Subscriber loop carrier


A subscriber loop carrier or subscriber line carrier provides telephone exchange-like telephone interface functionality. An SLC remote terminal is typically located in an area with a high density of telephone subscribers, such as a residential neighborhood, that is remote from the telephone company's central office. Two or four T1 circuits connect the SLC remote terminal to the central office terminal, in the case of a universal subscriber loop carrier. An integrated subscriber loop carrier has its T-spans terminating directly in time division switching equipment in the telephone exchange.
One system serves up to 96 customers. This configuration is more efficient than the alternative of having separate copper pairs between each service termination point and the central telephone exchange.
These systems are generally installed in cabinets that have some form of uninterruptible power supply or other backup battery arrangements, and sometimes with additional equipment such as remote DSLAMs.

Reliability

SLCs have been criticized for reducing the reliability of local loops due to their increased reliance on utility power. Historically, all line power was provided by the CO and was backed up by battery power and, for longer power outages, diesel generators housed right at the office. However, telephone companies have increasingly been using SLCs. SLCs are notorious for poorly functioning or short-lived battery backup systems, some lasting as little as four hours. Many do not have on-site standby generators which requires the telephone company to bring out a portable generator before the batteries run out. This may not happen in time if there are flooded streets, snow filled roads, or downed trees causing outages for anyone served by that unit. Often, the air conditioning units, sump pumps, and even lights are not backed up in those units, which can cause equipment overheating and flooding issues.