Oval (projective plane)


In projective geometry an oval is a circle-like pointset in a plane that is defined by incidence properties. The standard examples are the nondegenerate conics. However, a conic is only defined in a pappian plane, whereas an oval may exist in any type of projective plane. In the literature, there are many criteria which imply that an oval is a conic, but there are many examples, both infinite and finite, of ovals in pappian planes which are not conics.
As mentioned, in projective geometry an oval is defined by incidence properties, but in other areas, ovals may be defined to satisfy other criteria, for instance, in differential geometry by differentiability conditions in the real plane.
The higher dimensional analog of an oval is an ovoid in a projective space.
A generalization of the oval concept is an abstract oval, which is a structure that is not necessarily embedded in a projective plane. Indeed, there exist abstract ovals which can not lie in any projective plane.

Definition of an oval

  1. Any line meets in at most two points, and
  2. For any point there exists exactly one tangent line through, i.e.,.
When the line is an exterior line, if a tangent line and if the line is a secant line.
For finite planes we have a more convenient characterization:
A set of points in an affine plane satisfying the above definition is called an affine oval.
An affine oval is always a projective oval in the projective closure of the underlying affine plane.
An oval can also be considered as a special quadratic set.

Examples

Conic sections

In any pappian projective plane there exist nondegenerate projective conic sections
and any nondegenerate projective conic section is an oval. This statement can be verified by a straightforward calculation for any of the conics.
Non degenerate conics are ovals with special properties:
;in the real plane
  1. If one glues one half of a circle and a half of an ellipse smoothly together, one gets a non-conic oval.
  2. If one takes the inhomogeneous representation of a conic oval as a parabola plus a point at infinity and replaces the expression by, one gets an oval which is not a conic.
  3. If one takes the inhomogeneous representation of a conic oval as a hyperbola plus two points at infinity and replaces the expression by, one gets an oval which is not a conic.
  4. The implicit curve is a non conic oval.
;in a finite plane of even order
  1. In a finite pappian plane of even order a nondegenerate conic has a nucleus, which can be exchanged with any point of the conic to obtain an oval which is not a conic.
  2. For the field with elements let
Further finite examples can be found here:

Criteria for an oval to be a conic

For an oval to be a conic the oval and/or the plane has to fulfill additional conditions. Here are some results:
  1. An oval in an arbitrary projective plane, which fulfills the incidence condition of Pascal's theorem or the 5-point degeneration of it, is a nondegenerate conic.
  2. If is an oval in a pappian projective plane and the group of projectivities which leave invariant is 3-transitive, i.e. for 2 triples of points there exists a projectivity with. In the finite case 2-transitive is sufficient.
  3. An oval in a pappian projective plane of characteristic is a conic if and only if for any point of a tangent there is an involutory perspectivity with center which leaves invariant.
  4. If is an oval in a finite Desarguesian projective plane of odd order,, then is a conic. This implies that, after a possible change of coordinates, every oval of with odd has the parametrization :
For topological ovals the following simple criteria holds:

Further results on ovals in finite planes

An oval in a finite projective plane of order is a -arc, in other words, a set of points, no three collinear. Ovals in the Desarguesian projective plane for odd are just the nonsingular conics. However, ovals in for even have not yet been classified.
In an arbitrary finite projective plane of odd order, no sets with more points than, no three of which are collinear, exist, as first pointed out by Bose in a 1947 paper on applications of this sort of mathematics to the statistical design of experiments. Furthermore, by
Qvist's theorem, through any point not on an oval there pass either zero or two tangent lines of that oval.
When q is even, the situation is completely different.
In this case, sets of points, no three of which collinear, may exist in a finite projective plane of order and they are called hyperovals; these are maximal arcs of degree 2.
Given an oval there is a unique tangent through each point, and if is even Qvist's theorem, shows that all these tangents are concurrent in a point outside the oval. Adding this point to the oval gives a hyperoval. Conversely, removing any one point from a hyperoval immediately gives an oval.
As all ovals in the even order case are contained in hyperovals, a description of the hyperovals implicitly gives all ovals. The ovals obtained by removing a point from a hyperoval are projectively equivalent if and only if the removed points are in the same orbit of the automorphism group of the hyperoval. There are only three small examples where the automorphism group of the hyperoval is transitive on its points so, in general, there are different types of ovals contained in a single hyperoval.

Desarguesian Case: PG(2,2h)

This is the most studied case and so the most is known about these hyperovals.
Every nonsingular conic in the projective plane, together with its nucleus, forms a hyperoval. These may be called hyperconics, but the more traditional term is regular hyperovals. For each of these sets, there is a system of coordinates such that the set is:
However, many other types of hyperovals of PG can be found if q > 8. Hyperovals of PG for q even have only been classified for q < 64 to date.
In PG, h > 0, a hyperoval contains at least four points no three of which are collinear.
Thus, by the Fundamental Theorem of Projective Geometry we can always assume that the points with projective coordinates,, and are contained in any hyperoval. The remaining points of the hyperoval will have the form where t ranges through the values of the finite field GF and f is a function on that field which represents a permutation and can be uniquely expressed as a polynomial of degree at most 2h - 2, i.e. it is a permutation polynomial. Notice that f = 0 and f = 1 are forced by the assumption concerning the inclusion of the specified points. Other restrictions on f are forced by the no three points collinear condition. An f which produces a hyperoval in this way is called an o-polynomial. The following table lists all the known hyperovals of
PG by giving the o-polynomial and any restrictions on the value of h that are necessary for the displayed function to be an o-polynomial. Note that all exponents are to be taken
mod.

Known Hyperovals in PG(2,2h)

a) The Subiaco o-polynomial is given by:
whenever,
where tr is the absolute trace function of GF. This
o-polynomial gives rise to a unique hyperoval if and to two
inequivalent hyperovals if.
b) To describe the Adelaide hyperovals, we will start in a slightly more general setting. Let F = GF and K = GF. Let be an element of norm 1, different from 1, i.e. bq+1 = 1,. Consider the polynomial, for,
f = −1tr + −1tr1−m + t½,

where tr = trK/F = x + xq.
When q = 2h, with h even and m = ±/3, the above f is an o-polynomial for the Adelaide hyperoval.
c) The Penttila-O'Keefe o-polynomial is given by:
f = t4 + t16 + t28 + η11 + η20 + η6,

where η is a primitive root of GF satisfying η5 = η2 + 1.

Hyperovals in PG(2, q), q even, q ≤ 64

As the hyperovals in the Desarguesian planes of orders 2, 4 and 8 are all hyperconics we shall only examine the planes of orders 16, 32 and 64.

PG(2,16)

In the details of a computer search for
complete arcs in small order planes carried out at the suggestion of B. Segre are given. In PG they found a number of hyperovals which were not hyperconics. In 1975, M. Hall Jr. showed, also with considerable aid from a computer, that there were only two classes of projectively inequivalent hyperovals in this plane, the hyperconics and the hyperovals found by Lunelli and Sce. Out of the 2040 o-polynomials which give the Lunelli-Sce hyperoval, we display only one:
f = x12 + x10 + η11x8 + x6 + η2x4 + η9x2,

where η is a primitive element of GF satisfying η4 = η + 1.
In his 1975 paper Hall described a number of collineations of the plane which stabilized the Lunelli-Sce hyperoval, but did not show that they generated the full automorphism group of this hyperoval. using properties of a related generalized quadrangle, showed that the automorphism group could be no larger than the group given by Hall. independently gave a constructive proof of this result and also showed that in Desarguesian planes, the Lunelli-Sce hyperoval is the unique irregular hyperoval admitting a transitive automorphism group.
reproved Hall's classification result without the use of a computer. Their argument consists of finding an upper bound on the number of o-polynomials defined over GF and then, by examining the possible automorphism groups of hyperovals in this plane, showing that if a hyperoval other than the known ones existed in this plane then the upper bound would be exceeded.
provides a group-theoretic construction of the Lunelli-Sce hyperoval as the union of orbits of the group generated by the elations of PGU considered as a subgroup of PGL. Also included in this paper is a discussion of some remarkable
properties concerning the intersections of Lunelli-Sce hyperovals and hyperconics. In it is shown that the Lunelli-Sce hyperoval is the first non-trivial member of theSubiaco family. In it is shown to be the first non-trivial member of the Adelaide family.

PG(2,32)

Since h = 5 is odd, a number of the known families have a representative here, but due to the small
size of the plane there are some spurious equivalences, in fact, each of the Glynn type hyperovals is
projectively equivalent to a translation hyperoval, and the Payne hyperoval is projectively equivalent to the Subiaco hyperoval. Specifically, there are three classes of hyperovals, the hyperconics, proper translation hyperovals and the Segre hyperovals. There are also classes corresponding to the Payne hyperovals and the Cherowitzo hyperovals = x4 + x16 + x28 + η11 + η20 + η6,
where η is a primitive root of GF satisfying η5 = η2 + 1. The full automorphism group of this hyperoval has order 3.
cleverly structured an exhaustive computer search for all hyperovals in this plane. The result was that the above listing is complete, there are just six classes of hyperovals in PG.

PG(2,64)

By extending the ideas in to PG, were able to search for hyperovals whose automorphism group admitted a collineation of order 5. They found two and showed that no other
hyperoval exists in this plane that has such an automorphism. This settled affirmatively a long open question of B. Segre who wanted to know if there were any hyperovals in this plane besides the hyperconics. The hyperovals are:
f = x8 + x12 + x20 + x22 + x42
+ x52 + η21 + η42,

which has an automorphism group of order 15, and
f = x24 + x30 + x62 + η21 + η42,

which has an automorphism group of order 60, where η is a primitive element of GF satisfying η6 = η + 1. In it is shown that these are Subiaco hyperovals. By refining the computer search program, extended the search to hyperovals admitting an automorphism of order 3, and found the hyperoval:
f = x4 + x8 + x14 + x34 + x42 + x48 + x62 + η21 + η42,

which has an automorphism group of order 12. This hyperoval is the first distinct Adelaide hyperoval.
Penttila and Royle have shown that any other hyperoval in this plane would have to have a trivial automorphism group. This would mean that there would be many projectively equivalent copies of such a hyperoval, but general searches to date have found none, giving credence to the conjecture that there are no others in this plane.

Abstract ovals

Following, an abstract oval, also called a B-oval, of order is a pair where is a set of elements, called points, and is a set of involutions acting on in a sharply quasi 2-transitive way, that is, for any two with for, there exists exactly one with and.
Any oval embedded in a projective plane of order might be endowed with a structure of an abstract oval of the same order. The converse is, in general, not true for ; indeed, for there are two abstract ovals which may not be embedded in a projective plane, see.
When is even, a similar construction yields abstract hyperovals, see : an abstract hyperoval of order is a pair where is a set of elements and is a set of fixed-point free involutions acting on such that for any set of four distinct elements
there is exactly one with.