Straumann


Headquartered in Basel, Switzerland, the Straumann Group researches and develops, manufactures and supplies dental implants, instruments, biomaterials, CADCAM prosthetics, digital equipment, software, and clear aligners for applications in replacement, restorative, orthodontic and preventative dentistry.
The Straumann Group also offers services to the dental profession worldwide, including training and education, which is provided in collaboration with the International Team for Implantology and the Instituto Latino Americano de Pesquisa e Ensino Odontológico.
Altogether, the Straumann Group employs approximately 6,000 people worldwide and its products and services are available in more than 100 countries through a broad network of distribution subsidiaries and partners.

History

The history of the Straumann Group has three distinct eras and spans more than half a century. It began in the Swiss village of Waldenburg in 1954 with the foundation of a research institute bearing the name of its founder, Dr Ing. Reinhard Straumann.

1954–1970

Between 1954 and 1970, the company specialized in alloys used in timing instruments and in materials testing. Among Straumann's renowned inventions in this period were special alloys that are still used in watch springs today. A breakthrough in the use of non-corroding alloys for treating bone fractures prompted Dr Fritz Straumann to enter the fields of orthopedics and dental implantology, which began the second phase of the company's history.
1954
In the small town of Waldenburg, at the foot of the Swiss Jura, Reinhard Straumann founds the "Dr Ing. R. Straumann Research Institute AG".
1960
The Swiss Association for the Study of Internal Fixation is looking for a company that is capable of providing materials for internal fixation implants - Dr H.C. Fritz Straumann, son of the company's founder, gets in touch.

1970–1990

Between 1970 and 1990, Straumann became a leading manufacturer of osteosynthesis implants. A management buy-out of the osteosynthesis division in 1990 led to the creation of Stratec as a separate company. 1990 thus marked the beginning of the Straumann Group as it is known today. Thomas Straumann, grandson of the founder, headed the remaining part of the firm, which employed just 25 people focused exclusively on dental implants.
Another major milestone in the company's history was in 1980 when Straumann established a partnership with the International Team for Implantology. The 1980s also marked the company's geographic expansion, with subsidiaries in Germany and the US. The following are examples of achievements:
1974
The first dental implants are developed at the Institut Straumann and undergo successful clinical testing at the University of Berne.
1980
Under the aegis of Dr Fritz Straumann, Waldenburg, and Prof Schroeder, University of Berne, the International Team for Implantology, the ITI, is founded.
1990
After a management buy-out of the internal fixation division, Thomas Straumann focuses the activities of the Institut Straumann AG on the area of implant dentistry.

1998–present

In 1998, Straumann Holding AG became a publicly traded company on the Swiss exchange. Through the acquisition of Kuros Therapeutics and Biora, Straumann entered the promising field of oral tissue regeneration.
1998
The Straumann Holding AG goes public and is listed on the Swiss stock exchange.
2000
With the opening of the production site in Villeret, located in the Berne Jura, and the Technology Center in Waldenburg, new dimensions open up for the international Straumann group.
2002
Straumann acquires Kuros Therapeutics AG and extends its activities into the field of biomaterials.
2003
Straumann acquires the Swedish company Biora, a pioneer in the area of biologically based regeneration of dental tissue.
2004
Straumann moves into its new headquarters in Basel.
2011
Investment in Dental Wings, a developer and provider of CADCAM software and scanning technology, based in Canada.
2012
Straumann acquires Neodent from Brazil and extends its activities into the value Market.
2013
Straumann invests in Medentika and Createch – both companies are active in prosthetics.
2016
Straumann acquires Equinox, in the fast-growing value segment in India.
The company also invests in the French implant maker Anthogyr to address the non-premium segment in China.
2017
Straumann took a controlling interest in Medentika.
2018
Straumann invests in botiss biomedical and fully acquires Createch. The Group also gains control of T-Plus in Taiwan.
Additionally, the Straumann Group entered the orthodontics field and strengthened its digital capabilities through acquisitions and alliances: full acquisition of Dental Wings; acquisition of ClearCorrect ; investment in Geniova ; investment in Rapid Shape ; increased investment in Rodo Medical; acquisition of Loop Digital Solutions; partnership with 3Shape.
2019
The Group takes over French implant manufacturer Anthogyr.

Organization

Board of Directors

The Group's principal production sites for implant components and instruments are in Brazil, Germany, India, Switzerland and the US, while CADCAM prosthetics are milled in Brazil, China, Germany, Japan and the US. Biomaterials are produced in Sweden, digital equipment in Canada and Germany, and clear aligners in the US.

Villeret (Switzerland)

All major components of the Straumann Dental Implant System are currently manufactured at Straumann's factory in Villeret, Switzerland.
Villeret became operational in 2000. Continued global volume growth made it necessary to expand capacity, and a second production floor was fitted out in 2005. As a result, Villeret now operates two fully independent production lines, one producing surgical products and the other manufacturing components for the range of implant prosthetics. Villeret also houses the manufacturing unit for Straumann's third generation implant surface technology SLActive.

Andover (USA)

The North American headquarters in Andover house Straumann's first manufacturing unit outside Switzerland and produces implant system components and instruments.
The 7,400-square-meter production area complements Straumann's current production unit in Villeret, Switzerland. It is also the home office location for Neodent, the Brazilian value implant Straumann acquired in 2013 as part of its product portfolio.

Curitiba (Brazil)

Headquarters and production facility of the Neodent non-premium portfolio.

Malmö (Sweden)

Straumann's production unit in Malmö is devoted primarily to the specialized manufacture of regenerative products.
In June 2003 Straumann acquired the Swedish company Biora, which specialized in the manufacture of the protein-based products for tissue regeneration. The manufacture of Emdogain, a protein based gel for use in periodontal disease, is focused in Malmö.

Montreal (Canada)

Dental Wings headquarters and digital equipment production facility

Round Rock (USA)

ClearCorrect headquarters and clear aligners production facility

CADCAM facilities

The sites in Markkleeberg, Arlington, Narita and Shenzhen host Straumann's centralized CADCAM facilities for tooth restoration prosthetics.