Potassium heptafluorotantalate


Potassium heptafluorotantalate is an inorganic compound with the formula K2. It is the potassium salt of the heptafluorotantalate anion 2−. This white, water-soluble solid is an intermediate in the purification of tantalum from its ores and is the precursor to the metal.

Preparation

Industrial

Potassium heptafluorotantalate is an intermediate in the industrial production of metallic tantalum. Its production involves leaching tantalum ores, such as columbite and tantalite, with hydrofluoric acid and sulfuric acid to produce the water-soluble hydrogen pentafluorotantalate.
This solution is subjected to a number of liquid-liquid extraction steps to remove metallic impurities before being treated with potassium fluoride to produce K2

Lab-scale

Hydrofluoric acid is both corrosive and toxic, making it unappealing to work with; as such a number of alternative processes have been developed for small-scale syntheses. Potassium heptafluorotantalate can be produced by both anhydrous and wet methods. The anhydrous method involves the reaction of tantalum oxide with potassium bifluoride or ammonium bifluoride according to the following equation:
The method was originally reported by Berzelius.
K2 can also be precipitated from solutions in hydrofluoric acid provided that the concentration of HF is below about 42%. Solutions having higher concentrations of HF yield potassium hexafluorotantalate . The K-salt can be also precipitated from a solution in hydrofluoric acid of tantalum pentachloride:

Structure

Potassium heptafluorotantalate exists in at least two polymorphs. α-K2 is the most common form and crystallises in the monoclinic P21/c space group. The structure is composed of 2− units interconnected by potassium ions. 2− polyhedra may be described as monocapped trigonal prisms with the capping atom located on one of the rectangular faces. Potassium atoms are 9-coordinated and may be viewed as distorted monocapped square prisms.
At temperatures above 230 °C this converts to β-K2, which is orthorhombic. This structure also consists of potassium ions and the complex anion 2−. The structure of the 7-coordinate 2− units is essentially unchanged. However the potassium atoms now exist in 2 environments where they coordinate to either 11 or 8 fluorine atoms.

Reactions

K2 is primarily used to produce metallic tantalum by reduction with sodium. This takes place at approximately 800 °C in molten salt and proceeds via a number of potential pathways.
K2 is susceptible to hydrolysis. For example, a boiling aqueous solution of K2 yields potassium oxyfluorotantalate, known as “Marignac’s salt”. In order to prevent hydrolysis and co-precipitation of potassium oxyfluorotantalate, a small excess of HF is added to the solution.