Sound power or acoustic power is the rate at which sound energy is emitted, reflected, transmitted or received, per unit time. It is defined as "through a surface, the product of the sound pressure, and the component of the particle velocity, at a point on the surface in the direction normal to the surface, integrated over that surface." The SI unit of sound power is the watt. It relates to the power of the sound force on a surface enclosing a sound source, in air. For a sound source, unlike sound pressure, sound power is neither room-dependent nor distance-dependent. Sound pressure is a property ofthe field at a point in space, while sound power is a property of a sound source, equal to the total power emitted by that source in all directions. Sound power passing through an area is sometimes called sound flux or acoustic flux through that area.
Regulations often specify a method for measurement that integrates sound pressure over a surface enclosing the source. LWA specifies the power delivered to that surface in decibels relative to one picowatt. Devices often have labeling requirements and maximum amounts they are allowed to produce. The A-weighting scale is used in the calculation as the metric is concerned with the loudness as perceived by the human ear. Measurements in accordance with ISO 3744 are taken at 6 to 12 defined points around the device in a hemi-anechoic space. The test environment can be located indoors or outdoors. The required environment is on hard ground in a large open space or hemi-anechoic chamber
Table of selected sound sources
Here is a table of some examples, from an on-line source. For omnidirectional sources in free space, sound power in LwA is equal to sound pressure level in dB above 20 micropascals at a distance of 0.2821 m
θ is the angle between the direction of propagation of the sound and the normal to the surface.
p is the sound pressure.
For example, a sound at SPL = 85 dB or p = 0.356 Pa in air through a surface of area A = normal to the direction of propagation has a sound energy fluxP =. This is the parameter one would be interested in when converting noise back into usable energy, along with any losses in the capturing device.
Sound power level or acoustic power level is a logarithmic measure of the power of a sound relative to a reference value. Sound power level, denoted LW and measured in dB, is defined by where
The commonly used reference sound power in air is The proper notations for sound power level using this reference are or, but the suffix notations,, dBSWL, or dBSWL are very common, even if they are not accepted by the SI. The reference sound power P0 is defined as the sound power with the reference sound intensity passing through a surface of area : hence the reference value.
The generic calculation of sound power from sound pressure is as follows: where: defines the area of a surface that wholly encompasses the source. This surface may be any shape, but it must fully enclose the source. In the case of a sound source located in free field positioned over a reflecting plane, in air at ambient temperature, the sound power level at distance r from the sound source is approximately related to sound pressure level by where
r must be sufficient that the hemisphere fully encloses the source.
Derivation of this equation: For a progressive spherical wave, where z0 is the characteristic specific acoustic impedance. Consequently, and since by definition, where is the reference sound pressure, The sound power estimated practically does not depend on distance. The sound pressure used in the calculation may be affected by distance due to viscous effects in the propagation of sound unless this is accounted for.
