On 18 May 2006, Siemens and Russian Railways signed a €276 million order for eight high-speed trains with a 30-year service contract worth around €300 million. model railway featuring the Sapsan train on the Moscow – Saint Petersburg Railway and Moscow to Nizhny Novgorod Railway in the Museum of the Moscow Railway, Moscow. The trains were ordered to connect Moscow with Saint Petersburg and later Nizhny Novgorod at a speed of up to. They are derived from the German ICE 3 train but with bodies widened by to to suit Russia's wide loading gauge. Four of the trains are equipped for both 3 kV DC and operation. The total length of each ten-car train is, carrying up to 600 passengers. Development and construction was carried out by Siemens at Erlangen and Krefeld in Germany. In August 2009, it was announced that the fifth Sapsan had been delivered to Russia, of the eight that were planned. Four single-voltage trains entered passenger service at the end of 2009 on the Moscow – St Petersburg route, with the dual-system trains entering service on the Nizhny Novgorod route on 30 July 2010. Sapsan set records for the fastest train in Russia on 2 May 2009, travelling at and on 7 May 2009, travelling at. On 19 December 2011, a €600 million order for an additional twenty trainsets including eight EVS2 sets was signed in order to facilitate an increased number of services on existing lines and the expansion of new service elsewhere in the system. The second-batch EVS1 sets will be same details as the first-batch EVS1 sets, but the second-batch EVS2 sets will have retractable steps to suit for low platforms, unlike the first-batch EVS2 sets.
Operations
Since entering service in December 2009, it has been Russian Railways' only profitable passenger service, with an occupancy rate of 84.5%. According to the timetable valid from 30 October 2011, the direct train from Moscow to St Petersburg without intermediate stops needs three hours 40 minutes, the train from Moscow to Nizhniy Novgorod 3 hours an 55 minutes. Introduction of Sapsan initially provoked cancelling of affordable daytime trains between Moscow and St Petersburg. Since the end of 2012, Moscow – St Petersburg daytime trains other than Sapsan were running again. There were a series of stone throwing attacks against Sapsan trains. Possible reasons including cancelling of commuter trains, disruption of local transportation in rural areas, and accidents because of poor safety for pedestrians have been suggested. New bridge crossings were built, platforms along the railway were reconstructed and additional track was completed in 2015. New Lastochka commuter trains were introduced on the Moscow – Tver and St Petersburg – Bologoye routes. Local trains in the rural areas were saved.
Route
Moscow – Saint Petersburg route
The first and the only route for Sapsan trains. Moscow – Tver – Vyshny Volochyok – Bologoye – Uglovka – Okulovka – Chudovo – Saint Petersburg There are no Sapsan trains stopping at all stations on the route. The fastest ones do not stop between Moscow and Saint Petersburg at all. Numbers of the trains which stop at intermediate stations are listed above. Such measures were implemented to increase speed.
Moscow – Nizhny Novgorod route
Former route of Sapsan trains. Since 2015, new Talgo Strizh train was introduced. All the Sapsans were directed to Moscow – St Petersburg route. Talgo trains are also high speed but more suitable for this route.
Saint Petersburg – Nizhny Novgorod route
On 1 March 2018, Russian Railways reopened the discontinued Saint Petersburg – Moscow – Nizhny Novgorod route which allows passengers to take an 8 hour 11 minute journey without a train change in Moscow.
Tickets
On 1 July 2012, the Russian Railways company introduced a new tariff system for Sapsan trains which dynamically prices tickets based on two factors:
The date of sale of the ticket,
Percentage of occupied seats on the train.
The new rates range from 0.8 to 1.2 times the base rate for the day. It is possible to see the final price of a ticket for a specific date during the booking process.
