Telnet


Telnet is an application protocol used on the Internet or local area network to provide a bidirectional interactive text-oriented communication facility using a virtual terminal connection. User data is interspersed in-band with Telnet control information in an 8-bit byte oriented data connection over the Transmission Control Protocol.
Telnet was developed in 1969 beginning with RFC 15, extended in RFC 855, and standardized as Internet Engineering Task Force Internet Standard STD 8, one of the first Internet standards. The name stands for "teletype network".
Historically, Telnet provided access to a command-line interface on a remote host. However, because of serious security concerns when using Telnet over an open network such as the Internet, its use for this purpose has waned significantly in favor of SSH.
The term telnet is also used to refer to the software that implements the client part of the protocol. Telnet client applications are available for virtually all computer platforms. Telnet is also used as a verb. To telnet means to establish a connection using the Telnet protocol, either with a command line client or with a graphical interface. For example, a common directive might be: "To change your password, telnet into the server, log in and run the passwd command." In most cases, a user would be telnetting into a Unix-like server system or a network device.

History and standards

Telnet is a client-server protocol, based on a reliable connection-oriented transport. Typically, this protocol is used to establish a connection to Transmission Control Protocol port number 23, where a Telnet server application is listening. Telnet, however, predates TCP/IP and was originally run over Network Control Program protocols.
Even though Telnet was an ad hoc protocol with no official definition until March 5, 1973, the name actually referred to Teletype Over Network Protocol as the RFC 206 on Telnet makes the connection clear:
Essentially, it used an 8-bit channel to exchange 7-bit ASCII data. Any byte with the high bit set was a special Telnet character. On March 5, 1973, a Telnet protocol standard was defined at UCLA with the publication of two NIC documents: Telnet Protocol Specification, NIC 15372, and Telnet Option Specifications, NIC 15373.
Many extensions were made for Telnet because of its negotiable options protocol architecture. Some of these extensions have been adopted as Internet standards, IETF documents STD 27 through STD 32. Some extensions have been widely implemented and others are proposed standards on the IETF standards track
Telnet is best understood in the context of a user with a simple terminal using the local Telnet program to run a logon session on a remote computer where the user's communications needs are handled by a Telnet server program.

Security

When Telnet was initially developed in 1969, most users of networked computers were in the computer departments of academic institutions, or at large private and government research facilities. In this environment, security was not nearly as much a concern as it became after the bandwidth explosion of the 1990s. The rise in the number of people with access to the Internet, and by extension the number of people attempting to hack other people's servers, made encrypted alternatives necessary.
Experts in computer security, such as SANS Institute, recommend that the use of Telnet for remote logins should be discontinued under all normal circumstances, for the following reasons:
These security-related shortcomings have seen the usage of the Telnet protocol drop rapidly, especially on the public Internet, in favor of the Secure Shell protocol, first released in 1995. SSH has practically replaced Telnet, and the older protocol is used these days only in rare cases to access decades old legacy equipment that does not support more modern protocols. SSH provides much of the functionality of telnet, with the addition of strong encryption to prevent sensitive data such as passwords from being intercepted, and public key authentication, to ensure that the remote computer is actually who it claims to be. As has happened with other early Internet protocols, extensions to the Telnet protocol provide Transport Layer Security security and Simple Authentication and Security Layer authentication that address the above concerns. However, most Telnet implementations do not support these extensions; and there has been relatively little interest in implementing these as SSH is adequate for most purposes.
It is of note that there are a large number of industrial and scientific devices which have only Telnet available as a communication option. Some are built with only a standard RS-232 port and use a serial server hardware appliance to provide the translation between the TCP/Telnet data and the RS-232 serial data. In such cases, SSH is not an option unless the interface appliance can be configured for SSH.
Telnet is still used by hobbyists, especially among Amateur radio operators. The Winlink protocol supports packet radio via a Telnet connection.

Telnet 5250

IBM 5250 or 3270 workstation emulation is supported via custom telnet clients, TN5250/TN3270, and IBM servers. Clients and servers designed to pass IBM 5250 data streams over Telnet generally do support SSL encryption, as SSH does not include 5250 emulation. Under OS/400, port 992 is the default port for secured telnet.

Telnet data

All data octets except 0xff are transmitted over Telnet as is.
Some use Telnet client applications to establish an interactive TCP session to a port other than the Telnet server port. Connections to such ports do not use IAC and all octets are sent to the server without interpretation. For example, a user could make an HTTP request by hand by using a command line version of the telnet client to a web server on TCP port 80 as follows:

$ telnet www.example.com 80
GET /path/to/file.html HTTP/1.1
Host: www.example.com
Connection: close

However such services are implemented through network virtual terminal rules and Telnet does not handle some of the other NVT requirements, such as the requirement for a bare carriage return character to be followed by a NUL character.
There are other TCP terminal clients, such as netcat or socat on UNIX and PuTTY on Windows, which handle such requirements. Nevertheless, Telnet may still be used in debugging network services such as SMTP, IRC, HTTP, FTP or POP3, to issue commands to a server and examine the responses.
Another difference between Telnet and other TCP terminal clients is that Telnet is not 8-bit clean by default. 8-bit mode may be negotiated, but octets with the high bit set may be garbled until this mode is requested, as 7 bit is the default mode. The 8-bit mode is intended to transmit binary data, not ASCII characters. The standard suggests the interpretation of codes 0000–0176 as ASCII, but does not offer any meaning for high-bit-set data octets. There was an attempt to introduce a switchable character encoding support like HTTP has, but nothing is known about its actual software support.

Related RFCs

Internet Standards