SNCASE SE-2100


The Sud-Est or SNCASE SE-2100, sometimes known as the Satre SE-2100 after its designer, was a tailless, pusher configuration touring monoplane with a single engine and cabin for two. Only one was built.

Design and development

The SE-2100 was designed by Pierre Satre, later the chief designer of the Concorde, at the end of World War II. An all-metal aircraft, it had a low, cantilever, straight tapered wing with 55° of sweep on the leading edge and 10.43° of dihedral. There were fixed leading edge slots and trailing edge ailerons but no conventional flaps. The wing tips carried large, rounded fins with rudder-like rear portions which only moved outwards; they were used differentially for yaw control and jointly as flaps.
The SE-2010 had a short, blunt-nosed nacelle-type fuselage with a cabin which could be configured to seat one centrally or two in side-by-side, dual control configuration. The seats were just aft of the leading edge, with a baggage compartment behind them. Access was via deep, wide, forward hinged doors on both sides; to make this possible, a piece of the wing root leading edge was an integral part of each door. A 140 hp Renault Bengali 4 four cylinder, inverted, inline engine was mounted in pusher configuration behind the cabin and air-cooled via a ventral scoop; it drove a two-blade propeller positioned just behind the trailing edge. The SE-2100's fixed, tricycle undercarriage had pneumatic shock absorbers and mainwheel brakes; the nosewheel was free-swivelling. At different times the undercarriage legs and wheels were unfaired or faired.
The SE-2010 flew for the first time on 4 October 1945.

Specifications