Submarine navigation


Submarine navigation underwater requires special skills and technologies not needed by surface ships. The challenges of underwater navigation have become more important as submarines spend more time underwater, travelling greater distances and at higher speed. Military submarines travel underwater in an environment of total darkness with neither windows nor lights. Operating in stealth mode, they cannot use their active sonar systems to ping ahead for underwater hazards such as undersea mountains, drilling rigs or other submarines. Surfacing to obtain navigational fixes is precluded by pervasive anti-submarine warfare detection systems such as radar and satellite surveillance. Antenna masts and antenna-equipped periscopes can be raised to obtain navigational signals but in areas of heavy surveillance, only for a few seconds or minutes; current radar technology can detect even a slender periscope while submarine shadows may be plainly visible from the air.

Navigational technologies

Surfaced submarines entering and leaving port navigate similarly to traditional ships but with a few extra considerations because most of the ship rides below the waterline, making them hard for other ships to see and identify.
Submarines carry an inertial navigation system, which measures the boat’s motion and constantly updates position. Because it does not rely on radio signals or celestial sightings, it allows the boat to navigate while remaining hidden under the surface. To maintain accuracy, the submarine must periodically update its position using outside navigational radio signals. From the 1960s to the 1990s, Transit satellites and LORAN shore stations provided those signals. GPS has now replaced both.

Surface and near-surface navigation

On the surface or at periscope depth, submarines have used these methods to fix their position:
At depths below periscope depth submarines determine their position using: