Spin crossover


Spin Crossover is a phenomenon that occurs in some metal complexes wherein the spin state of the complex changes due to an external stimulus. The stimulus include temperature, pressure, Spin crossover is sometimes referred to as spin transition or spin equilibrium behavior. The change in spin state usually involves interchange of low spin and high spin configuration.
and C) two-step transition.
Spin crossover is commonly observed with first row transition metal complexes with a d4 through d7 electron configuration in an octahedral ligand geometry. Spin transition curves typically plot the high-spin molar fraction vs. T. Often a gradual spin transition is followed by an abrupt transition with hysteresis and a two-step transition. The abruptness with hysteresis indicates cooperativity, or “communication”, between neighboring metal complexes. In the latter case, the material is bistable and can exist in the two different spin states with a different range of external stimuli for the two phenomena, namely LS → HS and HS → LS. The two-step transition is relatively rare but is observed, for example, with dinuclear SCO complexes for which the spin transition in one metal center renders the transition in the second metal center less favorable. Several types of spin crossover have been identified; some of them are light induced excited spin-state trapping, ligand-driven light induced spin change, and charge transfer induced spin transition.

History

SCO was first observed in 1931 by Cambi et al. who discovered anomalous magnetic behavior for the tris complexes. The spin states of these complexes were sensitive to the nature of the amine substituents. In the 1960s, the first CoII SCO complex was reported. Magnetic measurements and Mössbauer spectroscopic studies established the nature of the spin transition in iron SCO complexes. Building on those early studies, there is now interest in applications of SCO in electronic and optical displays.

Characterization tools

Due to the changes in magnetic properties that occur from a spin transition - the complex being less magnetic in a LS state and more magnetic in a HS state - magnetic susceptibility measurements are key to characterization of spin crossover compounds. The magnetic susceptibility as a function of temperature, is the principal technique used to characterize SCO complexes. 57Fe Mössbauer Spectroscopy is another technique employed to characterize SCO in iron complexes, especially since this technique is sensitive to magnetism.
plot showing a spin transition at about 180 K.
Another very useful technique for characterizing SCO complexes is 57Fe Mössbauer Spectroscopy. When spectra are recorded as a function of temperature, the areas under the curves of the absorption peaks are proportional to the fraction of HS and LS states in the sample.
SCO induces changes in metal-to-ligand bond distances due to the population or depopulation of the eg orbitals that have a slight antibonding character. Consequently X-ray crystallography above and below transition temperatures will generally reveal changes in metal-ligand bond lengths. Transitions from a HS to a LS state cause a decrease in and a strengthening of the metal-ligand bond. These changes are also manifested in FT-IR and Raman spectra.
The spin crossover phenomenon is very sensitive to grinding, milling and pressure, but Raman spectroscopy has the advantage that the sample does not require further preparation, in contrast to Fourier Transform Infrared spectroscopy, FT-IR, techniques; highly colored samples may affect the measurements however. Raman spectroscopy is also advantageous because it allows perturbation of the sample with external stimuli to induce SCO. Thermally induced spin crossover is due to the higher electronic degeneracies of the LS form and lower vibrational frequencies of the HS form, thus increasing the entropy. The Raman spectrum of an iron complex in the HS and LS state, emphasizing the changes in the M-L vibrational modes, where a shift from 2114 cm−1 to 2070 cm−1 corresponds to changes in the stretching vibrational modes of the thiocyanate ligand from a LS state to a HS state, respectively.
File:SpinCrossoverFig6.jpg|thumb|left|alt=Full-length|IR absorption of the CN stretching vibration of H2O at different temperatures in the cooling mode and heating mode. Figure modified from Reedijk et al.
File:SpinCrossoverFig7ver2.jpg|thumb|right|alt=Full-length|This adapted figure shows the fraction of the HS centers,, as a function of temperature as calculated from the absorption of the CN stretching vibrations of •H2O. This plot shows a relatively large hysteresis.
File:SpinCrossoverFig9ver2.jpg|thumb|right|alt=Full-length|These adapted spectra are variable temperature single crystal absorption spectra of a) Cl2•EtOH.
SCO behavior can be followed with UV-vis spectroscopy. In some cases, the absorption bands obscured due to the high intensity absorption bands caused by the Metal-to-Ligand Charge Transfer absorption bands.

Perturbation methods

Thermal Perturbation

Thermal perturbations are the most common type of external stimulus used to induce SCO. One example is 32 trigonal bipyramid, with the FeII centers in the equatorial positions. The HS FeII remains under 20% i the range of 4.2 K to 50 K, but at room temperature about two-thirds of the FeII ions in the sample are HS, as shown by the absorption band at 2.1 mm/s, while the other third of the ions remain in the LS state.

Pressure Perturbation

SCO is also influenced by the application of pressure, which changes the population of the HS and LS states. Upon application of pressure, a conversion from the HS state to the LS state and a shift from T1/2,, to higher temperatures will occur. This effect results from an increase in the zero point energy difference, ΔE°HL, caused by an increase in the relative vertical displacement of the potential wells and a decrease in the activation energy, ΔW°HL, which favors the LS state. The complex Fe22 exhibits this effect. At high pressures the LS state predominates and the transition temperature increases. At high pressures the compound is almost entirely transformed to the LS state at room temperature. As a result of the application of pressure on the Fe22 compound, the bond lengths are affected. The difference in M-L bond lengths in both HS and LS states changes the entropy of the system. The change in spin transition temperature, T1/2 and pressure obeys the Clausius-Clapeyron relationship:
'
The increase in pressure will decrease the volume of the unit cell of the Fe22 and increase the T1/2 of the system. A linear relationship between T1/2 and pressure for Fe22, where the slope of the line is '.

Light Perturbation

In Light Induced Excited Spin State Trapping, the HS-LS transition is triggered by irradiating the sample. At low temperatures it is possible to trap compounds in the HS state - a phenomenon known as the LIESST effect. The compound can be converted back to a LS state by irradiation with a photon of different energy. Irradiation of d-d transitions of the LS metal complex or MLCT absorption bands leads to population of HS states. A good example to illustrate the LIESST effect is the complex 2. The sample was irradiated with green light at temperatures below 50 K. By doing this, a spin allowed transition is promoted which is 1A1 → 1T1. However, the 1T1 excited state has a very short lifetime, decreasing the probability for the excited state to relax via a double intersystem crossing to reach the 5T2 HS state. Since the HS state is spin forbidden the lifetime for this state is long, therefore it can be trapped at low temperatures.
Due to the aim to design photoswitchable materials that have higher working temperatures than those reported to date, along with long-lifetime photoexcited states, another strategy for SCO called Ligand-Driven Light Induced Spin Change has been studied. This method consists of using a ligand that is photosensitive in order to trigger the spin interconversion of the metal ion and exciting this ligand with light. The LD-LISC effect is followed by a structural change of the photoresponsive ligands in contrast to the SCO process where the structures of the ligands are essentially unaffected. The driving force behind the metal ion SCO in this photochemical transformation is cis-trans photoisomerization. The prerequisite for LD-LISC to be observed is that the two complexes formed with the ligand photoisomers, must exhibit different magnetic behaviors as a function of temperature. Upon successive irradiations of the system at two different wavelengths within a temperature range where the metal ion can either be LS or HS, a spin-state interconversion should occur. In order to achieve this, it is convenient to design a metal environment to where at least one of the complexes exhibits a thermally induced SCO. The LD-LISC has been observed in several iron and iron complexes.

Applications

The SCO phenomenon has potential uses as switches, data storage devices, and optical displays. These potential applications would exploit the bistability which leads to changes in the colour and magnetism of samples. Molecular switches, like electrical switches, require a mechanism that for turning ON and OFF, as is achieved with the abrupt spin transitions with hysteresis. In order for the size of data storage devices to be reduced while the capacity of them increase, smaller units that exhibit a bistability and thermal hysteresis are required. One research goal is to develop new materials where the SCO response time can be decreased from nanoseconds, as we know it, to femtoseconds. One of the advantages of SCO phenomena is the absence of fatigue, because there is an intraelectronic transition instead of an electron displacement through space.

Additional reading