Tube (fluid conveyance)


A tube, or tubing, is a long hollow cylinder used for moving fluids or to protect electrical or optical cables and wires.
The terms "pipe" and "tube" are almost interchangeable, although minor distinctions exist — generally, a tube has tighter engineering requirements than a pipe. Both pipe and tube imply a level of rigidity and permanence, whereas a hose is usually portable and flexible. A tube and pipe may be specified by standard pipe size designations, e.g., nominal pipe size, or by nominal outside or inside diameter and/or wall thickness. The actual dimensions of pipe are usually not the nominal dimensions: A 1-inch pipe will not actually measure 1 inch in either outside or inside diameter, whereas many types of tubing are specified by actual inside diameter, outside diameter, or wall thickness.

Manufacture

There are three classes of manufactured tubing: seamless, as-welded or electric resistant welded, and drawn-over-mandrel.
There are many industry and government standards for pipe and tubing. Many standards exist for tube manufacture; some of the most common are as follows:
ASTM material specifications generally cover a variety of grades or types that indicate a specific material composition. Some of the most commonly used are:
In installations using hydrogen, copper and stainless steel tubing must be factory pre-cleaned and/or certified as instrument grade. This is due to hydrogen's particular propensities: to explode in the presence of oxygen, oxygenation sources, or contaminants; to leak due to its atomic size; and to cause embrittlement of metals, particularly under pressure.

Calculation of strength

For a tube of silicone rubber with a tensile strength of 10 MPa and an 8 mm outside diameter and 2 mm thick walls. The maximum pressure may be calculated as follows:
Gives bursting pressure of 5 MPa.
Using a safety factor:
33