A mortiseand tenonjoint connects two pieces of wood or of other material. Woodworkers around the world have used it for thousands of years to join pieces of wood, mainly when the adjoining pieces connect at right angles. Mortise and tenon joints are strong and stable joints that can be used in many projects. The mortise and tenon joint is consisted to be one of the strongest joints next to the common dovetail joint. They furnish a strong outcome and connect by either gluing or locking into place. The mortise and tenon tenon joint also gives an attractive lookout. One drawback to this joint is the difficulty in making it. As requires tight and precise cuts. In its most basic form, a mortise and tenon joint is both simple and strong. There are many variations of this type of joint, but the basic mortise and tenon comprises two components:
the mortise hole, and
the tenon tongue.
The tenon, formed on the end of a member generally referred to as a rail, fits into a square or rectangular hole cut into the other, corresponding member. The tenon is cut to fit the mortise hole exactly. It usually has shoulders that seat when the joint fully enters the mortise hole. The joint may be glued, pinned, or wedged to lock it in place. This joint is also used with other materials. For example, it is traditionally used by both stonemasons and blacksmiths.
Etymology
The nounmortise, "a hole or groove in which something is fitted to form a joint," comes from 1400 from Old Frenchmortaise, possibly from Arabicmurtazz, "fastened," past participle of razza, "cut a mortise in." The word tenon, a noun in English since the late 14th century, developed its sense of "a projection inserted to make a joint" from the Old French tenir "to hold."
History and ancient examples
This is an ancient joint dating back 7,000 years. The first examples, tusked joints, were found in a well near Leipzig - the world's oldest intact wooden architecture. It has also been found joining the wooden planks of the "Khufu ship", a 43.6 m long vessel sealed into a pit in the Giza pyramid complex of the Fourth Dynasty around 2500 BC. The oldest known use dates from the Early NeolithicLinear Pottery culture, where it was used in the constructing of the wooden lining of water wells. It has also been found in ancient furniture from archaeological sites in the Middle East, Europe and Asia. Many instances are found, for example, in ruins of houses in the Silk Road kingdom of Cadota, dating from the first to the fourth century BC. In traditional Chinese architecture, wood components, such as beams, brackets, roof frames and struts, were made to interlock with perfect fit, without using fasteners or glues, enabling the wood to expand and contract according to humidity. Archaeological evidence from Chinese sites shows that, by the end of the Neolithic, mortise-and-tenon joinery was employed in Chinese construction. The thirty sarsen stones of Stonehenge were dressed and fashioned with mortise-and-tenon joints before they were erected between 2600 and 2400 BC.
Types
Mortises
A mortise is a cavity cut into a timber to receive a tenon. There are several kinds of mortise: ;Open mortise:a mortise that has only three sides.. ;Stub mortise:a shallow mortise, the depth of which depends on the size of the timber; also a mortise that does not go through the workpiece. ;Through mortise:a mortise that passes entirely through a piece. ;Wedged half-dovetail:a mortise in which the back is wider, or taller, than the front, or opening. The space for the wedge initially leaves room to insert the tenon. The wedge, after the tenon is engaged, prevents its withdrawal. ;Through-wedged half-dovetail:a wedged half-dovetail mortise that passes entirely through the piece.
Tenons
A tenon is a projection on the end of a timber for insertion into a mortise. Usually the tenon is taller than it is wide. There are several kinds of tenon: ;Stub tenon:short, the depth of which depends on the size of the timber; also a tenon that is shorter than the width of the mortised piece so the tenon does not show. ;Through tenon:a tenon that passes entirely through the piece of wood it is inserted into, being clearly visible on the back side. ;Loose tenon:a tenon that is a separate part of the joint, as opposed to a fixed tenon that is an integral part of one of the pieces to be joined. ;Biscuit tenon:a thin oval piece of wood, shaped like a biscuit ;Pegged tenon:the joint is strengthened by driving a peg or dowel pin through one or more holes drilled through mortise side wall and tenon; this is common in timber framing joints together ;Tusk tenon:a kind of mortise and tenon joint that uses a wedge-shaped key to hold the joint together. ;Teasel tenon:a term used for the tenon on top of a jowled or gunstock post, which is typically received by the mortise in the underside of a tie beam. A common element of the English tying joint. ;Top tenon:the tenon that occurs on top of a post. ;Hammer-headed tenon:a method of forming a tenon joint when the shoulders cannot be tightened with a clamp. ;Half shoulder tenon:An asymmetric tenon with a shoulder on one side only. A common use is in framed, ledged and braced doors.
Further details about the completed joint
Generally, the size of the mortise and tenon is related to the thickness of the timbers. It is good practice to proportion the tenon as one third the thickness of the rail, or as close to this as is practical. The haunch, the cut-away part of a sash corner joint that prevents the tenon coming loose, is one third the length of the tenon and one sixth of the width of the tenon in its depth. The remaining two-thirds of the rail, the tenon shoulders, help to counteract lateral forces that might tweak the tenon from the mortise, contributing to its strength. These also serve to hide imperfections in the opening of the mortise.
