United States Passport Card


The United States passport card is an official identity and limited travel document issued by the United States federal government in the size of a credit card. It may often be used as an identity card for purposes other than international travel, such as domestic air travel. Like a U.S. passport book, the passport card is only issued to U.S. nationals exclusively by the U.S. Department of State, is compliant to the standards for identity documents set by the REAL ID Act and can be used as proof of U.S. citizenship. The passport card allows its holders to travel by domestic air flights within the United States, and to travel by land and sea within part of North America. However, the passport card cannot be used for international air travel.
The passport card was created as a result of the Western Hemisphere Travel Initiative, which imposed more stringent documentary requirements on travelers. Applications have been accepted since February 1, 2008; production of the cards began July 14, 2008. By the end of 2016, more than 12 million passport cards had been issued to U.S. citizens. The card is manufactured by L-1 Identity Solutions.
National identity cards with similar utility are common inside the European Union and EFTA countries for both national and international use, with the difference that such cards are often mandatory to carry in several of these countries. In contrast, there are only some states in the U.S. which have 'stop and identify statutes', and in these states, a driver's license will always suffice.

History

As a result of the September 11, 2001, attacks, the United States began implementing a range of measures to increase the security of its borders and its identity documents. One result of this was the Western Hemisphere Travel Initiative, which mandates as of 2007 that a smaller, more secure number of documents verifying both identity and citizenship be used to facilitate identification and international border crossing. Previous to the WHTI, many different types of documents were acceptable to cross the border, including birth certificates issued by thousands of different authorities within the United States and Canada. As a result of the WHTI, U.S. citizens traveling to Canada would have been required to obtain a passport booklet in order to enter the United States. In order to offer a less expensive and more portable alternative to border communities and frequent travelers, the passport card was developed.
In an effort to improve efficiency at land crossings, the passport card also includes a vicinity-read radio frequency identification chip with a unique identifying number tied to government databases. Unlike the passport book, the RFID chip in the passport card is designed to be readable at a greater distance, allowing border agents to access traveler information before they pull up to the inspection station. While a biometric passport contains a chip containing all of the traveler's information in electronic format, the RFID chip in a passport card does not contain any personal information beyond the identifying number, which is used to locate records in secure government databases. To prevent the RFID chip from being read when the card is not being used, the passport card comes with a sleeve designed to block RFID while inside.

Use

As an international travel document

U.S. passport cards can be used to enter the United States at land border crossings and sea ports of entry. It is also accepted for entry by land or sea into Canada, Mexico, and some countries and territories in the Caribbean. It cannot be used to travel by air to these countries, or by any means to other countries.
The Department of State stated that this limited validity is because "designing a card format passport for wide use, including by air travelers, would inadvertently undercut the broad based international effort to strengthen civil aviation security and travel document specifications to address the post 9/11 threat environment".

As personal identification

Aside from being unable to be used for international air travel, the passport card is treated as a passport for all other purposes. A United States passport card can be used as primary evidence of United States citizenship, just like a passport booklet, and can be used as a valid proof of citizenship and proof of identity both inside and outside the United States.

Within the United States

Under the REAL ID Act, the passport card is accepted for federal purposes, which may make it an attractive option for people whose driver's licenses and ID cards are not REAL ID-compliant when those requirements go into effect. TSA regulations list the passport card as an acceptable identity document at airport security checkpoints.
U.S. Citizenship and Immigration Services has indicated that the U.S. passport card may be used in the Employment Eligibility Verification Form I-9 process. The passport card is considered a "List A" document that may be presented by newly hired employees during the employment eligibility verification process to show work authorized status. "List A" documents are those used by employees to prove both identity and work authorization when completing the Form I-9.
Passport cards are much less popular than driver licenses, a commonly used form of identification. As previously stated, in 2014 there were more than 12 million passport cards issued. In contrast, in 2009 there were 210 million licensed drivers.

Outside the United States

In some countries, laws require foreign visitors and/or all adults to carry official personal identification at all times. Carrying a passport card may meet the demands of local law enforcement without the risks associated with carrying the full passport booklet.
Compared with state ID cards and driver's licenses, the passport card is designed to be more universal. It is formatted to United Nations ICAO machine readable document standards, which are used on IDs around the world. Also, unlike state driver's licenses, which may not even list the country on them, the passport card contains the words United States of America in its header. It also contains national symbols, such as a U.S. flag, in the background, as opposed to the state symbols found on driver's licenses. Since people abroad may not be familiar with every U.S. state, the passport card's emphasis on being from the United States makes it more understood in this regard.

Validity and fees

The passport card shares the same validity period as the passport book: 10 years for persons 16 and over, 5 years for children under 16. As of April 9, 2018, the passport card renewal fee for eligible applicants is $30; first-time applicants and those applying in person must also pay a $35 processing fee, for a total fee of $65. Passport cards for children must be applied for in person; the total fee is $50, including the $35 processing fee.
Adults who already have a fully valid passport book may pay a fee of $30 to apply for the card using the passport renewal form, regardless of when the passport book expires.
A citizen or national is allowed to hold both a passport card and a passport book. Both may be applied for simultaneously by paying the respective fees for each passport, plus a single $35 processing fee for first-time and other in-person applicants.

Card layout

The passport card is formatted according to specifications for credit card sized travel documents, as described in ICAO Document 9303, Part 3, Volume 1. The card contains both human-readable and machine-readable information; the latter is printed in the machine-readable zone on the rear of the card as OCR-readable text in a similar format as on the identity page of the passport book. The zone starts with the letters IP, followed by the issuing country code USA and then the passport card's serial number. The general layout of the passport card is virtually identical to the layout of the Border Crossing Card issued to Mexican citizens with primarily the background imagery and entitlements varying between the two cards.

Anti-counterfeiting features

In addition to the embedded RFID chip, the front of the card features a complex multi-layer hologram consisting of an American bald eagle surrounded by the words "United States of America Department of State" in a small clearly readable font, further surrounded by the same words repeatedly in microprint. The card's background consists of interweaving smooth curves rich in variable color and microprint. All of the personal information on the card is created by laser engraving, with some key information produced in raised tactile engraving, including the date of birth, vertical letters "USA", the passport card number, and an alphanumeric sequence underneath the photograph. A second, smaller "ghost" photograph of the bearer is included on the right side of the card; when closely inspected this ghost image is actually an approximation of the shading in the original photo composed of various letters from the card holder's name. There is an embossed seal in the upper left hand corner of the card depicting the obverse of the Great Seal of the United States. When viewed under UV lighting, a reddish-orange bald eagle in flight appears. The eagle carries thirteen arrows in one talon and an olive branch with thirteen leaves and thirteen olives on the branch. The eagle's image is 3-dimensional, with the flying figure poised above the shield from the Great Seal. In its beak, the eagle clutches a scroll with the motto E pluribus unum. On the rear of the card, the "PASSsystem" mark appears in optically variable ink, and the number, "C########", is a raised tactile engraving.