Multiple-alarm fire


One-alarm fires, two-alarm fires, three-alarm fires, etc., are categories classifying the seriousness of fires, commonly used in the United States and in Canada, particularly indicating the level of response by local authorities. The term multiple-alarm is a quick way of indicating that a fire is severe and is difficult to contain. This system of classification is used by both fire departments and news agencies.

Definition

A common misconception is that a "3-alarm fire", for example, means that three firehouses responded to the fire. This is not the rule behind the naming convention, although some cities may use the number of firehouses responding for multi-alarm designations because that is the simplest way to determine an alarm number.
The most widely used formula for multi-alarm designation is based on the number of units and firefighters responding to a fire; the more vehicles and firefighters responding, the higher the alarm designation.
With this unit/firefighter alarm designation, the initial dispatch is referred to as a "first alarm" and is typically the largest. Subsequent alarms are calls for additional units, usually because the fire has grown and additional resources are needed to combat it, or because the incident is persisting long enough that firefighters on scene need to be relieved.
Requests for units and firefighters from outside jurisdictions do not normally occur in multi-firehouse urban areas until elevated alarms are reached, but will depend on the location of the incident and the condition of the authority having jurisdiction at the time of the incident.

History

The system of classification comes from the old tradition of using pull stations to alert the local departments to a fire in their area. The "box" would send a message to all local stations by telegraph that there was a fire, indicating the intensity by number. A firefighter could consult a codebook and use a system like Morse code to send these messages back requesting for more help. For example, a code commonly used throughout the US was four rings, a pause, and another four rings to indicate a particularly intense fire, giving rise to the phrase "four alarm fire".

Typical alarm levels

Below is a list of the alarm levels used in the response policy of the New York City Fire Department. This is a basic example of how alarm levels are categorized in a fire department, how many fire apparatus or fire units respond to each alarm level, etc. In New York, however, additional special alarm levels are utilized, aside from the conventional 1st alarm fire, 2nd alarm fire, 3rd alarm fire, etc. Examples of such alarm levels are the signal 10-75 assignment, the signals 10-76 and 10-77 assignments, and the signal 10-60 assignment. A 10-75 is a working fire, the 10-76/10-77 assignments are the alarm levels separate from the 1st alarm, 2nd alarm, 3rd alarms, etc. that are the standard fire department responses to fires in high-rise buildings. The signal 10-60 is a separate response to major disasters. Engine companies, Ladder Companies, Rescue Companies, etc. respond to these disasters. Some units can act as Firefighter assist and search team units. Chiefs include Division Chiefs,Deputy Chiefs, Battalion Chiefs,Air Recon Chief,etc.
Below is how alarm levels are categorized in order per protocol. Each apparatus count is in an addition on each alarm. Each total is the total number of units on scene.
Units assigned1st Alarm fire / Box Alarm1st Alarm fire/ "All Hands" Box Alarm2nd Alarm fire3rd Alarm fire4th Alarm fire5th Alarm fire
Engine Companies3 Engine Companies4 Engine Companies8 Engine Companies12 Engine Companies16 Engine Companies21 Engine Companies
Ladder Companies2 Ladder Companies3 Ladder Companies
5 Ladder Companies7 Ladder Companies9 Ladder Companies11 Ladder Companies
Battalion Chief1 Battalion Chief2 Battalion Chiefs
5 Battalion Chiefs6 Battalion Chiefs6 Battalion Chiefs6 Battalion Chiefs
Squad Companies1 Squad Company1 Squad Company1 Squad Company1 Squad Company1 Squad Company
Rescue Companies1 Rescue Company1 Rescue Company1 Rescue Company1 Rescue Company1 Rescue Company
Division Chief1 Division Chief1 Division Chief1 Division Chief1 Division Chief1 Division Chief
Deputy Chief1 Deputy Chief1 Deputy Chief1 Deputy Chief1 Deputy Chief
RAC Unit1 RAC Unit1 RAC Unit1 RAC Unit1 RAC Unit
Satellite1 Satellite1 Satellite1 Satellite1 Satellite
Safety Battalion Chief1 Safety Battalion Chief1 Safety Battalion Chief1 Safety Battalion Chief1 Safety Battalion Chief
SOC Battalion Chief1 SOC Battalion Chief1 SOC Battalion Chief1 SOC Battalion Chief1 SOC Battalion Chief
Tactical Support Unit1 Tactical Support Unit1 Tactical Support Unit1 Tactical Support Unit1 Tactical Support Unit
Field Communications Unit1 Field Communications Unit1 Field Communications Unit1 Field Communications Unit1 Field Communications Unit
Field Communications Battalion Chief1 Field Communications Battalion Chief1 Field Communications Battalion Chief1 Field Communications Battalion Chief1 Field Communications Battalion Chief
Communications Unit1 Communications Unit1 Communications Unit1 Communications Unit1 Communications Unit
Mask Service Unit1 Mask Service Unit1 Mask Service Unit1 Mask Service Unit
Air Recon Chief
1 Air Recon Chief1 Air Recon Chief1 Air Recon Chief
Mobile Command Unit1 Mobile Command Unit1 Mobile Command Unit
Planning Section Chief1 Planning Section Chief1 Planning Section Chief

If the Incident Commander decides that the incident does not require a higher alarm level to be requested, they can specially request an additional unit to the scene without requesting a full alarm level assignment. For example, at a working fire, there are four engine companies, three ladder companies, one squad company, one rescue company, two battalion chiefs, and one division chief operating at the scene. If the fire is not large enough to require a 2nd alarm, but there is a need for more equipment and manpower, the commanding chief can request additional units to respond "specially called" to the scene.
Thus, at the scene of a 5th alarm fire in New York, there are a total of 21 engine companies, 11 ladder companies, one squad company, one rescue company, six battalion chiefs, one division chief, one deputy chief, one assistant chief, and the chief of operations, as well as multiple specialized units and or specially called units operating on the scene.
All of these companies come from many firehouses to the scene. Some companies, however, are quartered together at the same firehouse. So, it is not a matter of how many firehouses respond to a fire, as popularly believed, but rather, how many companies/units and how many firefighters are operating on scene.