RD-120


The RD-120 is a liquid upper stage rocket engine burning RG-1 and LOX in an oxidizer rich staged combustion cycle with an O/F ratio of 2.6. It is used in the second stage of the Zenit family of launch vehicles. It has a single, fixed combustion chamber and thus on the Zenit it is paired with the RD-8 vernier engine. The engine has been developed from 1976 to 1985 by NPO Energomash with V.P. Radovsky leading the development. It is manufactured by, among others, Yuzhmash in Ukraine.
It should not be confused with the RD-0120, which is a discontinued LOX/hydrogen rocket engine that was used in the Soviet Energia launch system.

History

During the Buran programme initial development of the 11D77 —the launch vehicle later known as Zenit—, KBKhA had been assigned the development of the second stage engine, as they had done for the Proton and Soyuz vehicles. But given the difficulties for NPO Energomash in developing the RD-123, they ceded the hydrogen / oxygen sustainer engine development to KBKhA. This project, the analog of the SSME, was project RD-130 within NPO Energomash. But when KBKhA tackled the development, named it RD-0120, a name that is always a source of confusion with the engine of the current article. In exchange for them tackling the difficult development of the cryogenic propellant engine, Energomash assumed the responsibility of developing the second stage engine of the 11D77, which would eventually be known as the RD-120. The fact that the RD-120 and the RD-0120 had this intertwined conception, within the same program, and with a swap of designer bureaus, does not help to avoid the confusion.
On March 16, 1976 the Government passed a resolution for the development of Zenit, the RD-171 and RD-120. By April 1976, Yuzhnoye supplied NPO Energomash with the final requirements for the 11D77 first and second stage propulsion. One of the desirable effects of consolidating the first and second stage propulsion on the same designer, was that they could learn their lessons on staged combustion engines on the smaller and simpler upper stage engine, and then apply them to the bigger and more innovative first stage RD-170. NPO Energomash, had already worked on a prototype kerosene / oxygen staged combustion engine in that range, based on the RD-268 hypergolic engine, which was already under serial production with Yuzhmash.
In February, 1977, the preliminary design of the RD-120 was finished. And on January 31, 1979 the first fire test of the RD-120 was performed.
The RD-120 had a complicated debut, with the second stage failing on its first, second and fourth flights. While only the first failure could be attributed to the RD-120 —the propellant flow regulator had a leak and the stage ran out of propellant before being orbital—, the program initial performance was quite troubling. Eventually it proved its worth, and by December 1987 the RD-120 were considered commissioned. But in the years of the Soviet dissolution, the second stage failed twice in a row on August 30, 1991 and February 5, 1992. Zenit had other second stage failures, but only the first one has ever been attributed directly to the RD-120 itself.
During 1990, the NPO Energomash Head of the Propulsion Department, and leading designer, V.K.Chvanov, was awarded the State Prize for the creation of RD-120.
In October 1992, Pratt & Whitney signed an agreement with NPO Energomash to sale and represent their line of engine in the United States. During the initial version of the X-34 program, the one trying to develop a reusable launch vehicle for small payloads through a public/private association, the RD-120 was seriously considered for the 747 air-launched first stage. The RD-120 offered the best price and performance, and was the preferred choice of Orbital Sciences. In fact, on October 11, 1995, the RD-120 was fired on the U.S. and thus became the first Russian rocket engine actively in production to be fired in American soil. This version of the engine, would mainly differ from the Zenit in the addition of a gimbal mount that would enable it to offer TVC. This version would be known as the RD-120M. The second private partner in the X-34 program, Rockwell International, wanted to use their own engine, the RS-27. And given the constrained schedule and budget of the program, the engine selection was not able to be resolved and the program cancelled and reimplemented as the pure NASA research program that the X-34 was later known for.
Also during the 1990s, the Chinese acquired two or three models of the RD-120, and possibly some documentation. This enabled them to bootstrap their indigenous kerosene staged combustion engine program, the YF-100 and YF-115. According to a WikiLeaks cable dated, September 28, 2007, the Ukrainian government denies any involvement of Ukrainian industry in that transfer, and states that no involvement, at least until 2007, had happened with the Chinese 11th nor 4th Academy regarding the transfer of RD-120 technology.
The RD-120 had significant margins built in, which allowed between 2001 and 2003 to develop a modernized 'Uprated' or 'Forced' version of the engine for Sea Launch which increased thrust 10% to. It also incorporated many improvements, which allowed it to increase chamber pressure and thrust without additional weight gain. It still has a 5% extra margin, extended the design life to 4260 seconds, the number of ignitions to 19 and allows to consider it as a base for a reusable rocket, the engine is still not capable of restarting inflight After a program that used 4 test engines and performed 28 hot fire tests with an accumulated running time of 8,135 seconds, the engine was qualified for flight. Testing started in March 2004 and it had its debut flight on February 15, 2006 where it successfully orbited EchoStar X.

Versions

This engine has had two operative versions and some proposed variations:
Not considering straight variations of the RD-120, this very influential engine has been the foundations of many engines spanning derivatives in four countries. The Ukrainian RD-801 and RD-810, the Chinese YF-100 and YF-115, as well as the Indian SCE-200 can be traced directly back to the RD-120. The Soviet/Russian RD-170 family of engines base developed on the lessons learned from the RD-120 project.

RD-170 family

As stated in the History section, the RD-120 was used as the first practical application of the oxidizer rich staged combustion with kerosene propellant at NPO Energomash, before tackling the RD-170. So, while this later family of engines have more aggressive performance parameters and the original project predates the RD-120, it was indeed the first actual design of the series development.

RD-801 and RD-810

While Yuzhnoye propulsion experience had been mostly on hypergolic propellants engines, like the RD-855 or RD-861, they were considered too toxic for modern ecological standards. While they still offer to develop hypergolic propulsion, like in the case of the RD-843 for the Vega's AVUM stage or the Tsyklon-4 project, for the Mayak launch vehicle family a more environmentally friendly LOX and kerosene propellant was decided.
Not only had Yuzhnoye mastered the most complex cycle for the propellant with the RD-8, but they had worked closely with NPO Energomash during the RD-120 program. The manufacturing is done at its sister company of Yuzhmash in Ukraine, and the RD-120 thrust augmentation project of 2001 to 2003 had been a mixed project between the three companies.
On the base of this experience, a family of derivatives engines were proposed. The RD-805 and RD-809 are mostly modifications of the RD-8, but the RD-801 and the RD-810 members of the family can be considered true descendants of the RD-120. One characteristic of this family is the limitation of keeping the preburner output temperature below.

SCE-200

On June 2, 2005, India and Ukraine signed the Framework Agreement between the Government of Ukraine and the Government of the Republic of India on Cooperation in the Peaceful Uses of Outer Space, which would enter in force on February 15, 2006. As per unconfirmed information obtained by WikiLeaks this contract involved the transfer of blueprints only for a rocket engine by the Yuzhnoye Design Office. According to official press release on March 26, 2013 by Ukrainian Ministry of Economic Development and Trade, development of a rocket engine for Indian launch vehicles initiated in 2006 under a joint Indian-Ukrainian project named "Jasmine".
The engine blue prints supposedly transferred by Ukraine to India, have been identified as the RD-810. Since the transfer specifically excluded engineering analysis methods and software, the Indians did, in fact, had to develop most technologies and engineering models to manufacture and certify the engine. Given the practically identical specifications to the RD-810, and the fact that even the Indians used the Yuzhnoye renders of the engine in their presentations, it can be considered at least heavily influenced by the RD-120.

YF-100 and YF-115

During the 1990s, the Chinese acquired two or three models of the RD-120, and possibly some documentation. This enabled them to bootstrap their indigenous kerosene staged combustion engine program, the YF-100 and YF-115. According to a WikiLeaks cable dated, September 28, 2007, the Ukrainian government denies any involvement of Ukrainian industry in that transfer, and states that no involvement, at least until 2007, had happened with the Chinese 11th nor 4th Academy regarding the transfer of RD-120 technology.
As was the same case with the Indians and the RD-810, the transfer of the physical engines and blue prints only help in the development. But the development required ten years of research, requiring the mastering of 70 key technologies, the development of 50 new materials and the construction of 61 sets of engines with a combined total of more than 40,000 seconds of ignition time by 2013.

Derivatives comparison