NTN Corporation
NTN Corporation is one of the most prominent manufacturers of bearings in Japan, second domestically only to NSK Ltd. The company is one of the largest exporters worldwide of friction-reducing products such as constant-velocity joints.
It is listed on the Tokyo Stock Exchange and is a component of the Nikkei 225 stock index.
History
Beginnings
The beginning of the Japanese bearing industry was started by competitor Nippon Seiko producing such bearings in 1914. Four years later in 1918, Nishizono Ironworks, a factory in Uchibori, Mie Prefecture began producing ball bearings.NTN Formation and Split
Five years after Nishizono Ironworks began its production of these friction reducing components, the company merged with Tomoe Trading to fabricate and market them under the name "NTN". In 1927, however, Nishizono and Tomoe split, with the former company setting up a new company called "NTN Manufacturing Company".Toyo Bearing Manufacturing
In 1934, the company reorganized as a joint-stock company, changing its name to Toyo Bearing Manufacturing. When Japan invaded Manchuria, the demand for bearings increased due to the war, and manufacturing productivity followed suit. In 1938, Toyo created a domestic subsidiary named Showa Bearing Manufacturing Company, in Mukogun, Hyogo Prefecture. Toyo absorbed Showa into its organization the following year, making the facility into its Mukogawa plant and merging Mukogawa's operations with those of their newly established plant in Kuwana.By 1945, raw materials shortages that resulted from World War II rendered Japanese bearing manufacturers unable to produce at full capacity. However, in the late 1940s, as Japan recovered from combat, demand from the war-torn country and its intracontinental neighbors increased.
NTN Sales
At the end of the decade, Toyo created a marketing division called NTN Sales, at the same time, becoming one of the five most prominent bearing manufacturers in Japan, alongside Koyo Seiko, Nippon Seiko, Asahi Seiko and Fujikoshi Kozai. They, along with the other four aforementioned companies held over 75% of that country's bearing market the following year. Three years later, in 1954, NTN Sales received the Deming Prize for statistical quality control while continuing to diversify its product offering. In 1956, the company started to manufacture expansion compensating bearings.Due to the incredible growth that Toyo underwent, the organization decentralized by creating subsidiaries to oversee new products. In 1961, Toyo set up a joint venture with INA Wälzlager Schaeffler called NTN Wälzlager Europa in order to manufacture needle bearings. Toyo utilized design data from INA Wälzlager Schaeffler to make these products. They also established Kongo Bearing Company to manage the creation of pillow block bearings. One year later, Toyo founded Senyo Kosakuki Kenkyujo, a maker of ball bearing equipment. In 1963, Toyo entered into business with Hardy Spicer to produce Birfield-type constant-velocity universal joints. They also pursued business overseas by establishing NTN Bearing Corporation of America. The following year, working with GKN Transmission, the company fabricated constant-velocity joints in their home country and formed NTN Bearing-GKN while also opening a facility in Europe called NTN France. The year after that, Toyo started manufacturing oil-impregnated sintered bearings and pipe fittings. Four years later in 1968, the company set up yet another facility in North America called NTN Bearing Corporation of Canada.
In 1971, Toyo started Toyo Bearing Okayama Company to produce automotive tapered bearings and roller bearings in addition to founding American NTN Bearing Manufacturing Corporation. It was during that same year that Toyo finished construction on a manufacturing facility in Schiller Park, their first manufacturing facility in North America. Additionally, a sales division, NTN Trading-Hong Kong and a manufacturing segment, NTN Kugellagerfabrik were created.
NTN Toyo Bearing Company
The following year, the company's name was changed from Toyo Bearing Manufacturing to NTN Toyo Bearing Company. Like other Japanese bearing manufacturers, NTN became so successful that it created angst among their overseas competitors, especially those in the United Kingdom. England in fact, urged Japanese companies to restrict exports from 1972-1974. Other countries in Europe, however, were quite adamant about procuring such superior quality bearings, and continued to do so. For this reason, the company's growth was uninterrupted during the mid-1970s. In fact, from 1973–1975, NTN Manufacturing Canada, NTN de Mexico and NTN Suramericana were opened, in addition to another factory in Elgin, Illinois.In 1977 however, NTN Toyo posted a loss of 1 billion JPY due to the increasing value of the Japanese Yen making exports more expensive. Because most of their bearings were still made inside the borders of Japan, the prices of the bearings were still subject to changes in international exchange rates. Additionally, many Japanese bearing manufacturers were penalized by the European Economic Community for predatory pricing. As a result, in 1978, for the first time in over a decade, NTN Toyo withheld dividend payments.
The value of the yen soon decreased however, and the company's exports returned to normal. Strong customer demand also resulting from the weakening yen resulted in increased sales. By 1979, all overseas NTN Toyo manufacturing facilities were once again operating at or above full production capacity.
After NTN Toyo recovered from its downturn, the company looked to expand its constant-velocity joint business in the United States. By expanding on all of their product lines in this part of the world, NTN Toyo was able to reduce the number of goods exported from Japan. In 1982, the company built an addition onto its Okayama plant for the purpose of building automotive joints. In addition, a joint venture with Hyundai Motors had this business partner manufacturing joints via a license from NTN Toyo. The following year, NTN Toyo also licensed Lepco Company and Taiway to produce additional constant-velocity joints.
From 1984 to 1985, NTN Toyo concentrated on tapered roller bearings at its United States facilities such as their Elgin factory. This building was added onto in 1984 in order to produce such bearings at a higher rate of production. In 1985, NTN Toyo Nagano Works, a designer and manufacturer of precision miniature bearings, also opened for business. That same year, NTN Toyo partnered with Federal-Mogul Corporation to produce tapered bearings and cylindrical roller bearings. The new joint venture, NTN-Bower Corporation, inherited two Federal-Mogul facilities and an additional research facility. NTN Toyo initially owned 60% of this joint venture, but purchased the remaining 40% of NTN-Bower Corporation two years later to fully acquire the company.
In 1986, the company constructed its Kuwana plant, NTN Toyo's first factory dedicated to bearings used in aerospace products. Soon after this facility was established, Timken Company claimed that NTN Toyo and other Japanese bearing makers were selling their products below market prices. As a result, the United States Department of Commerce found those companies guilty of predatory pricing. NTN Toyo was ordered to pay a financial penalty equal to 47% of the prices of the products that the company exported to that country.
In 1988, NTN Toyo established its first technical center in Michigan, added a bearing-hub factory in Elgin, and partnered with GKN Transmission and Borg-Warner to produce constant-velocity joints in Australia under the name Unidrive. Borg-Warner owned 50% of the company, GKN owned 30% and NTN Toyo owned 20%.
NTN USA Corporation/Name Change of Conglomerate to NTN Corporation
In the following year, NTN Toyo changed its name to NTN Corporation while creating a new constant-velocity joint factory and research and development center for NTN Driveshaft in Columbus, Indiana.As a result of globalization, with bearings being further governed by international guidelines, NTN consolidated its foreign operations while trying to expand further into cutting edge markets. In order to expand North American operations, the company formed NTN USA Corporation, which was slated to become a holding company for their existing US divisions. They also established an office to oversee the fabrication activities of their existing operations. One of NTN's objectives was to begin production of constant-velocity joints in North America. One of their first steps in doing so was the 1996 purchase of Federal-Mogul's ball bearings sector.
Twenty-first Century Developments
In addition to North America, NTN established in 2000 a constant-velocity joint and bearing manufacturing facility in Thailand called NTN Manufacturing Company Limited. To manage the explosion of the company's portfolio, colloquially known as the "Four Base Production and Sales System", NTN reorganized its operations. As a result, NTN Sales Corporation was made a part of the conglomerate.The following year, the company partnered with FAG Kugelfischer Georg Schafer AG to sell bearings in both North America and Europe. This partnership helped create factories in both Portugal and Hungary. NTN also started its "Management System Transformation Project" with the goal of making its regional and international operations more efficient. A Program Office was created to manage a number of subprojects. These subprojects were created to improve client relations and improve productivity.
The company then in 2002, took part in three separate joint ventures. First, they set up Shanghai NTN Corporation for the purpose of producing constant-velocity joint cassettes. Second, working with Nidec Corporation, created NTN-NIDEC Corporation in Zhejiang, China. Then, in their final joint venture that year, the company, in conjunction with Taiwan Yulon Group Corporation, created Guangzhou NTN-Yulon Drivetrain to fabricate additional constant velocity joints. The year after this, three new companies were formed, two in the United States and one in China. The two American companies, named NTK Precision Axle Corporation and Asahi Forge of America Corporation provided heat treatment and forging services, respectively. The company in China was called Beijing NTN-Seohan Driveshaft, and served as an additional manufacturing facility for their constant-velocity joint platform.
In the year 2004, NTN Mie Corporation and Shangzhou NTN-Guangyang Corporation were formed for bearing fabrication while Nagano Works, Kuwana Works, Iwata Works, and Okayama Works earned ISO/TS16949 and ISO9001 certifications. Next year, NTN Kamiina Corporation and NTN's General Research & Development Center were formed domestically while NTN Investment Corporation, NTN-NIDEC and NTN Manufacturing India were formed abroad. The year after, in 2006, NTN Corporation made two grand investments. These investments included infusions into IFA-Antriebstechnik GmbH, a producer of constant velocity joints in IFA Group as well as SNR Roulements, a sub-tier of Renault. During that same year, NTN Fukuroi Corporation became the company's third local factory for constant velocity joints.
From 2007-2009, NTN Corporation entered the large component market by establishing NTN Hakui Corporation in Ishikawa. This facility specialized in turning large bearings, while Nanjing Puzhen NTN Railway Bearing Company was formed for the fabrication of railway bearings. Soon after, in conjunction with Korea Flange Co., Ltd. KOFCO Group added Seohan-NTN Driveshaft USA Corporation to its United States conglomerate. In addition to these ventures, NTN HoudatsuShimizu Corporation was set up to manufacture super-large machinery parts and bearings, NTN Transmissions Europe Crézancy was established by the acquisition of Setfoge's Crézancy facility by NTN Transmissions Europe and NTN Shika Corporation was put in place to forge large bearings. Additionally, at the end of this period, NTN's Elemental Technology R&D Center was formed in Kuwana.
It was then in 2010 that NTN entered the wind energy market via the establishment of Seohan-NTN Bearing Company. This was a joint-venture with Seohan in South Korea. Additionally, NTN Driveshaft do Brasil and NTN Noto Corporation were formed for constant velocity joints and industrial machinery bearings. Most recently, however, NTN partnered with Luoyang LYC to distribute bearings in China, with mass production in the country expected to begin in 2012.
Consolidated Subsidiaries
NTN USA Corporation
NTN USA Corporation, based in Mount Prospect, Illinois, was founded in 1990. It is the United States holding company for several subsidiaries that supply ball, roller & mounted bearings, bearing units, constant velocity joints for the aircraft, automotive, fabrication & forklift fields in addition to power transmission equipment.American NTN Bearing Manufacturing Corporation
Founded in 1971, American NTN Bearing Manufacturing Corporation produces steel balls and anti-friction bearings at their facility in Elgin, Illinois.NTN-BCA Corporation
Founded in 1898 in Lancaster, Pennsylvania, as the Star Ball Retainer Company, Star Ball Retainer Company merged with the Bretz Company in 1910 to form the Bearing Corporation of America. NTN Corporation then acquired Bearing Corporation of America in 1996, establishing NTN-BCA Corporation in Lititz, Pennsylvania the following year. The company produced ball, mounted and needle roller bearings used in clutch releases, engines and heavy industrial equipment in addition to constant velocity joints for aerospace, automobile, forklift and manufacturing customers. The company made an announcement that they had plans to close the plant in 2009.NTN Bearing Corporation Of America
With roots tracing back to 1963, NTN Bearing Corporation of America of Mount Prospect, Illinois produces and distributes roller and ball bearings to the United States industrial, automotive and recreational clientele. Products manufactured by the company include agricultural and farm implement bearings, angular contact ball bearings, automotive bearings, ball and roller bearing mounted units, cylindrical roller bearings, electrical motor bearings, heavy industrial bearings, machine tool bearings, micro and miniature ball bearings, needle roller bearings, radial ball bearings, spherical roller bearings, tapered roller bearings and ultra-class bearing units.In addition to the bearing products produced by the company, the facility manufactures constant velocity joints and precision equipment.
Guangzhou NTN-Yulon Drivetrain
Guangzhou NTN-Yulon Drivetrain was formed in 2002 to manufacture constant velocity joints. The company is a partnership with Yulon Group, a company that manufactures automobiles through Aeolus Motor Corporation and South East Motor Corporation.NTA Precision Axle Corporation
NTA Precision Axle Corporation of Carol Stream, Illinois, was established in December 2010 is a joint venture between Asahi Forge Corporation, NTN Corporation and Takano Kogyo. The company has plans to integrate forging, heat-treatment and turning in order to pre-process automobile hub bearings starting in June 2011.NTE Gardelegen
NTE Gardelegen is a bearing manufacturer based in Gardelegen, Germany.NTK Precision Axle Corporation
In 2004, NTK Precision Axle Corporation began business with its sole facility in Frankfort, IN. The subsidiary manufactures wheel hub assemblies for four wheel drive and front wheel drive vehicles as well as axles for constant velocity joints.NTN Bearing Corporation of Canada
With roots tracing back to 1968, NTN Bearing Corporation of Canada in Mississauga, Ontario produces and sells a broad variety of bearings for applications such as automobile, industrial, recreational, skating and snowmobile markets. The company owns four strategically placed warehouses and hundreds of distribution outlets for the purpose of offering expedient nationwide service.NTN Bearing - Malaysia
NTN Bearing - Malaysia in Selangor, Malaysia is a producer of ball and roller bearings, drive shafts and other proprietary high-tech automation products. The company has additional branches in Butterworth, Ipoh, Johor Bahru and Kuantan, Malaysia.NTN Bearing Service Co.
Established in 2003, NTN Bearing Service Co. was formed by Higashinihon NTN Service Corporation, who was a wholly owned subsidiary of NTN Corporation at the time. Kyushu NTN Corporation was absorbed into the wholly owned subsidiary, which also took control of Osaka NTN Pillow Center Corporation in Kansai. The consolidation was part of structural reform plan "NEW Plan 21", which is based on the philosophy that growth in distributor size will improve the organization's capability to deliver product. The company sells and distributes ball bearings, bearing units, needle roller bearings, parts feeders and plummer blocks. The company has facilities in Hokkaido, Kyushu, Osaka and Tohoku.NTN Bearing-Singapore
Founded in 1971, NTN Bearing-Singapore is a regional distribution center of bearings, constant velocity joints and precision equipment for the Southeast Asia region.NTN Bearings (UK)
Established in 1964, NTN Bearings of Lichfield, Staffordshire is a producer of ball bearings and roller bearings.NTN-Bower Corporation
NTN-Bower Corporation in Macomb, IL is one of North America's most prominent producers of tapered roller bearings, fan housings, mass weights, precision roller bearings and other related components.NTN Casting Corporation
NTN Casting Corporation is a wholly owned subsidiary of NTN Corporation based in Hirata, Shimane Prefecture. The company is a member of the Japan Cast Iron Foundry Association, and performed research on the recycling of casting sand for use as roadbed material, which has historically taken up space in landfills.NTN (China) Investment Corporation
NTN Investment Corporation was established in Shanghai in 2005 to oversee its current operations and new projects in China to improve productivity relative to capital, equipment, information, materials, personnel, products, technology and other business resources as well as integrating supply chain channels and advancing new projects.NTN Driveshaft
NTN Driveshaft in Columbus, Indiana produces constant velocity joints used in four-wheel, front-wheel and all-wheel drive cars.NTN Engineering Plastics Corporation
NTN Engineering Plastics Corporation in Inabe District, Mie produces thrust washers, smooth and flanged one, two and three-layer sleeve bearings and high-performance sliding bearings. Additionally, the company provides, rod and pipe stock to its customers to allow them to produce their own components. Using the latest in engineering plastics technology, the company produces its products using base materials such as aromatic polyester, elastomer, Fluoro Oil, Fluoro Plastics, Polyamide, Polyamideimide, Polyetheretherketone, Polyethylene, Polyimide, Polyoxymethylene, Polyphenylensulfide and Tetrafluoroethylene.NTN Franc3
NTN Franc3 was established as a joint venture with INA-SIDAG in 1964 as NTN SIDAG S.A. The company became an NTN subsidiary almost one decade later.NTN Fukuroi Corporation
In 2006, due to the increasing worldwide need for lighter, quieter, smoother riding constant velocity joints and their subcomponents, NTN Corporation created a subsidiary in Fukuroi, Shizuoka called NTN Fukuroi Corporation. This was their third constant velocity joint manufacturing facility in Japan, and their fourteenth globally.NTN Houdatsushimizu Corporation
NTN Houdatsushimizu Corporation in Hakui District, Ishikawa was established in 2009 to expand the company's capabilities in producing extra large bearings used in large industrial machinery such as wind turbines.NTN Kamiina Corporation
NTN Kamiina Corporation in Kamiina District, Nagano was established next to NTN Nagano Works in late 2005 to produce high precision rollers to meet demand for NTN products that utilize rollers. The factory began production of these components in early 2006.NTN Kinan Corporation
With operations dating back to 1975, NTN Kinan Corporation in Wakayama, Japan produces automotive axle bearings for automakers in Japan. In 2008, the company expanded its production capacity by over 15% in order to supplement the automotive industry.NTN Kongo Corporation
Established in 1961 as Kongo Bearing Company, NTN Kongo Corporation manufactures and develops not only radial ball bearings, pillow block bearings, bearing units and clutch release bearings, but also develops and produces bearing production equipment used by NTN Corporation.NTN Kugellagerfabrik
NTN Kugellagerfabrik GmbH in Mettmann, Germany manufactures gears, ball and roller bearings, mechanical power transmission equipment such as cranks, transmission shafts, camshafts, bearing housings and plain shaft bearings.NTN Mie Corporation
Formerly known as Keiji NTN Corporation, NTN Mie Corporation in Kuwana-gun, Mie Prefecture was created in 1994 near NTN Kuwana Works and the Kuwana Engineering Centeras a model for the domestic production of bearings.