Primary cell


A primary cell is a battery that is designed to be used once and discarded, and not recharged with electricity and reused like a secondary cell. In general, the electrochemical reaction occurring in the cell is not reversible, rendering the cell unrechargeable. As a primary cell is used, chemical reactions in the battery use up the chemicals that generate the power; when they are gone, the battery stops producing electricity. In contrast, in a secondary cell, the reaction can be reversed by running a current into the cell with a battery charger to recharge it, regenerating the chemical reactants. Primary cells are made in a range of standard sizes to power small household appliances such as flashlights and portable radios.
Primary batteries make up about 90% of the $50 billion battery market, but secondary batteries have been gaining market share. About 15 billion primary batteries are thrown away worldwide every year, virtually all ending up in landfills. Due to the toxic heavy metals and strong acids and alkalis they contain, batteries are hazardous waste. Most municipalities classify them as such and require separate disposal. The energy needed to manufacture a battery is about 50 times greater than the energy it contains. Due to their high pollutant content compared to their small energy content, the primary battery is considered a wasteful, environmentally unfriendly technology. Due mainly to increasing sales of wireless devices and cordless tools which cannot be economically powered by primary batteries and come with integral rechargeable batteries, the secondary battery industry has high growth and has slowly been replacing the primary battery in high end products.

Usage trend

In the early twenty-first century, primary cells began losing market share to secondary cells, as relative costs declined for the latter. Flashlight power demands were reduced by the switch from incandescent bulbs to light-emitting diodes.
The remaining market experienced increased competition from private- or no-label versions. The market share of the two leading US manufacturers, Energizer and Duracell, declined to 37% in 2012. Along with Rayovac, these three are trying to move consumers from zinc-carbon to more expensive, longer-lasting alkaline batteries.
Western battery manufacturers shifted production offshore and no longer make zinc-carbon batteries in the United States.
China became the largest battery market, with demand projected to climb faster than anywhere else, and has also shifted to alkaline cells. In other developing countries disposable batteries must compete with cheap wind-up, wind-powered and rechargeable devices that have proliferated.

Comparison between primary and secondary cells

Secondary cells are in general more economical to use than primary cells. Their initially higher cost and the purchase cost of a charging system can be spread out over many use cycles ; for example, in hand-held power tools, it would be very costly to replace a high-capacity primary battery pack every few hours of use.
Primary cells are not designed for recharging between manufacturing and use, thus have battery chemistry that has to have a much lower self-discharge rate than older types of secondary cells; but they have lost that advantage with the development of rechargeable secondary cells with very low self discharge rates like low self-discharge NiMH cells that hold enough charge for long enough to be sold as pre-charged.
Common types of secondary cells due to their much lower internal resistance do not suffer the large loss of capacity that alkaline, zinc–carbon and zinc chloride do with high current draw.
Reserve batteries achieve very long storage time without loss of capacity, by physically separating the components of the battery and only assembling them at the time of use. Such constructions are expensive but are found in applications like munitions, which may be stored for years before use.

Polarization

A major factor reducing the lifetime of primary cells is that they become polarized during use. This means that hydrogen accumulates at the cathode and reduces the effectiveness of the cell. To reduce the effects of polarization in commercial cells and to extend their lives, chemical depolarization is used; that is, an oxidizing agent is added to the cell, to oxidize the hydrogen to water. Manganese dioxide is used in the Leclanché cell and zinc–carbon cell, and nitric acid is used in the Bunsen cell and Grove cell.
Attempts have been made to make simple cells self-depolarizing by roughening the surface of the copper plate to facilitate the detachment of hydrogen bubbles with little success. Electrochemical depolarization exchanges the hydrogen for a metal, such as copper, or silver, so called.

Terminology

Anode and cathode

The battery terminal that develops a positive voltage polarity is called the cathode and the electrode with a negative polarity is called the anode. This is the reverse of the terminology used in an electrolytic cell or thermionic vacuum tube. The reason is that the terms anode and cathode are defined by the direction of electric current, not by their voltage. The anode is the terminal through which conventional current enters the cell from the external circuit, while the cathode is the terminal through which conventional current leaves the cell and flows into the external circuit. Since a battery is a power source which provides the voltage which forces the current through the external circuit, the voltage on the cathode must be higher than the voltage on the anode, creating an electric field directed from cathode to anode, to force the positive charge out of the cathode through the resistance of the external circuit.
Inside the cell the anode is the electrode where chemical oxidation occurs, as it donates electrons which flow out of it into the external circuit. The cathode is the electrode where chemical reduction occurs, as it accepts electrons from the circuit.
Outside the cell, different terminology is used. As the anode donates positive charge to the electrolyte, it becomes negatively charged and is therefore connected to the terminal marked "−" on the outside of the cell. The cathode, meanwhile, donates negative charge to the electrolyte, so it becomes positively charged and is therefore connected to the terminal marked "+" on the outside of the cell.
Old textbooks sometimes contain different terminology that can cause confusion to modern readers. For example, a 1911 textbook by Ayrton and Mather describes the electrodes as the "positive plate" and "negative plate".