Tungsten hexafluoride


Tungsten fluoride, also known as tungsten hexafluoride, is an inorganic compound with the formula WF6. It is a toxic, corrosive, colorless gas, with a density of about 13 g/L It is one of the densest known gases under standard conditions. WF6 is commonly used by the semiconductor industry to form tungsten films, through the process of chemical vapor deposition. This layer serves as a low-resistivity metallic "interconnect". It is one of seventeen known binary hexafluorides.

Properties

The WF6 molecule is octahedral with the symmetry point group of Oh. The W–F bond distances are 183.2 pm. Between 2.3 and 17 °C, tungsten hexafluoride condenses into a pale yellow liquid having the density of 3.44 g/cm3 at 15 °C. At 2.3 °C it freezes into a white solid having a cubic crystalline structure, the lattice constant of 628 pm and calculated density 3.99 g/cm3. At −9 °C this structure transforms into an orthorhombic solid with the lattice constants of a = 960.3 pm, b = 871.3 pm, and c = 504.4 pm, and the density of 4.56 g/cm3. In this phase, the W–F distance is 181 pm, and the mean closest intermolecular contacts are 312 pm. Whereas WF6 gas is one of the densest gases, with the density exceeding that of the heaviest elemental gas radon, the density of WF6 in the liquid and solid state is rather moderate.
The vapor pressure of WF6 between −70 °C and 17 °C can be described by the equation
where the P = vapor pressure, T = temperature.

Synthesis

Tungsten hexafluoride is commonly produced by the exothermic reaction of fluorine gas with tungsten powder at a temperature between 350 and 400 °C:
The gaseous product is separated from WOF4, a common impurity, by distillation. In a variation on the direct fluorination, the metal is placed in a heated reactor, slightly pressurized to, with a constant flow of WF6 infused with a small amount of fluorine gas.
The fluorine gas in the above method can be substituted by ClF, ClF3 or BrF3. An alternative procedure for producing tungsten fluoride is to react tungsten trioxide with HF, BrF3 or SF4. Tungsten fluoride can also be obtained by conversion of tungsten hexachloride:

Reactions

On contact with water, tungsten hexafluoride gives hydrogen fluoride and tungsten oxyfluorides, eventually forming tungsten trioxide:
Unlike some other metal fluorides, WF6 is not a useful fluorinating agent nor is it a powerful oxidant. It can be reduced to the yellow WF4.

Applications in semiconductor industry

The dominant application of tungsten fluoride is in semiconductor industry, where it is widely used for depositing tungsten metal in a chemical vapor deposition process. The expansion of the industry in the 1980s and 1990s resulted in the increase of WF6 consumption, which remains at around 200 tonnes per year worldwide. Tungsten metal is attractive because of its relatively high thermal and chemical stability, as well as low resistivity and electromigration. WF6 is favored over related compounds, such as WCl6 or WBr6, because of its higher vapor pressure resulting in higher deposition rates. Since 1967, two WF6 deposition routes have been developed and employed, thermal decomposition and hydrogen reduction. The required WF6 gas purity is rather high and varies between 99.98% and 99.9995% depending on the application.
WF6 molecules have to be split up in the CVD process. The decomposition is usually facilitated by mixing WF6 with hydrogen, silane, germane, diborane, phosphine, and related hydrogen-containing gases.

Silicon

WF6 reacts upon contact with a silicon substrate. The WF6 decomposition on silicon is temperature-dependent:
This dependence is crucial, as twice as much silicon is being consumed at higher temperatures. The deposition occurs selectively on pure Si only, but not on silicon oxide or nitride, thus the reaction is highly sensitive to contamination or substrate pre-treatment. The decomposition reaction is fast, but saturates when the tungsten layer thickness reaches 10–15 micrometers. The saturation occurs because the tungsten layer stops diffusion of WF6 molecules to the Si substrate which is the only catalyst of molecular decomposition in this process.
If the deposition occurs not in an inert but in an oxygen containing atmosphere then instead of tungsten, a tungsten oxide layer is produced.

Hydrogen

The deposition process occurs at temperatures between 300 and 800 °C and results in formation of hydrofluoric acid vapors:
The crystallinity of the produced tungsten layers can be controlled by altering the WF6/H2 ratio and the substrate temperature: low ratios and temperatures result in oriented tungsten crystallites whereas higher values favor the orientation. Formation of HF is a drawback, as the HF vapor is very aggressive and etches away most materials. Also, the deposited tungsten shows poor adhesion to the silicon dioxide which is the main passivation material in semiconductor electronics. Therefore, SiO2 has to be covered with an extra buffer layer prior to the tungsten deposition. On the other hand, etching by HF may be beneficial to remove unwanted impurity layers.

Silane and germane

The characteristic features of tungsten deposition from the WF6/SiH4 are high speed, good adhesion and layer smoothness. The drawbacks are explosion hazard and high sensitivity of the deposition rate and morphology to the process parameters, such as mixing ratio, substrate temperature, etc. Therefore, silane is commonly used to create a thin tungsten nucleation layer. It is then switched to hydrogen, that slows down the deposition and cleans up the layer.
Deposition from WF6/GeH4 mixture is similar to that of WF6/SiH4, but the tungsten layer becomes contaminated with relatively heavy germanium up to concentrations of 10–15%. This increases tungsten resistance from about 5 to 200 µΩ·cm.

Other applications

WF6 can be used for the production of tungsten carbide.
As a heavy gas, WF6 can be used as a buffer to control gas reactions. For example, it slows down the chemistry of the Ar/O2/H2 flame and reduces the flame temperature.

Safety

Tungsten hexafluoride is an extremely corrosive compound that attacks any tissue. Because of the formation of hydrofluoric acid upon reaction of WF6 with humidity, WF6 storage vessels have Teflon gaskets.

Related compounds

s are known with other metals and metalloids. Such MF6 compounds characteristically form dense gases, however, when element M is heavier than tungsten, the compound is either liquid or solid at room temperature.