Qere and Ketiv


Qere and Ketiv, from the Aramaic qere or q're, and ketiv, or ketib, kethib, kethibh, kethiv, , also known as "keri uchesiv" or "keri uchetiv," refers to a system for marking differences between what is written in the consonantal text of the Hebrew Bible, as preserved by scribal tradition, and what is read. In such situations, the Qere is the technical orthographic device used to indicate the pronunciation of the words in the Masoretic text of the Hebrew language scriptures, while the Ketiv indicates their written form, as inherited from tradition.
The word is often pointed and pronounced "kri" or "keri", reflecting the opinion that it is a passive participle rather than an imperative. This is reflected in the Ashkenazi pronunciation "keri uchesiv" mentioned above.

The Masoretic tradition

s for use in public reading in synagogues contain only the Hebrew language consonantal text, handed down by tradition. However, in the Masoretic codices of the 9th–10th centuries, and most subsequent manuscripts and published editions of the Tanakh intended for personal study, the pure consonantal text is annotated with vowel points, cantillation marks and other diacritic symbols used by the Masoretes to indicate how it should be read and chanted, besides marginal notes serving various functions. That Masoretic reading or pronunciation is known as the Qere, while the pre-Masoretic consonantal spelling is known as the Ketiv.
Though the basic consonantal text written in the Hebrew alphabet was never deliberately altered, sometimes the Masoretes noted a different reading of a word than that found in the pre-Masoretic consonantal text. The scribes used qere/ketiv to show, without changing the received consonantal text, that in their tradition a different reading of the text is to be used. The qere/ketiv was also used to correct obvious errors in the consonantal text without changing it.
However, not all qere/ketiv represented cases of textual doubt, sometimes the change is deliberate. For example, the words in Deut. 28 were deliberately replaced with qere because the ketiv was considered too obscene to read in public. A very high percentage of qere/ketiv is accounted for by change of dialect from old archaic Hebrew to later Hebrew. When the old Hebrew dialect fell into disuse and certain words became unfamiliar to the masses, the scribes amended the original dialect to the later familiar dialect. A good example is the word Jerusalem, which in old Hebrew is always written ירושלם, but in a later period it is written ירושלים, thus the qere provides the more familiar reading without altering the text. This is also evident in 2 Kings 4 where the archaic Hebrew 2p feminine form of -ti is consistently eliminated by the qere, which replaces it with the familiar standard form of -t.
In such Masoretic texts, the vowel diacritics of the qere would be placed in the main text, added around the consonantal letters of the ketiv, with a special sign indicating that there was a marginal note for this word. In the margins there would be a sign, followed by the consonants of the qere reading. In this way, the vowel points were removed from the qere and written instead on the ketiv. Despite this, the vowels and consonantal letters of the qere were still meant to be read together.

Types of Qere and Ketiv

"Ordinary" qere

In an "ordinary" qere, there is only a difference in certain closely related letters, or letters that can be silent. For example, the similarly shaped letters are often exchanged, as are and the similar-sounding . Very often, one of the letters are inserted or removed from a word. Many other similar cases exist. Other times, letters are reordered within the word.
Because the difference between the qere and ketiv is relatively large, a note is made in footnotes, sidenotes or brackets to indicate it.

"Vowel" qere

Sometimes, although the letters are unchanged, the vowel points differ between the qere and ketiv of the word. The ketiv is typically omitted with no indication, leaving only the vowelization for the qere. Often the ketiv is left in an unusual spelling, but other times, both qere and ketiv remain in standard spelling.
This type of qere is different from qere perpetuum, because here, the consonants do not change. In a qere perpetuum, the consonants actually do change.

"Omitted" qere

Occasionally, a word is not read at all, in which case the word is marked ketiv velo qere, meaning "written and not read."

"Added" qere

Occasionally, a word is read but not written at all, in which case the word is marked qere velo ketiv, meaning "read and not written."

"Euphemistic" qere

In rarer cases, the word is replaced entirely for reasons of tohorat halashon, "purity of language." This type of qere is noted in a printed Hebrew Bible.

"Split/Joined" qere

In such a case, a ketiv is one word while the qere is multiple words or vice versa.

Qere perpetuum

In a few cases a change may be marked solely by the adjustment of the vowels written on the consonants, without any notes in the margin, if it is common enough that this will suffice for the reader to recognize it. This is known as a Qere perpetuum. It differs from an "ordinary qere" in that there is no note marker and no accompanying marginal note — these are certain commonly occurring cases of qere/ketiv in which the reader is expected to understand that a qere exists merely from seeing the vowel points of the qere in the consonantal letters of the ketiv.
For example, in the Pentateuch, the third-person singular feminine pronoun is usually spelled the same as the third-person singular masculine pronoun . The Masoretes indicated this situation by adding a written diacritic symbol for the vowel to the pre-Masoretic consonantal spelling h-w-' . The resulting orthography would seem to indicate a pronunciation hiw, but this is meaningless in Biblical Hebrew, and a knowledgeable reader of the biblical text would know to read the feminine pronoun here.
Another example of an important qere perpetuum in the text of the Bible is the name of the God of Israel – . Often it is marked with the vowels, indicating that it is to be pronounced as Adonai rather than with its own vowels. The consensus of mainstream scholarship is that "Yehowah" is a pseudo-Hebrew form which was mistakenly created when Medieval and/or Renaissance Christian scholars misunderstood this common qere perpetuum, so that "the bastard word 'Jehovah' obtained by fusing the vowels of the one word with the consonants of the other". The usual Jewish practice at the time of the Masoretes was to pronounce it as "Adonai", as is still the Jewish custom today.
Occasionally, the Tetragrammaton is marked to indicate a qere of Elohim, another Divine Name.

Interpretation and significance

Jewish tradition

In Jewish tradition, both the qere and the ketiv are considered highly significant. When reading the Torah scroll in the synagogue, Jewish law stipulates that the qere is to be read and not the ketiv, to the extent that if the ketiv was read, it must be corrected and read according to the qere. In addition however, Jewish law requires the scroll to be written according to the ketiv, and this is so critical that substituting the qere for the ketiv invalidates the entire Torah scroll.
Various traditional commentaries on the Torah illustrate the interplay of meaning between the qere and the ketiv, showing how each enhances the meaning of the other. Some examples of this include:
Some consider the qere and ketiv to be matters of scribal opinion, but modern translators nevertheless tend to follow the qere rather than the ketiv.
Frederick Henry Ambrose Scrivener in his 1884 commentary on the 1611 Authorized Version of the Bible reports 6637 marginal notes in the KJV Old Testament, of which 31 are instances of the KJV translators drawing attention to qere and ketiv, most being like Psalm 100 verse 3 with ketiv being in the main KJV text and the qere in the KJV marginalia, but a handful being the other way around.

Typography

Modern editions of the Chumash and Tanakh include information about the qere and ketiv, but with varying formatting, even among books from the same publisher. Usually, the qere is written in the main text with its vowels, and the ketiv is in a side- or footnote. Other times, the ketiv is indicated in brackets, in-line with the main text.
In a Tikkun, which is used to train the synagogue Torah reader, both the full text using the ketiv and the full text using the qere are printed, side-by-side. However, an additional note is still made in brackets or in a footnote
In older prayerbooks, the ketiv was vowelized according to the qere and printed in the main text. The unvowelized qere was printed in a footnote.