Turbidity current


A turbidity current is most typically an underwater current of usually rapidly moving, sediment-laden water moving down a slope; although current research indicates that water-saturated sediment may be the primary actor in the process. Turbidity currents can also occur in other fluids besides water.
Researchers from the Monterey Bay Aquarium Research Institute found that a layer of water-saturated sediment moved rapidly over the seafloor and mobilized the upper few meters of the preexisting seafloor. Plumes of sediment-laden water were observed during turbidity current events but they believe that these were secondary to the pulse of the seafloor sediment moving during the events. The belief of the researchers is that the water flow is the tail-end of the process that starts at the seafloor.
In the most typical case of oceanic turbidity currents, sediment laden waters situated over sloping ground will flow down-hill because they have a higher density than the adjacent waters. The driving force behind a turbidity current is gravity acting on the high density of the sediments temporarily suspended within a fluid. These semi-suspended solids make the average density of the sediment bearing water greater than that of the surrounding, undisturbed water.
As such currents flow, they often have a "snow-balling-effect", as they stir up the ground over which they flow, and gather even more sedimentary particles in their current. Their passage leaves the ground over which they flow scoured and eroded. Once an oceanic turbidity current reaches the calmer waters of the flatter area of the abyssal plain, the particles borne by the current settle out of the water column. The sedimentary deposit of a turbidity current is called a turbidite.
Examples of turbidity currents involving other fluid mediums besides liquid water include: avalanches, lahars, pyroclastic flows, and lava flows.
Seafloor turbidity currents are often the result of sediment-laden river outflows, and can sometimes be initiated by earthquakes, slumping and other soil disturbances. They are characterized by a well-defined advance-front, also known as the current's head, and are followed by the current's main body. In terms of the more often observed and more familiar above sea-level phenomenon, they somewhat resemble flash floods.
Turbidity currents can sometimes result from submarine seismic instability, which is common with steep underwater slopes, and especially with submarine trench slopes of convergent plate margins, continental slopes and submarine canyons of passive margins. With an increasing continental shelf slope, current velocity increases, as the velocity of the flow increases, turbulence increases, and the current draws up more sediment. The increase in sediment also adds to the density of the current, and thus its velocity even further.

Definition

Turbidity currents are traditionally defined as those sediment gravity flows in which sediment is suspended by fluid turbulence.
However, the term "turbidity current" was adopted to describe a natural phenomenon whose exact nature is often unclear. The turbulence within a turbidity current is not always the support mechanism that keeps the sediment in suspension; however it is probable that turbulence is the primary or sole grain support mechanism in dilute currents. Definitions are further complicated by an incomplete understanding of the turbulence structure within turbidity currents, and the confusion between the terms turbulent and turbid. Kneller & Buckee, 2000 define a suspension current as 'flow induced by the action of gravity upon a turbid mixture of fluid and sediment, by virtue of the density difference between the mixture and the ambient fluid'. A turbidity current is a suspension current in which the interstitial fluid is a liquid ; a pyroclastic current is one in which the interstitial fluid is gas.

Triggers

Hyperpycnal plume

When the concentration of suspended sediment at the mouth of a river is so large that the density of river water is greater than the density of sea water a particular kind of turbidity current can form called a hyperpycnal plume. The average concentration of suspended sediment for most river water that enters the ocean is much lower than the sediment concentration needed for entry as a hyperpycnal plume. Although some rivers can often have continuously high sediment load that can create a continuous hyperpycnal plume, such as the Haile River, which has an average suspended concentration of 40.5 kg/m³. The sediment concentration needed to produce a hyperpycnal plume in marine water is 35 to 45 kg/m³, depending on the water properties within the coastal zone. Most rivers produce hyperpycnal flows only during exceptional events, such as storms, floods, glacier outbursts, dam breaks, and lahar flows. In fresh water environments, such as lakes, the suspended sediment concentration needed to produce a hyperpycnal plume is quite low.

Sedimentation in reservoirs

The transport and deposition of the sediments in narrow alpine reservoirs is often caused by turbidity currents. They follow the thalweg of the lake to the deepest area near the dam, where the sediments can affect the operation of the bottom outlet and the intake structures. Controlling this sedimentation within the reservoir can be achieved by using solid and permeable obstacles with the right design.

Earthquake triggering

Turbidity currents are often triggered by tectonic disturbances of the sea floor. The displacement of continental crust in the form of fluidization and physical shaking both contribute to their formation. Earthquakes have been linked to turbidity current deposition in many settings, particularly where physiography favors preservation of the deposits and limits the other sources of turbidity current deposition. Since the famous case of breakage of submarine cables by a turbidity current following the 1929 Grand Banks earthquake, earthquake triggered turbidites have been investigated and verified along the Cascadia subduction Zone, the Northern San Andreas Fault, a number of European, Chilean and North American lakes, Japanese lacustrine and offshore regions and a variety of other settings.

Canyon-flushing

When large turbidity currents flow into canyons they may become self-sustaining, and may entrain sediment that has previously been introduced into the canyon by littoral drift, storms or smaller turbidity currents. Canyon-flushing associated with surge-type currents initiated by slope failures may produce currents whose final volume may be several times that of the portion of the slope that has failed.

Slumping

Sediment that has piled up at the top of the continental slope, particularly at the heads of submarine canyons can create turbidity current due to overloading, thus consequent slumping and sliding.

Convective sedimentation beneath river plumes

A buoyant sediment-laden river plume can induce a secondary turbidity current on the ocean floor by the process of convective sedimentation. Sediment in the initially buoyant hypopycnal flow accumulates at the base of the surface flow, so that the dense lower boundary become unstable. The resulting convective sedimentation leads to a rapid vertical transfer of material to the sloping lake or ocean bed, potentially forming a secondary turbidity current. The vertical speed of the convective plumes can be much greater than the Stokes settling velocity of an individual particle of sediment. Most examples of this process have been made in the laboratory, but possible observational evidence of a secondary turbidity current was made in Howe Sound, British Columbia, where a turbidity current was periodically observed on the delta of the Squamish River. As the vast majority of sediment laden rivers are less dense than the ocean, rivers cannot readily form plunging hyperpycnal flows. Hence convective sedimentation is an important possible initiation mechanism for turbidity currents.
's central Coast.

Effect on ocean floor

Large and fast-moving turbidity currents can incise and erode continental margins and cause damage to artificial structures such as telecommunication cables on the seafloor. Understanding where turbidity currents flow on the ocean floor can help to decrease the amount of damage to telecommunication cables by avoiding these areas or reinforcing the cables in vulnerable areas.
When turbidity currents interact with other currents, such as contour currents, they can change their direction. This ultimately shifts submarine canyons and sediment deposition locations. One example of this is located in the western part of the Gulf of Cadiz, where the Mediterranean outflow water current strongly influences turbidity currents, ultimately causing shifting of valleys and canyons in the direction of the MOW flow. This changes the erosion and depositional zones, ultimately changing the ocean floor topography.

Deposits

When the energy of a turbidity current lowers, its ability to keep suspended sediment decreases, thus sediment deposition occurs. These deposits are called turbidites. Turbidity currents are rarely seen in nature, thus turbidites can be used to determine turbidity current characteristics. Some examples: grain size can give indication of current velocity, grain lithology and the use of foraminifera for determining origins, grain distribution shows flow dynamics over time and sediment thickness indicates sediment load and longevity.
Turbidites are commonly used in the understanding of past turbidity currents, for example, the Peru-Chile Trench off Southern Central Chile contains numerous turbidite layers that were cored and analysed. From these turbidites the predicted history of turbidity currents in this area was determined, increasing the overall understanding of these currents.

Antidune deposits

Some of the largest antidunes on Earth are formed by turbidity currents. One observed sediment-wave field is located on the lower continental slope off Guyana, South America. This sediment-wave field covers an area of at least 29 000 km2 at a water depth of 4400–4825 meters. These antidunes have wavelengths of 110–2600 m and wave heights of 1–15 m. Turbidity currents responsible for wave generation are interpreted as originating from slope failures on the adjacent Venezuela, Guyana and Suriname continental margins. Simple numerical modelling has been enabled to determine turbidity current flow characteristics across the sediment waves to be estimated: internal Froude number = 0.7–1.1, flow thickness = 24–645 m, and flow velocity = 31–82 cm·s−1. Generally, on lower gradients beyond minor breaks of slope, flow thickness increases and flow velocity decreases, leading to an increase in wavelength and a decrease in height.

Reversing buoyancy

The behaviour of turbidity currents with buoyant fluid has been investigated to find that the front speed decreases more rapidly than that of currents with the same density as the ambient fluid. These turbidity currents ultimately come to a halt as sedimentation results in a reversal of buoyancy, and the current lifts off, the point of lift-off remaining constant for a constant discharge. The lofted fluid carries fine sediment with it, forming a plume that rises to a level of neutral buoyancy or to the water surface, and spreads out. Sediment falling from the plume produces a widespread fall-out deposit, termed hemiturbidite. and field observations suggest that the shape of the lobe deposit formed by a lofting plume is narrower than for a similar non-lofting plume

Prediction

of erosion by turbidity currents, and of the distribution of turbidite deposits, such as their extent, thickness and grain size distribution, requires an understanding of the mechanisms of sediment transport and deposition, which in turn depends on the fluid dynamics of the currents.
The extreme complexity of most turbidite systems and beds has promoted the development of quantitative models of turbidity current behaviour inferred solely from their deposits. Small-scale laboratory experiments therefore offer one of the best means of studying their dynamics. Mathematical models can also provide significant insights into current dynamics. In the long term, numerical techniques are most likely the best hope of understanding and predicting three-dimensional turbidity current processes and deposits. In most cases, there are more variables than governing equations, and the models rely upon simplifying assumptions in order to achieve a result. The accuracy of the individual models thus depends upon the validity and choice of the assumptions made. Experimental results provide a means of constraining some of these variables as well as providing a test for such models. Physical data from field observations, or more practical from experiments, are still required in order to test the simplifying assumptions necessary in mathematical models. Most of what is known about large natural turbidity currents is inferred from indirect sources, such as submarine cable breaks and heights of deposits above submarine valley floors. Although during the 2003 Tokachi-oki earthquake a large turbidity current was observed by the cabled observatory which provided direct observations, which is rarely achieved.

Oil exploration

Oil and gas companies are also interested in turbidity currents because the currents deposit organic matter that over geologic time gets buried, compressed and transformed into hydrocarbons. The use of numerical modelling and flumes are commonly used to help understand these questions. Much of the modelling is used to reproduce the physical processes which govern turbidity current behaviour and deposits.

Modeling approaches

Shallow-water models

The so-called depth-averaged or shallow-water models are initially introduced for compositional gravity currents
and then later extended to turbidity currents. The typical assumptions used along with the shallow-water models are: hydrostatic pressure field, clear fluid is not entrained, and particle concentration does not depend on the vertical location. Considering the ease of implementation, these models can typically predict flow characteristic such as front location or front speed in simplified geometries, e.g. rectangular channels, fairly accurately.

Depth-resolved models

With the increase in computational power, depth-resolved models have become a powerful tool to study gravity and turbidity currents. These models, in general, are mainly focused on the solution of the Navier-Stokes equations for the fluid phase.
With dilute suspension of particles, a Eulerian approach proved to be accurate to describe the evolution of particles in terms of a continuum particle concentration field. Under these models, no such assumptions as shallow-water models are needed and, therefore, accurate calculations and measurements are performed to study these currents. Measurements such as, pressure field, energy budgets, vertical particle concentration and accurate deposit heights are a few to mention. Both Direct numerical simulation and Turbulence modeling are used to model these currents.

Examples of turbidity currents