Socket 370


Socket 370 is a CPU socket first used by Intel for Pentium III and Celeron processors to first complement and later replace the older Slot 1 CPU interface on personal computers. The "370" refers to the number of pin holes in the socket for CPU pins.
Socket 370 was replaced by Socket 423 in 2000.

Overview

Socket 370 started as a budget oriented platform for 66 MHz FSB PPGA Mendocino Celeron CPUs in late 1998, as the move to on-die L2 cache removed the need for a PCB design as seen on Slot 1. From late 1999 to late 2000 it was Intel's main desktop socket for 100/133 MHz FSB Coppermine Pentium IIIs. In 2001, the Tualatin Pentium III processors brought changes to the infrastructure which required dedicated Tualatin-compatible motherboards; some manufacturers would indicate this with a blue socket. These late sockets were typically compatible with Coppermine processors, but not older Mendocino Celerons. Some motherboards that used Socket 370 support Intel processors in dual CPU configurations. Others allowed the use of a Socket 370 or Slot 1 CPU, although not at the same time. The Via-Cyrix Cyrix III, later renamed the VIA C3, also used Socket 370.
The weight of a Socket 370 CPU cooler should not exceed 180 grams. Heavier coolers may result in damage to the die when the system is not properly handled.

Socket 370 Intel processors mechanical load limits

Most Intel Socket 370 processors have the following mechanical maximum load limits which should not be exceeded during heat sink assembly, shipping conditions, or standard use. Load above those limits will crack the processor die and make it unusable.
LocationDynamicStatic
Die Surface890 N 222 N
Die Edge667 N 53 N

Socket 370 Intel processors with integrated heat sink mechanical load limits

All Intel Socket 370 processors with integrated heat sink have the following mechanical maximum load limits which should not be exceeded during heatsink assembly, shipping conditions, or standard use. Load above those limits will crack the processor die and make it unusable.
Location of integrated heat sinkDynamicStatic
surface890 N 667 N
edge556 N N/A
corner334 N N/A