 2 with centres of rotation at the centres of the sides of the rhombus is a consequence of the other properties.
The pattern corresponds to each of the following:
;Examples of group cmm

Group [|''p''4] (442)

;Examples of group p4
A
p4 pattern can be looked upon as a repetition in rows and columns of equal square tiles with 4-fold rotational symmetry. Also it can be looked upon as a checkerboard pattern of two such tiles, a factor smaller and rotated 45°.

Group [|''p''4''m''] (*442)

This corresponds to a straightforward grid of rows and columns of equal squares with the four reflection axes. Also it corresponds to a checkerboard pattern of two of such squares.
;Examples of group p4m
Examples displayed with the smallest translations horizontal and vertical :
Examples displayed with the smallest translations diagonal:

Group ''p''4''g'' (4*2)

A p4g pattern can be looked upon as a checkerboard pattern of copies of a square tile with 4-fold rotational symmetry, and its mirror image. Alternatively it can be looked upon as a checkerboard pattern of copies of a horizontally and vertically symmetric tile and its 90° rotated version. Note that neither applies for a plain checkerboard pattern of black and white tiles, this is group p4m.
;Examples of group p4g

Group [|''p''3] (333)

Imagine a tessellation of the plane with equilateral triangles of equal size, with the sides corresponding to the smallest translations. Then half of the triangles are in one orientation, and the other half upside down. This wallpaper group corresponds to the case that all triangles of the same orientation are equal, while both types have rotational symmetry of order three, but the two are not equal, not each other's mirror image, and not both symmetric. For a given image, three of these tessellations are possible, each with rotation centres as vertices, i.e. for any tessellation two shifts are possible. In terms of the image: the vertices can be the red, the blue or the green triangles.
Equivalently, imagine a tessellation of the plane with regular hexagons, with sides equal to the smallest translation distance divided by √3. Then this wallpaper group corresponds to the case that all hexagons are equal and have rotational symmetry of order three, while they have no mirror image symmetry. For a given image, three of these tessellations are possible, each with one third of the rotation centres as centres of the hexagons. In terms of the image: the centres of the hexagons can be the red, the blue or the green triangles.
;Examples of group p3

Group [|''p''3''m''1] (*333)

Like for p3, imagine a tessellation of the plane with equilateral triangles of equal size, with the sides corresponding to the smallest translations. Then half of the triangles are in one orientation, and the other half upside down. This wallpaper group corresponds to the case that all triangles of the same orientation are equal, while both types have rotational symmetry of order three, and both are symmetric, but the two are not equal, and not each other's mirror image. For a given image, three of these tessellations are possible, each with rotation centres as vertices. In terms of the image: the vertices can be the red, the dark blue or the green triangles.
;Examples of group p3m1

Group [|''p''31''m''] (3*3)

Like for p3 and p3m1, imagine a tessellation of the plane with equilateral triangles of equal size, with the sides corresponding to the smallest translations. Then half of the triangles are in one orientation, and the other half upside down. This wallpaper group corresponds to the case that all triangles of the same orientation are equal, while both types have rotational symmetry of order three and are each other's mirror image, but not symmetric themselves, and not equal. For a given image, only one such tessellation is possible. In terms of the image: the vertices can not be dark blue triangles.
;Examples of group p31m

Group [|''p''6] (632)

A pattern with this symmetry can be looked upon as a tessellation of the plane with equal triangular tiles with C3 symmetry, or equivalently, a tessellation of the plane with equal hexagonal tiles with C6 symmetry.
;Examples of group p6

Group [|''p''6''m''] (*632)

A pattern with this symmetry can be looked upon as a tessellation of the plane with equal triangular tiles with D3 symmetry, or equivalently, a tessellation of the plane with equal hexagonal tiles with D6 symmetry. Thus the simplest examples are a triangular lattice with or without connecting lines, and a hexagonal tiling with one color for outlining the hexagons and one for the background.
;Examples of group p6m

Lattice types

There are five lattice types or Bravais lattices, corresponding to the five possible wallpaper groups of the lattice itself. The wallpaper group of a pattern with this lattice of translational symmetry cannot have more, but may have less symmetry than the lattice itself.
The actual symmetry group should be distinguished from the wallpaper group. Wallpaper groups are collections of symmetry groups. There are 17 of these collections, but for each collection there are infinitely many symmetry groups, in the sense of actual groups of isometries. These depend, apart from the wallpaper group, on a number of parameters for the translation vectors, the orientation and position of the reflection axes and rotation centers.
The numbers of degrees of freedom are:
However, within each wallpaper group, all symmetry groups are algebraically isomorphic.
Some symmetry group isomorphisms:
Note that when a transformation decreases symmetry, a transformation of the same kind obviously for some patterns increases the symmetry. Such a special property of a pattern is not counted as a form of extra symmetry.
Change of colors does not affect the wallpaper group if any two points that have the same color before the change, also have the same color after the change, and any two points that have different colors before the change, also have different colors after the change.
If the former applies, but not the latter, such as when converting a color image to one in black and white, then symmetries are preserved, but they may increase, so that the wallpaper group can change.

Web demo and software

Several software graphic tools will let you create 2D patterns using wallpaper symmetry groups. Usually you can edit the original tile and its copies in the entire pattern are updated automatically.