Panzer 38(t)


The Panzerkampfwagen 38, originally known as the ČKD LT vz. 38 was a tank designed during the 1930s, which saw extensive service during World War II. Developed in Czechoslovakia by ČKD, the type was adopted by Nazi Germany following the annexation of Czechoslovakia. With the German Army and other Axis forces, the type saw service in the invasions of Poland, France and the USSR. Production ended in 1942, when its main armament was deemed inadequate. In all, over 1,400 Pz. 38s were manufactured. The chassis of the Pz. 38 continued to be produced for the Marder III with some of its components used in the later Jagdpanzer 38 tank destroyers and its derivative vehicles.
The stands for tschechisch, the German word for Czech; the Czechoslovak military designation was LT vz. 38. Manufacturer's designations included TNH series, TNHPS, LTP and LTH. The special vehicle designation for the tank in Germany was Sd. Kfz. 140.

Description

The Panzer 38 was a conventional inter-war tank design, with riveted armour. The armour varied in thickness from 10 mm to 25 mm in most versions. Later models increased this to 50 mm by bolting on an additional 25 mm armour plate to the front portion of the hull. The sides received an additional 15 mm increase of armour from Ausf. E production runs onward.
The two-man turret was centrally located, and housed the tank's main armament, a 37 mm Skoda A7 gun with 90 rounds of ammunition. In addition, a 7.92 mm machine gun was in a ball mount to the right of the main gun. This machine gun could be trained on targets independently of the main gun, or coupled to the main gun for use as a conventional coaxial machine gun. The driver was in the front right of the hull, with the radio operator seated to the driver's left. The radio operator manned the hull-mounted 7.92 mm machine gun in front in addition to operating the radio on his left.
Minor adjustments, such as adjustable seats for the driver and firmer footing for the commander/gunner and loader, were provided in German service. A total of 2,550 rounds were carried for the bow and turret machine guns. The driver could also fire the hull machine gun with a trigger fitted on the left tiller bar.
In German service, a loader position was added to the turret by reducing the ammunition capacity by 18 rounds. All future Panzer 38 tanks were rebuilt according to this specification and those already in service were modified accordingly. The commander had to aim and fire the main gun in addition to his role as commander.
The engine was mounted in the rear of the hull and powered the tank through a transmission at the front of the hull with five forward gears and one reverse gear. The track ran under four rubber-tired road wheels and back over a rear idler and two track return rollers. The wheels were mounted on a leaf-spring double-bogie mounted on two axles.

Development

In 1935, the Czechoslovak tank manufacturer ČKD was looking for a replacement for the LT-35 tank they were jointly producing with Škoda Works. The LT-35 was complex and had shortcomings, and ČKD felt there would be orders both from the expanding Czechoslovak army and for export.
ČKD decided to use a leaf-spring suspension with four large wheels for their new tank with an export success under the name "TNH". With small variations for each customer, 50 were exported to Iran, 24 each to Peru and Switzerland. Lithuania also ordered some. The British Royal Armoured Corps had one trial model delivered on 23 March 1939 to Gunnery School at Lulworth. A report stated that "the gunner could not sit back comfortably as the wireless set was in the way of his left shoulder". The report also stated that, due to the shudder while the vehicle was on the move, it was impossible to lay the gun. Even at the speed of 8.05 km/h, accuracy was poor. As a result, the British did not purchase the LT-35 and the trial model was returned.
In the fall of 1937, the Czechoslovak Armed Forces launched a contest for a new medium tank; Škoda, ČKD and Tatra competed. Škoda Praga submitted the existing joint production export model mentioned above. ČKD also entered a prototype separate from the above, the interesting V-8-H, which proved to have numerous mechanical problems. Tatra, known mostly for its smaller, wheeled armoured cars, submitted a paper entry that was a very novel concept that completely changed the layout of a tank, which concept they patented in 1938. On 1 July 1938, Czechoslovakia ordered 150 of the TNHPS model, although none had entered service by the time of the German occupation.

German production

After the takeover of Czechoslovakia, Germany ordered continued production of the model as it was considered an excellent tank, especially compared to the Panzer I and Panzer II that were the Panzerwaffe's main tanks during the outset of WWII. It was first introduced into German service under the name LTM 38; this was changed on 16 January 1940 to Panzerkampfwagen 38.
The relatively small turret of the Panzer 38 was incapable of mounting a cannon powerful enough to defeat more heavily armoured tanks such as the T-34, so production of the Pz. 38 halted in June 1942 when more than 1,400 had been built. Other examples of the Pz. 38 were also sold to a number of other Axis nations, including Hungary, Slovakia, Romania, and Bulgaria.
The main advantages of the Panzer 38, compared to other tanks of the day, were a high reliability and sustained mobility. In one documented case, a regiment was supplied with tanks driven straight from the factory in 2.5 days instead of the anticipated week, without any mechanical breakdowns. In the opinion of the crews, the drive components of the Pz. 38 - engine, gear, steering, suspension, wheels and tracks - were perfectly in tune with each other. The Pz. 38 was also considered to be very easy to maintain and repair.
After production of the Pz. 38 ceased, the chassis was used for tank destroyer designs, which were produced in greater numbers than the original Pz. 38. In 1942-1944, about 1,500 examples of the Marder III model were produced. It was replaced by the Jagdpanzer 38, based on a modified Panzer 38 chassis, of which approximately 2,800 were produced. The Panzer 38 chassis was also the basis for an anti-aircraft gun carrier, the Flakpanzer 38, of which about 140 were produced. The Aufklärungspanzer 38 was a reconnaissance vehicle based on a 38 tank fitted with a "Hängelafette" turret ; a support version armed with a 75 mm KwK 37 L/24 gun mounted in the modified superstructure was also designed. Seventy Aufklärungspanzer 38 with a 20 mm gun were built in February and March 1944; just two Aufklärungspanzer 38 with a 75 mm gun were built in 1944.

Swedish production

Since the 90 PzKpfw 38 Ausf. S built for Sweden to be delivered in March 1940 were confiscated with the invasion of Czechoslovakia, negotiations with Böhmisch-Mährische-Maschinenfabrik for the blue-prints needed for license production commenced and an agreement was reached at the end of 1940, which included the upgrades for the TNHP-S. The riveted construction was seen as a drawback, but since redrawing the blueprints for a welded construction was estimated to delay production by almost a year, no changes were made to the 116 m/41 ordered from Scania-Vabis in June 1941. Deliveries started in December 1942 and were completed in August 1943, no less than three years behind the original plan.
While clearly outdated, the need for a 10-ton light tank was so pressing that another order was placed in mid 1942. Since Scania-Vabis had reached the production ceiling, the 122 tanks had to be complemented by some 80 strv m/40. The second batch had the frontal armour upgraded to 50 mm bringing the weight to 11 tonnes, and to deal with the increased weight the 145 hp Scania-Vabis typ 1664 was replaced by a more powerful 160 hp Scania-Vabis typ 603. Due to the larger size, the hull had to be made 65 mm longer causing a wider gap between the second and third roadwheel. This enabled the fueltanks to be upgraded from 190 litres to 230 litres. Only 104 got delivered when production ended in March 1944; the last 18 chassis were built as the assault gun sav m/43 instead. Another 18 sav m/43 were purpose built.
At the end of the 1950s, 220 SI & SII were converted to Pansarbandvagn 301 armoured personnel carriers and the turrets used for airbase defences.

Operational history

Germany

The Panzer 38 performed well in the invasion of Poland in 1939 and the Battle of France in 1940. It was better armed than the Panzer I and Panzer II tanks. It was on a par with most light tank designs of the era, although it was unable to effectively engage the frontal armour of medium, heavy and infantry tank designs.
It was also used in the German invasion of the Soviet Union from 1941 onwards in German and Hungarian units, but was outclassed by Soviet tanks such as the T-34. Some ex-German units were issued to the Romanians in 1943, after the loss of many of the Romanian R-2 tanks. By then, it had become largely obsolete, though the chassis was adapted to a variety of different roles with success. Notable variations include the Sd.Kfz. 138 Marder III mobile anti-tank gun, the Sd.Kfz. 138/1 Grille mobile howitzer, Flakpanzer 38 and the Jagdpanzer 38 "Hetzer" tank destroyer. Small numbers were also used for reconnaissance, training and security duties, such as deployment on armoured trains.
The German tank commander Otto Carius, who was credited with over 150 'kills', described an action in a 38 in 8 July 1941:
In contrast, speaking about the armour on German tanks:
The above report highlights the reason why the 38 was pulled out of front lines in favour of heavier Panzer III, IV and StuG IIIs. Panzer 38 continued to serve after 1941 as a reconnaissance vehicle and in anti-partisan units for some time. Several captured examples were refitted with Soviet DTM machineguns and employed by the Red Army.
At the start of Operation Barbarossa, the Germans found Soviet T-34 tanks to be superior, as the German 37 mm Pak36 anti-tank gun proved incapable of penetrating the T-34's armour. To neutralize the T-34, the Germans mounted a captured Soviet 76.2mm gun on the chassis of the 38 model as a stop-gap measure and called it the "Marder III". Crews of early Marder III models fought exposed on top of the engine deck. Efforts to provide Marder III crews with more protection eventually lead to the Hetzer tank destroyer.
;Campaigns
A Peruvian mission went to Europe in 1935 and looked at tanks from several major manufacturers before settling on the Czech LTL. Peru bought 24 of them. They were delivered in 1938-1939 and designated Tanque 38. This small armoured force of two tank companies was complemented by truck-mounted infantry and artillery pulled by tractors. Peruvian doctrine was influenced by the French military mission operating in Peru at the time, and emphasized the use of tanks to support infantry attacks rather than in independent mobile columns.
The Peruvian tank battalion played an important role in the 1941 Ecuadorian–Peruvian War, spearheading the attack across the Zarumilla River and at Arenillas. This was helped by the fact that the Ecuadorian Army had no modern anti-tank guns and their artillery was horse-drawn. "The LTL tanks performed extremely well in the 1941 war and remained in front-line service for more than 50 years."
The tank were also used for counter-insurgency operations against the Shining Path.

Romania

The T-38 was the local designation for the wartime deliveries of Panzer 38s from Germany in 1943. T-38 served with the forces operating in Kuban. within 2nd Tank Regiment and later the 54th Company attached to the HQ and the cavalry corps in Kuban and Crimea. T-38 tanks were still in action with the 10th Infantry Division and Cavalry Divisions in 1944.

Slovakia

In Slovak Army, this tank received designation LT-38. Because of the first series of the LT-38 was not finished in March 1939 and as it was seized by Nazi Germany, the army of the Slovak State, a German ally in the Polish and Soviet campaigns, initially had only LT-35 tanks. In 1940 Slovak Army ordered 10 tanks, which were used in Operation Barbarossa. All of them were used at the Eastern Front in the Fast division in the Battalion of Assault Vehicles. Two tanks were destroyed, other 8 tanks later returned to Slovakia. After that, Slovak Army ordered another 27 tanks, and when Germans started withdrawing Panzer 38 tanks, Slovak Army received another 37 tanks from Germany. 13 tanks of this type were used by slovak insurgents during the Slovak National Uprising in 1944.
One complete tank in slovak camouflage, and one torso are displayed in the Museum of the Slovak National Uprising in Banská Bystrica. Tank 313, whose torso can be seen in the museum was the third tank from the first order, and it saw combat on Eastern front. Later it was used for training because of its high mileage. After the outbreak of Slovak National Uprising it was used by insurgents, but because of its engine failed, it was abandoned.

Sweden

All strv m/41 SI were sent to P 3 in Strängnäs, who were the only regiment who painted the road-wheels in the same camouflage pattern as the hull against regulations prescribing field-grey to be used. Most of the m/41 SII went to P 4 in Skövde, with a small number allocated to P 2 in Hässleholm and the material reserve of P 3.
All tanks had been retired from active service in the mid-1950s and later rebuilt into Pansarbandvagn 301 armoured personnel carriers.

Technical Data

TNHP-S