Type 98 20 mm AAG Tank


The Type 98 20 mm AAG Tank was a Japanese self-propelled anti-aircraft gun using a twin Soki Type II 20 mm anti-air gun. They were combined with the chassis of the Type 98 Ke-Ni. The gun crew worked from a raised platform with a modest amount of protection from the sides - the twin 20 mm gun fired through a large Gun shield gave further protection for the crew from that direction.
In November 1941, development began on an anti-aircraft version of the Type 98 with a 20 mm AA gun. During development of the AA gun tank, the Imperial Japanese Army experimented with various configurations.

Single gun variant

An earlier produced single gun prototype was designated the Type 98 Ta-Se anti-aircraft tank in November 1941. The name was taken from Taikū sensha. It was equipped with a single converted Type 98 20 mm AA machine cannon in a circumferential turret. During trials, it was determined that the chassis used for the Ta-Se was too small to be a stable "firing platform". It did not enter production.

Twin gun version

The prototype Type 98 20 mm AAG Tank was equipped with modified twin Type 2 20 mm AA machine cannon. The guns were similar to the Type 98 anti-aircraft cannon, but these could be elevated to 95 degrees and had a central fire-control system. The rate of fire was 300 rpm, and they had a maximum range of 5,500 m. The gunner sat in the seat right behind the gun. The platform allowed 360 degrees of rotation for both the gunner and the gun. A Type 100 air-cooled inline six-cylinder diesel engine was used to output 130 horsepower. Forward transmission included four stages, with one reverse speed. Type 98 Ke-Ni chassis and engine, on which the prototype was based managed a speed 42 km/h. It also did not enter production.