Viking sword


The Viking Age sword or Carolingian sword is the type of sword prevalent in Western and Northern Europe during the Early Middle Ages.
The Viking Age or Carolingian-era sword developed in the 8th century from the Merovingian sword and during the 11th to 12th century in turn gave rise to the knightly sword of the Romanesque period.

Terminology

Although popularly called "Viking sword", this type of sword was produced in the Frankish Empire during the Carolingian era. The association of the name "Viking" with these swords is due to the disappearance of grave goods in Christian Francia in the 8th century, due to which the bulk of sword blades of Frankish manufacture of this period were found in pagan burials of Viking Age Scandinavia, imported by trade, ransom payment or looting, while continental European finds are mostly limited to stray finds in riverbeds.
Swords of the 8th to 10th centuries are also termed "Carolingian swords", while swords of the late Viking Age and the beginning High Middle Ages blend into the category of Norman swords or the early development of the knightly sword.

History

During the reign of Charlemagne, the price of a sword with scabbard was set at seven solidi .
Swords were still comparatively costly weapons, although not as exclusive as during the Merovingian period, and in Charlemagne's capitularies, only members of the cavalry, who could afford to own and maintain a warhorse, were required to be equipped with swords.
Regino's Chronicle suggests that by the end of the 9th century, the sword was seen as the principal weapon of the cavalry.
There are very few references to Carolingian-era sword production, apart from a reference to emundatores vel politores present in the workshops of the Abbey of Saint Gall. Two men sharpening swords, one using a grindstone the other a file, are shown in the Utrecht Psalter.
The sword gradually replaced the seax during the late 8th to early 9th century.
Because grave goods were no longer deposited in Francia in the 8th century, continental finds are mostly limited to stray finds in riverbeds, and most extant examples of Carolingian swords are from graves from northern or eastern cultures where pagan burial customs were still in effect.
Pattern welding fell out of use in the 9th century, as higher quality steel became available. Better steel also allowed the production of narrower blades, and the swords of the 9th century have more pronounced tapering than their 8th-century predecessors, shifting the point of balance towards the hilt.
Coupland proposes that this development may have accelerated the disappearance of the sax, as the sword was now available for swift striking, while the migration-period spatha was mostly used to deliver heavy blows aimed at damaging shields or armour. The improved morphology combined maneuverability and weight in a single weapon, rendering the sax redundant.

Culture

Swords were very costly to make, and a sign of high status. Owning a sword was a matter of high honour. Persons of status might own ornately decorated swords with silver accents and inlays. Most Viking warriors would own a sword as one raid was usually enough to afford a good blade. Most freemen would own a sword with goðar, jarls and sometimes richer freemen owning much more ornately decorated swords. The poor farmers would use an axe or spear instead but after a couple of raids they would then have enough to buy a sword. One sword mentioned in the Laxdæla saga was valued at half a crown, which would correspond to the value of 16 milk-cows. Constructing such weapons was a highly specialized endeavour and many sword-blades were imported from foreign lands, such as the Rhineland. Swords could take up to a month to forge and were of such high value that they were passed on from generation to generation. Often, the older the sword, the more valuable it became. Local craftsmen often added their own elaborately decorated hilts, and many swords were given names, such as Leg-biter and Gold-hilt.
As mentioned above, a sword was so valued in Norse society that good blades were prized by successive generations of warriors. There is even some evidence from Viking burials for the deliberate and possibly ritual "killing" of swords, which involved the blade being bent so that it was unusable. Because Vikings were often buried with their weapons, the "killing" of swords may have served two functions. A ritualistic function in retiring a weapon with a warrior, and a practical function in deterring any grave robbers from disturbing the burial in order to get one of these costly weapons. Indeed, archaeological finds of the bent and brittle pieces of metal sword remains testify to the regular burial of Vikings with weapons, as well as the habitual "killing" of swords. The Swords were not exclusive to the Vikings, but rather was used throughout Europe

Handle

The Frankish swords often had pommels shaped in a series of three or five rounded lobes. This was a native Frankish development which did not exist prior to the 8th century, and the design is frequently represented in the pictorial art of the period, e.g. in the Stuttgart Psalter, Utrecht Psalter, Lothar Gospels and Bern Psychomachia manuscripts, as well as in the wall frescoes in the church in Mals, South Tyrol.
Likewise, the custom of inlaid inscriptions in the blades is Frankish innovation dating to the reign of Charlemagne, notably in the Ulfberht group of blades, but continued into the high medieval period and peaking in popularity in the 12th century.
While blade inscriptions become more common over the Viking Age, the custom of hilt decorations in precious metals, inherited from the Merovingian sword and widespread during the 8th and 9th centuries, is in decline over the course of the 10th century. Most swords made in the later 10th century in what was now the Holy Roman Empire, while still conforming to the "Viking sword" type morphologically, have plain steel hilts.

Trade

The distribution of Frankish blades throughout Scandinavia and as far east as Volga Bulgaria attest to the considerable importance of Frankish arms exports, even though Carolingian kings attempted to prevent the export of weapons to potential enemies; in 864, Charles the Bald set the death penalty on selling weapons to the Vikings. Ibn Fadlan in the 10th century notes explicitly that the Volga Vikings carried Frankish swords.
The Saracens raiding Camargue in 869 demanded 150 swords as ransom for archbishop Rotland of Arles.
Foreign-made, specifically Frankish, weapons and armour played a special role in Norse society. Norsemen attained them either through trade or as plunder. Therefore, their possession and display by any individual would signify their station in the social hierarchy and any political allegiances they had. One example of an exchange of weapons between the Franks and the Anglo-Saxons occurred in 795 when Charlemagne exchanged weapons with the Anglo-Saxon king Offa of Mercia.
Scandinavian affinity towards foreign arms and armour during the Viking Age had an eminently practical aspect. Norse weapon designs were obsolete and sources of iron within Scandinavia were of poor quality. Many of the most important Viking weapons were highly ornate—decorated lavishly with gold and silver. Weapons adorned as such served large religious and social functions. These precious metals were not produced in Scandinavia and they too would have been imported. Once in Scandinavia, the precious metals would have been inlaid in the pommels and blades of weapons creating geometric patterns, depictions of animals, and Christian symbols.
During the mid-9th century, there was an influx of these high-quality weapons into Scandinavia, and Frankish arms became the standard for all Vikings. As Ahmad ibn Fadlan observed in his account of his journey to Russia, every Viking carried a "sword of the Frankish type". The Franks attempted to limit the Vikings' use of weapons and armour produced in Francia—fearing that they would eventually face equally armed opponents. Chapter 10 of the Capitulare Bononiense of 811 made it illegal for any clerical functionary to supply swords or armour to non-Frankish individuals. Laws like this were enacted throughout Francia. Ultimately, in 864, King Charles the Bald of West Francia made the practice punishable by death. Some scholars have proposed that such laws proved so effective at stemming the flow of Frankish weapons that they initiated the practice of raiding for which Vikings became notorious.

Scabbards

Carolingian scabbards were made of wood and leather. Scabbard decorations are depicted in several manuscripts. A number of miniatures also show the system of suspension of the sword by means of the sword-belt. While the scabbards and belts themselves are almost never preserved, their metal mounts have been found in Scandinavian silver hoards and in Croatian graves. A complete set seems to have included two to three oval or half-oval mounts, one large strap-end, a belt buckle and a trefoil mount. Their arrangement on the sword-belt has been reconstructed by Menghin.

Morphology

The seminal study of the topic is due to Jan Petersen.
Petersen: Devised the original hilt typology of 26 types that is still widely used across Europe for classifying and dating Viking swords. Based on about 1,700 finds of Viking swords in Norway this typology remains the most commonly used. Petersen's types are identified by capital letters A–Z. Petersen listed a total of 110 specimens found in Norway. Of these, 40 were double-edged, 67 were single-edged and 3 indeterminateThe seminal study of the topic is due to Jan Petersen.
R. E. M. Wheeler : Created a simplified typology of sword hilts based on finds from Britain, combining Petersen's hilt typology with a blade typology, in nine types labelled I to IX.
Oakeshott : Added two more types to Wheelers typology bridging the gap between the Viking Age and the later mediaeval sword.
Geibig : introduced an additional typology based on blade morphology and a typology of pommel shapes, focussing on swords of the 8th to 12th centuries found within the boundaries of East Francia.
Oakeshott : Mainly dealing with sword from the post Viking-age period. He classifies all of the Viking Age swords as his type X.
Jakobsson : has recently published a number of maps detailing the distribution patterns of Petersen’s sword hilts across Europe. Jokobsson's conclusions are discussed in Ian Peirce's 'Swords from the Viking Age'
Peirce : Oakeshott provides an overview of typologies and a discussion on inscribed blades. Jones also provides an overview of hilt and blade classifications, provides a summary of Jakobsson's and Geibig's work and provides an updated typology date range chart. Peirce provides a catalogue of examples, detailing 85 complete or almost complete swords and comparing them to Petersen's discoveries.

Metallurgy

An important aspect in the development of the European sword between the early and high medieval periods is the availability of high-quality steel.
Migration period as well as early medieval sword blades were primarily produced by the technique of pattern welding, also known as "false Damascus" steel.
Blooms of high-quality steel large enough to produce an entire sword blade were only rarely available in Europe at the time, mostly via import from Central Asia, where a crucible steel industry began to establish itself from c. the 8th century.
Higher quality swords made after AD 1000 are increasingly likely to have crucible steel blades. The group of Ulfberht swords includes a wide spectrum of steel and production method. One example from a 10th-century grave in Nemilany, Moravia, has a pattern-welded core with welded-on hardened cutting edges. Another example appears to have been made from high-quality hypoeutectoid steel possibly imported from Central Asia.

Notable examples