MiWi


MiWi is a proprietary wireless protocol supporting peer-to-peer, star network connectivity. It was designed by Microchip Technology. MiWi uses small, low-power digital radios based on the IEEE 802.15.4 standard, and is designed for low-power, cost-constrained networks, such as industrial monitoring and control, home and building automation, remote control, wireless sensors, lighting control, and automated meter reading.
The MiWi protocol is supported on Microchip's SAMR30 and SAMR21 ARM Cortex-M0+ devices and modules. Legacy MiWi protocol code supporting PIC and dsPIC microcontrollers has been frozen and is no longer recommended for new designs; however, it is still available in the Microchip Library for Applications for the MPLAB Integrated Development Environment.
The latest, supported protocol stack is available at no cost in the Advanced Software Framework for the Atmel Studio integrated development environment.

Protocols

Microchip Technology has released a Quick Start Guide, MiWi Software Design Guide and Migration Guide, which present technical information on MiWi. These are not primarily protocol specifications and are focused on implementing the MiWi protocol on Microchip microcontrollers.
As of 2019, interoperable third party implementations have not appeared. Unless they do, it will not be clear if those specifications are complete or accurate enough to serve roles other than supporting Microchip's code or being one more proprietary example of a lightweight WPAN stack. Many developers trying to use WPAN technologies have observed that the competing Zigbee WPAN protocol seems undesirably complex. Accordingly, there exists a technical niche for simpler protocols, of which MiWi is a proprietary example.

Software

The MiWi protocol is a small foot-print alternative to Zigbee, which it useful for cost-sensitive applications with limited memory. Although the MiWi software can all be downloaded for free from its official website, it is a proprietary solution that requires use with only with Microchip microcontrollers.

The MiWi protocol stack supports star and peer-to-peer wireless-network topologies, useful for simple, short-range, wireless node-to-node communication. Additionally, the stack provides sleeping-node, active-scan and energy-detect features while supporting the low-power requirements of battery-operated devices.

Hardware

MiWi Silicon

Microchip Technology released MiWi support on the SAMR30 and SAMR21 RF-MCU's in 2018. Both devices are ARM Cortex M0+, and have 256 KB Flash and up to 40 KB RAM and utilize OQPSK RF Modulation defined in IEEE 802.15.4 for a +3dB advantage in power efficiency vs. FSK modulation. Legacy devices supporting MiWi include several PIC Microcontrollers paired with the MRF89XA or the MRF24J40.
MiWi Modules beside a 1 cent coin.
In 2018 Microchip released the SAMR30M, a module based on the SAMR30 Cortex M0+ sub-GHz RF-MCU.
In 2008, Microchip released a 2.4 GHz wireless transceiver module with a standard 4-wire SPI interface paired with several Microchip PIC and dsPIC microcontrollers, and can be used in production devices. Being ZigBee compliant, and capable of communicating using MiWi wireless protocols, it is based on the IEEE 802.15.4 Wireless PAN standard. Option are for PCB antenna or u.FL connected antenna. The modules are regulatory-agency certified for the USA, Canada and European - Radio Equipment Directive 2014/53/EU, eliminating the need for users to receive independent FCC certification for their wireless products.

Network Analyzer

Microchip Technology's ZENA is a wireless packet sniffer and network analyzer following the IEEE 802.15.4 specification on the 2.4 GHz band. The ZENA analyzer supports both the ZigBee and MiWi protocols. Accompanying software can analyze network traffic and graphically display decoded packets. It can also display the network topology and the messages as they flow through the network. With the provided key of the network, data on encrypted MiWi networks can be sniffed and viewed as well.