Sega Card


The Sega Card, known in Japan as Sega My Card, is a memory card format used as game storage for the SG-1000/SC-3000 and the Mark III/Master System. Produced from 1983 to 1987 by Mitsubishi Plastics, the cards are plugged into onboard cardslots or into compatible adapters. Several versions of the format were created, including a rewritable one that allows new titles to be downloaded to a card. While substantially cheaper to produce than cartridges, the storage limitations of the format resulted in Sega exclusively distributing games on cartridges. Despite the failure of the Sega Card, NEC found more success with its own memory card format, the HuCard, which was primary storage medium for its PC Engine game console.

History

The format was originally released in 1983 in the Japanese market, under the name My Card. Initially it was for use with the SC-3000 and the SG-1000 series of consoles via an optional accessory, the Card Catcher. Later Sega platforms, the Sega Mark III and the original Master System, have built-in card slots. The intention of the format was to provide cheaper distribution means than the more conventional game cartridges. The Sega Card product consists of less material and has smaller packaging. Sega Cards, while cheaper than cartridges, have significantly smaller storage capacities, than contemporary cartridges, which have 16 to 512 KB of ROM. As games became larger, card releases gradually ceased. The final release, in Japan, was Woody Pop, released on 15 March 1987.
Overall, Sega published only a dozen games in the format for the Mark III/Master System before moving on to producing solely game cartridges. The Master System II, a revised model of the console, has no Sega Card support, and all the Sega Card games released in Europe were eventually re-released in cartridge format, reflecting Sega's move away from cards.
Similar but incompatible formats, also manufactured by Mitsubishi Plastics, are used by other computers and consoles: the BeeCard on the MSX, and the HuCard on the NEC PC Engine.

Technical data

There are four versions of the card. The original My Card was released for Sega's SG-1000 console and SC-3000 series. The cards are also compatible with the Tsukuda Original Othello MultiVision, an SG-1000 clone and the SG-1000-compatible Pioneer SD-G5 peripheral.
The second version of the card was for the Sega's Japan-only Mark III. The Mark III is also backward compatible with SG-1000 My Cards. The third version of the card, called the "Sega Card" was released for the Master System, the international version of the Mark III. The Power Base Converter has a card slot allowing for use of the cards on the Mega Drive/Genesis.
The final version of the format was the My Card EP, a rewritable version that was test marketed only in Japan.

SG-1000 My Card

The Card Catcher peripheral allows for use of the cards with the SG-1000. A limited edition version of the Card Catcher is bundled with two games, and Dragon Wang. The games were also sold separately from the Card Catcher and allowed players to send away for a free adapter at the time.
The original SG-1000 models and the SC-3000 series, along with compatible hardware do not have built-in card slots, as they were released before the original My Card. Instead, they require the Card Catcher to be placed in the cartridge slot to use card-based games.
Card releases are distinguished from cartridge releases by their part numbers. Standard SG-1000 releases sport a 4-digit number, G-10XX, with a unique two-digit number at the end. Card releases only have a two digit number, C-XX. The numbering from the cartridge releases was continued with the card releases though, with subsequent card releases being given two-digit numbers that are higher than those from cartridge releases. Games released both on cartridges and cards retain the unique two digit number with the "10" removed from the part number.
The successor to the SG-1000, the Sega Mark III was released in October 1985 and is backward compatible with both SG-1000 cartridges and My Cards. The subsequent international version of the Mark III, the Master System retains compatibility with My Card software, though Japanese software is incompatible on non-Japanese hardware. However, the Power Base Converter, which allows Master System software to be run on Sega's Mega Drive/Genesis only retains compatibility with Mark III/Master System My Cards.
In New Zealand, Grandstand Leisure Limited released both the Card Catcher and the following My Card games:

My Card Mark III / Sega Card

The successor to the SG-1000 card format is the Mark III My Card. With the October 1985 release of the Sega Mark III, all games were initially available as My Cards. But with 1986's arrival of "Gold Cartridge" branded releases, Sega started transitioning to the cartridge as the primary distribution media. By 1987, games had stopped being released in the My Card Mark III format.
Outside Japan, My Card Mark III was released under the name "Sega Card", with the 1986 release of the Western version of Mark III, the Master System. Subsequent versions of the Master System, including the "Master System II" are missing the card slot. The Power Base Converter allows Sega Cards and My Cards to be used with the Mega Drive/Genesis. The card format is mostly region locked, preventing non-Japanese hardware from playing Japanese My Cards. This is not the case for Japanese hardware. However, Woody Pop is the only Japanese card release compatible with any system capable of playing My Cards/Sega Cards.

My Card EP

In 1985, Sega released another version of the card in Japan called the My Card EP, a rewritable version of the format. Sega promoted the My Card EP using flyers and newspaper advertisements and pilot tested it at Tokyo's Tamagawa Takashimaya Futakotamagawa.
Dealers were to install EPROM rewriting machines at retail locations, while users would bring their card and write other games onto it. Players were charged a fee that was lower than that of a retail game. Cards initially cost 5000 yen each, while rewrites on the card cost 1800 yen. The back of the cards did not have the silver sticker from standard My Cards.
The format was not commercially successful and was abandoned. Since then, the cards are quite rare and have fetched high prices at auction.
Games were released onto the EP format at the same time as they were released onto standard My Cards. New My Card EPs came with either Dragon Wang or Star Jacker pre-written on the card, with the below titles available for rewriting.

List of compatible consoles

Model nameMy CardMy Card Mark IIISega Card
My Card EPComment
SG-1000
Requires Card Catcher
SG-1000 II
Requires Card Catcher
Only released in Japan
SC-3000
Requires Card Catcher
SC-3000H
Requires Card Catcher
Othello Multivision
Requires Card Catcher
Only released in Japan
Othello Multivision
Requires Card Catcher
Only released in Japan
SD-G5
Requires Card Catcher
Only released in Japan
Sega Mark III
Master System
Master System
Japanese My Card games are not supported except for Woody Pop.
Mega Adapter/Power Base Converter/Master System Converter
Original My Cards and F-16 Fighting Falcon are not supported.
Master Gear Converter
Requires Card Catcher + Mark III to Master System adapter
Not released in Japan.