RISC iX


RISC iX is a discontinued Unix operating system designed to run on the Acorn Archimedes. Heavily based on 4.3BSD, it was initially completed in 1988a year after Arthur but prior to RISC OS.

Features

Later versions upgraded the X11 server to release 4, and was certified to conform to the X/Open Portability Guide 3 Base profile.
The native file system implemented a transparent executable file compression mechanism that took advantage of the hardware's 32 KiB page size and sparse files. Additionally, the console featured a two-cursor text copying mechanism inspired by Acorn's own earlier 8-bit range including the BBC Micro.

Distribution

RISC iX was either supplied preinstalled on new computer hardware or was installed onsite from a portable tape drive by Granada Microcare, who would take the installation tape away with them. The cost of purchase was £1,000.
Once installed a backup of the core operating system to three floppy disks was possible, allowing future reinstallation.

Supported hardware

Machines

M4

An unreleased machine, built internally by Acorn for the development of RISC iX. Reputedly only three were built and one of them has subsequently been destroyed. All known examples are owned by The National Museum of Computing.

A680 Technical Publishing System

Unreleased but widely prototyped, the A680 contained an ARM2 processor, 8 MiB RAM and a 67 MB hard drive running from an onboard SCSI controller. It is rumoured that overheating from the SCSI controller was one reason for the machine to never be released.

R140

Based on the A440/1, the R140 contained an 8 MHz ARM2 processor, 4 MiB RAM and a 47 MiB, later upgraded to 56 MiB, ST506 hard drive. Supplied with RISC OS 2 in ROM, the machine would boot that OS then could either automatically boot RISC iX totally removing RISC OS from memory or continue running RISC OSoptionally being rebooted into RISC iX at any time.
At the time of initial release in 1989, the cost of the R140 was £3,500.
An ordinary A440/1 with at least 4 MiB RAM and a suitable hard drive could run RISC iX. The R140 and A440/1 were hampered by the memory management unit, using 32 KiB pages.

R260

Based on the A540, the R260 originally contained a 26 MHz, ARM3 processor, 4 MiB RAM SCSI adapter and a 100 MB SCSI hard drive. It booted in the same style as the earlier R140. The machine was supplied with an Ethernet adapter.
The system was released in 1990 priced at £3,500 as its predecessor had been.
A similarly configured A540 could run RISC iX.

R225

The R225 was a diskless version of the R260. It required a network file server or an R260 to boot.

Later machines

RISC iX is not compatible with later Archimedes machines.

Peripherals

As well as industry-standard Ethernet, Acorn's own Econet was supported, including an IP over Econet transmission system.