RepRap project
The RepRap project started in England in 2005 as a University of Bath initiative to develop a low-cost 3D printer that can print most of its own components, but it is now made up of hundreds of collaborators world wide. RepRap is short for replicating rapid prototyper.
As an open design, all of the designs produced by the project are released under a free software license, the GNU General Public License.
Due to the ability of the machine to make some of its own parts, authors envisioned the possibility of cheap RepRap units, enabling the manufacture of complex products without the need for extensive industrial infrastructure. They intended for the RepRap to demonstrate evolution in this process as well as for it to increase in number exponentially. A preliminary study claimed that using RepRaps to print common products results in economic savings.
History
RepRap was founded in 2005 by Dr Adrian Bowyer, a Senior Lecturer in mechanical engineering at the University of Bath in England. Funding was obtained from the Engineering and Physical Sciences Research Council.On 13 September 2006, the RepRap 0.2 prototype printed the first part identical to its own, which was then substituted for the original part created by a commercial 3D printer. On 9 February 2008, RepRap 1.0 "Darwin" made at least one instance of over half its rapid-prototyped parts. On 14 April 2008, RepRap made an end-user item: a clamp to hold an iPod to the dashboard of a Ford Fiesta car. By September that year, at least 100 copies had been produced in various countries.
In April 2009, electronic circuit boards were produced automatically with a RepRap, using an automated control system and a swappable head system capable of printing both plastic and conductive solder. On 2 October 2009, the second generation design, called Mendel, printed its first part. Mendel's shape resembles a triangular prism rather than a cube. Mendel was completed in October 2009. On 27 January 2010, the Foresight Institute announced the "Kartik M. Gada Humanitarian Innovation Prize" for the design and construction of an improved RepRap.
On 31 August 2010, the third generation design was named Huxley. It was a miniature of Mendel, with 30% of the original print volume. Within two years, RepRap and [|RepStrap] building and use were widespread in the technology, gadget and engineering communities.
In 2012, the first successful Delta design, Rostock, had a radically different design. The latest iterations used OpenBeams, wires instead of belts, and so forth, which also represented some of the latest trends in RepRaps.
In early January 2016, RepRapPro announced that it would cease trading on 15 January 2016. The reason given was congestion of the market for low-cost 3D printers and the inability to expand in that market. RepRapPro China continues to operate.
Hardware
As the project was designed by Dr Bowyer to encourage evolution, many variations have been created. As an open source project, designers are free to make modifications and substitutions, but they must share their improvements.Designs
There are many RepRap printer designs including:Software
RepRap was conceived as a complete replication system rather than simply a piece of hardware. To this end the system includes computer-aided design in the form of a 3D modeling system and computer-aided manufacturing software and drivers that convert RepRap users' designs into a set of instructions to the RepRap to create physical objects.Initially, two CAM tool chains were developed for RepRap. The first, called "RepRap Host", was written in Java by lead RepRap developer Adrian Bowyer. The second, "Skeinforge", was written by Enrique Perez. Both are complete systems for translating 3D computer models into G-code, the machine language that commands the printer.
Later, other programs like slic3r, pronterface, Cura, were created. Recently, the Franklin firmware was created to allow RepRap printers to be used for other purposes such as milling and fluid handling.
is another popular firmware used on Duet boards. Due to the open-source nature of the firmware, people are now working on porting the like the SKR series.
The closed source KISSlicer and repetier host are also used.
Free and open-source 3-D modeling programs like Blender, OpenSCAD, and FreeCAD are preferred in the RepRap community, but almost any CAD or 3D modeling program can be used with the RepRap, as long as it can produce STL files. Thus, content creators make use of any tools they are familiar with, whether they are commercial CAD programs, such as SolidWorks and Autodesk AutoCAD, Autodesk Inventor, Autodesk 123D Design, Tinkercad, or SketchUp along with the libre software.
Replication materials
RepRaps print objects from ABS, Polylactic acid, Nylon, HDPE, TPE and similar thermoplastics.Polylactic acid has the engineering advantages of high stiffness, minimal warping, and an attractive translucent colour. It is plant-derived and biodegradable.
The mechanical properties of RepRap-printed PLA and ABS have been tested and are equivalent to the tensile strengths of parts made by proprietary printers.
Unlike in most commercial machines, RepRap users are encouraged to experiment with materials and methods, and to publish their results. Methods for printing novel materials have been developed this way. In addition, several RecycleBots have been designed and fabricated to convert waste plastic, such as shampoo containers and milk jugs, into inexpensive RepRap filament. There is some evidence that using this approach of distributed recycling is better for the environment and can be useful for creating "fair trade filament".
In addition, 3D printing products themselves at the point of consumption by the consumer has also been shown to be better for the environment.
The RepRap project has identified polyvinyl alcohol as a potentially suitable support material to complement its printing process, although massive overhangs can be made by extruding thin layers of the primary printing media as support.
Printing electronics is a major goal of the RepRap project so that it can print its own circuit boards. Several methods have been proposed:
- Wood's metal or Field's metal: low-melting point metal alloys to incorporate electrical circuits into the part as it is being formed.
- Silver/carbon-filled polymers: commonly used to repair circuit boards and are being considered for use for electrically conductive traces.
- Direct extrusion of solder
- Conductive wires: can be laid into a part from a spool during the printing process
The RepRap concept can also be applied to a milling machine and to laser welding.
Construction
Although the aim of the project is for RepRap to be able to autonomously construct many of its own mechanical components soon using fairly low-level resources, several components such as sensors, stepper motors and microcontrollers cannot yet be made using the RepRap's 3D printing technology and so have to be produced independently. The plan is to approach 100% replication over a series of versions. For example, from the onset of the project, the RepRap team has explored a variety of approaches to integrating electrically-conductive media into the product. This would allow inclusion of connective wiring, printed circuit boards, and possibly motors in RepRapped products. Variations in the nature of the extruded, electrically-conductive media could produce electrical components with different functions from pure conductive traces, similar to the 1940s sprayed-circuit process Electronic Circuit Making Equipment, by John Sargrove. A related approach is printed electronics. Another non-replicable component is the threaded rods for linear motions. A current research area is in using replicated Sarrus linkages to replace them.Project members
The "Core team" of the project has included:- Dr Adrian Bowyer, Former Senior Lecturer, Mechanical Engineering Department, University of Bath
- Michael S. Hart, creator of Project Gutenberg, Illinois
Goals