Through-silicon via


In electronic engineering, a through-silicon via or through-chip via is a vertical electrical connection that passes completely through a silicon wafer or die. TSVs are high-performance interconnect techniques used as an alternative to wire-bond and flip chips to create 3D packages and 3D integrated circuits. Compared to alternatives such as package-on-package, the interconnect and device density is substantially higher, and the length of the connections becomes shorter.

Classification

Dictated by the manufacturing process, there exist three different types of TSVs: via-first TSVs are fabricated before the individual devices are patterned, via-middle TSVs are fabricated after the individual devices are patterned but before the metal layers, and via-last TSVs are fabricated after the BEOL process. Via-middle TSVs are currently a popular option for advanced 3D ICs as well as for interposer stacks.
TSVs through the front end of line have to be carefully accounted for during the EDA and manufacturing phases. That is because TSVs induce thermo-mechanical stress in the FEOL layer, thereby impacting the transistor behaviour.

Applications

Image sensors

s were among the first applications to adopt TSV in volume manufacturing. In initial CIS applications, TSVs were formed on the backside of the image sensor wafer to form interconnects, eliminate wire bonds, and allow for reduced form factor and higher-density interconnects. Chip stacking came about only with the advent of backside illuminated CIS, and involved reversing the order of the lens, circuitry, and photodiode from traditional front-side illumination so that the light coming through the lens first hits the photodiode and then the circuitry. This was accomplished by flipping the photodiode wafer, thinning the backside, and then bonding it on top of the readout layer using a direct oxide bond, with TSVs as interconnects around the perimeter.

3D packages

A 3D package contains two or more chips stacked vertically so that they occupy less space and/or have greater connectivity. An alternate type of 3D package can be found in IBM's Silicon Carrier Packaging Technology, where ICs are not stacked but a carrier substrate containing TSVs is used to connect multiple ICs together in a package. In most 3D packages, the stacked chips are wired together along their edges; this edge wiring slightly increases the length and width of the package and usually requires an extra “interposer” layer between the chips. In some new 3D packages, TSVs replace edge wiring by creating vertical connections through the body of the chips. The resulting package has no added length or width. Because no interposer is required, a TSV 3D package can also be flatter than an edge-wired 3D package. This TSV technique is sometimes also referred to as TSS.

3D integrated circuits

A 3D integrated circuit is a single integrated circuit built by stacking silicon wafers and/or dies and interconnecting them vertically so that they behave as a single device. By using TSV technology, 3D ICs can pack a great deal of functionality into a small “footprint.” The different devices in the stack may be heterogeneous, e.g. combining CMOS logic, DRAM and III-V materials into a single IC. In addition, critical electrical paths through the device can be drastically shortened, leading to faster operation. The Wide I/O 3D DRAM memory standard includes TSV in the design.

History

The origins of the TSV concept can be traced back to William Shockley's patent "Semiconductive Wafer and Method of Making the Same" filed in 1958 and granted in 1962, which was further developed by IBM researchers Merlin Smith and Emanuel Stern with their patent "Methods of Making Thru-Connections in Semiconductor Wafers" filed in 1964 and granted in 1967, the latter describing a method for etching a hole through silicon. TSV was not originally designed for 3D integration, but the first 3D chips based on TSV were invented later in the 1980s.
The first three-dimensional integrated circuit stacked chips fabricated with a TSV process were invented in 1980s Japan. Hitachi filed a Japanese patent in 1983, followed by Fujitsu in 1984. In 1986, Fujitsu filed a Japanese patent describing a stacked chip structure using TSV. In 1989, Mitsumasa Koyonagi of Tohoku University pioneered the technique of wafer-to-wafer bonding with TSV, which he used to fabricate a 3D LSI chip in 1989. In 1999, the Association of Super-Advanced Electronics Technologies in Japan began funding the development of 3D IC chips using TSV technology, called the "R&D on High Density Electronic System Integration Technology" project. The Koyanagi Group at Tohoku University used TSV technology to fabricate a three-layer stacked image sensor chip in 1999, a three-layer memory chip in 2000, a three-layer artificial retina chip in 2001, a three-layer microprocessor in 2002, and a ten-layer memory chip in 2005.
The inter-chip via method was developed in 1997 by a FraunhoferSiemens research team including Peter Ramm, D. Bollmann, R. Braun, R. Buchner, U. Cao-Minh, Manfred Engelhardt and Armin Klumpp. It was a variation of the TSV process, and was later called SLID technology.
The term "through-silicon via" was coined by Tru-Si Technologies researchers Sergey Savastiouk, O. Siniaguine, and E. Korczynski, who proposed a TSV method for a 3D wafer-level packaging solution in 2000. Savastiouk later became the co-founder and CEO of Inc. From the beginning, his vision of the business plan was to create a through silicon interconnect since these would offer significant performance improvements over wire bonds. Savastiouk published two articles on the topic in Solid State Technology, first in January 2000 and again in 2010. The first article “Moore’s Law – The Z Dimension” was published in Solid State Technology magazine in January 2000. This article outlined the roadmap of the TSV development as a transition from 2D chip stacking to wafer level stacking in the future. In one of the sections titled Through Silicon Vias, Dr. Sergey Savastiouk wrote, “Investment in technologies that provide both wafer-level vertical miniaturization and preparation for vertical integration makes good sense.” He continued, “By removing the arbitrary 2D conceptual barrier associated with Moore’s Law, we can open up a new dimension in ease of design, test, and manufacturing of IC packages. When we need it the most – for portable computing, memory cards, smart cards, cellular phones, and other uses – we can follow Moore’s Law into the Z dimension.” This was the first time the term "through-silicon via" was used in a technical publication.
CMOS image sensors utilising TSV were commercialized by companies including Toshiba, Aptina and STMicroelectronics during 20072008, with Toshiba naming their technology "Through Chip Via". 3D-stacked random-access memory was commercialized by Elpida Memory, which developed the first 8GB DRAM chip in September 2009, and released it in June 2011. TSMC announced plans for 3D IC production with TSV technology in January 2010. In 2011, SK Hynix introduced 16GB DDR3 SDRAM using TSV technology, Samsung Electronics introduced 3D-stacked 32GB DDR3 based on TSV in September, and then Samsung and Micron Technology announced TSV-based Hybrid Memory Cube technology in October. SK Hynix manufactured the first High Bandwidth Memory chip, based on TSV technology, in 2013.