Saiga-12


The Saiga-12 is a 12-gauge shotgun available in a wide range of configurations, patterned after the Kalashnikov series of rifles and named after the Saiga antelope. Like the Kalashnikov rifle variants, it is a rotating bolt, gas-operated gun that feeds from a box magazine. All Saiga-12 configurations are recognizable as Kalashnikov-pattern guns by the large lever-safety on the right side of the receiver, the optic mounting rail on the left side of the receiver and the large top-mounted dust cover held in place by the rear of the recoil spring assembly.
The Saiga-12 is manufactured by the arms division of Izhmash, in Russia. Izhmash also manufactures Saiga 20s and Saiga 410s in 20-gauge and.410 bore, as well as the Saiga semi-automatic hunting rifles in a number of centerfire calibers. Russian armed forces use a combat shotgun variant called the KSK, with the 12-gauge size expressed in its metric equivalent of 18.5 mm. The picatinny rail layout is similar to the civilian 030 version.

Modifications to the basic Kalashnikov pattern

The Saiga-12 incorporates several features absent on the AK-47 and similar firearms.
Since shotgun shells are nearly twice as wide as 7.62×39mm cartridge, the extraction port in the side of the dust cover had to be increased in size. However, since the bolt had to remain the same length to fit inside the AK-47 sized receiver, the rear section of the bolt is covered by a sliding metal flap that rides on the recoil spring. This allows the gun to be sealed against dirt when the bolt is forward, but the compression of the recoil spring during firing moves the flap rearward to clear the extracted shells.
For the likely reason of simplifying production of Izhmash's other Kalashnikov-pattern guns, the Saiga-12 extractor does not rotate, but instead delegates the bolt-locking function to a caliber-neutral lug directly behind the bolt-face.
The Saiga-12 incorporates an adjustable two-position gas system, with "standard" and "magnum" settings for firing 2-3/4" and 3"-length shells respectively.
This is because firing 3" shells with high power loads such as slugs and buckshot generates so much force that the receiver will be damaged if the full power of the gas system is employed without some sort of recoil buffer. The problem is that making the gun durable with such high power loads would make it more likely to experience a cycle failure with the less powerful 2-3/4" shells and likely not to cycle at all when used with low-powered less lethal ammunition. This would essentially render it a straight-pull mechanism.

Common Saiga 12 configurations

The Saiga-12 is manufactured in several different configurations ranging from more traditional-looking hunting models to military-style models utilizing AK or SVD hardware. All these versions are available for purchase by civilians in Russia.
Civilian barrel lengths are 430 mm and 580 mm. The 580-mm version comes with a traditional rifle stock or with an AK-style separate pistol grip and folding stock. The 430-mm version has an AK-style pistol grip and folding stock. The civilian version of the 12K for the Russian domestic market features a specially-designed safety, preventing operation with stock folded. "Taktika" versions with 580-mm or 430-mm barrels feature various AK, SVD or original "Legion" furniture and AK-style open sights with high post and tangent rear. Optional screw-in chokes are available. A standard AK rail for optics may be mounted on the left side of the receiver.
Two, five, seven, eight and twelve round box magazines are available, as well as ten, twelve, and twenty round aftermarket drums. All magazines may be interchanged with all 12 gauge models, although factory-original magazines from Russia only exist in 5-, 7- and 8-round box configurations.
Prior to importation to the US, all Saiga shotguns are configured with a traditional fixed "hunting-style" rifle stock and 5-round magazine. Factory 8-round box magazines are not imported in the US, making them quite rare on the civilian market.
Recently, a newly configured version of the Saiga 12 was introduced. Called the Saiga Taktika mod 040, it features an extended magazine well, last round bolt hold open, hinged dust cover with Picatinny rail for mounting optics, picatinny rail gas block, and a newly designed 8-round magazine.
This design seems to address deficiencies that the Saiga 12 had in function. The traditional AK "rock and lock" magazine system and the difficulties associated with magazine has been replaced by a vertical insertion system that allow the magazine to be inserted with only one hand. The hinged dustcover with picatinny rail makes mounting optics simpler, and is closer to the bore axis, making sighting of optics easier. The gas-block rail system allows for the addition of combat lights and vertical fore grips. The last round bolt hold open gives the user instant feedback that the firearm is empty and allows for a quicker magazine change.
In late September 2014 the IZ109T was released in the USA. This model featured a shortened barrel with a permanently attached brake. The barrel length was 18 inches including the brake. The IZ109T also had military style features including a rear pistol grip and 6 position stock. Various modifications were made to the trigger group, bolt, and bolt carrier that allowed loaded magazine insertion without locking the bolt back. The IZ109T also featured a fully parkerized military finish.

Variants

The Saiga shotgun is also available in 20-gauge and.410 calibers known as the Saiga-20 and Saiga-410, respectively.
A bullpup configuration called Kushnapup is also available for all Saiga calibers.

Legal status

In Russia, this shotgun can be relatively simply obtained, requiring only a "smoothbore-gun license".
In response to the annexation of Crimea by the Russian Federation, U.S. President Barack Obama issued on July 16, 2014 blocking the importation of all Izhmash products, including Saiga shotguns and rifles.

Users