Manufacturing in the United States
Manufacturing in the United States is a vital sector. The United States is the world's third largest manufacturer with a record high real output in Q1 2018 of $2.00 trillion well above the 2007 peak before the Great Recession of $1.95 trillion. The U.S. manufacturing industry employed 12.35 million people in December 2016 and 12.56 million in December 2017, an increase of 207,000 or 1.7%. Though still a large part of the US economy, in Q1 2018 manufacturing contributed less to GDP than the 'Finance, insurance, real estate, rental, and leasing' sector, the 'Government' sector, or 'Professional and business services' sector.
Though manufacturing output robustly recovered from the Great Recession to reach an all-time high in 2018, manufacturing employment has been declining since the 1990s. This 'jobless recovery' made job creation or preservation in the manufacturing sector an important topic in the 2016 United States presidential election.
Employment
Manufacturing jobs helped build out the U.S. middle class after World War II, as the U.S. established pro-labor policies and faced limited global competition. Between 1980 and 1985, and then again 2001 to 2009, there were precipitous declines in US manufacturing jobs; it is estimated that 1/3 of US manufacturing jobs vanished in the eight years 2001 to 2009, and few have returned. Some argue that the 2001-2009 period was worse for US manufacturing than the Great Depression.There are several possible explanations for the decline. Bill Lazonick argues that legalization of company's buying their own shares of stock in 1982 has led to sustained stock market bubbles that distorted investment away from physical plant. Others point to automation or developments outside the United States, such as the rise of China, globalized free trade, and supply chain innovation. These have arguably resulted in the off-shoring of thousands of U.S. manufacturing facilities and millions of manufacturing jobs to lower-wage countries. Meanwhile, technological innovation has increased productivity significantly, meaning that manufacturing output in the United States has increased by 80% since the 1980s, despite large job losses in the manufacturing sector during that same period.
The Bureau of Labor Statistics forecast in October 2017 that manufacturing employment would fall from 12.3 million in 2016 to 11.6 million in 2026, a decline of 736,000. As a share of employment, manufacturing would fall from 7.9% in 2016 to 6.9% in 2026, continuing a long-term trend.
The U.S. manufacturing industry employed 12.4 million people in March 2017, generating output of $2.2 trillion in Q3 2016, with real GDP of $1.9 trillion in 2009 dollars. The share of persons employed in manufacturing relative to total employment has steadily declined since the 1960s. Employment growth in industries such as construction, finance, insurance and real estate, and services industries played a significant role in reducing manufacturing’s overall share of U.S. employment. In 1990, services surpassed manufacturing as the largest contributor to overall private industry production, and then the finance, insurance and real estate sector surpassed manufacturing in 1991.
Since the entry of China into the World Trade Organization in December 2001, the decline in manufacturing jobs has accelerated. The U.S. goods trade deficit with China was approximately $350 billion in 2016. However it is possible that the import of goods from China is a result rather than a cause. The US stock market also ended a sustained fourteen year bubble in 2001, and the ensuing job loss pushed a significant portion of US population below the poverty line.
The Economist reported in January 2017 that manufacturing historically created good paying jobs for workers without a college education, particularly for men. The jobs paid well enough so that women did not have to work when they had young children. Unions were strong and owners did not want to risk strikes in their factories due to large capital investments and significant on the job training. Such jobs are much less available in the post-2001 era in the U.S. though they remain available in Germany, Switzerland and Japan, leading to calls to bring those jobs back from overseas, establish protectionism, and reduce immigration. Making it illegal for companies to purchase shares of their own stock has not yet gained traction as a remedy for the diversion of operating profits away from reinvestment in equipment and people. Manufacturing continues to evolve, due to factors such as information technology, supply chain innovations such as containerization, companies un-bundling tasks that used to be in one location or business, reduced barriers to trade, and competition from low-cost developing countries such as China and Mexico. Competition from high wage nations such as Germany is also increasing.
History
Between 1980 and 1985, US manufacturing was hard hit by a twin dynamic: first, Japanese productivity rose at a rapid rate, so that Japanese products fell in price by 12%. Second, Fed Chair Paul Volcker raised US interest rates such that the US dollar appreciated. This was the opposite policy from that which a rise in Japanese productivity would have dicated, and the US policy action made Japanese products 30% cheaper than American until 1986. The US machine tool sector never recovered from this body blow. Between 1983 and 2005, U.S. exports grew by 340 percent, with exports of manufactured goods increasing by 407 percent over the same period. In 1983, the primary export commodities were transportation equipment, computer and electronic products, agricultural products, machinery, chemicals, and food and kindred products. Together these commodities totaled 69 percent of total U.S. exports. In 2005, the primary export commodities were largely the same: computer and electronic products, transportation equipment, chemicals, machinery, miscellaneous manufactured commodities, and agricultural products. Together these commodities accounted for 69 percent of total U.S. merchandise exports.Between 1983 and 2005, exports of computer and electronic products grew by 493 percent, overtaking transportation as the leading export commodity. Though agricultural products exports grew by 26 percent during this period, its share of overall merchandise exports fell from 12 percent in 1983 to 4 percent in 2005.
In 1983, the top trading partners for U.S. exports were Canada, Japan, United Kingdom, Mexico, Germany, the Netherlands, Saudi Arabia, France, Korea, and Belgium and Luxembourg.
In 2005, the top markets for U.S. exports were Canada, Mexico, Japan, China, United Kingdom, Germany, South Korea, the Netherlands, France, and Taiwan. Between 1983 and 2005, exports to Mexico increased by 1,228 percent, allowing it to replace Japan as the second-largest market for U.S. exports.
In the first quarter of 2010, overall U.S. merchandise exports increased by 20 percent compared to the first quarter of 2009, with manufactured goods exports increasing by 20 percent. As in 2009, the highest export commodities were transportation equipment, computer and electronic products, chemicals, machinery, agricultural products, and miscellaneous manufactured commodities.
In the first quarter of 2010, the primary markets for U.S. merchandise exports were Canada, Mexico, China, Japan, the United Kingdom, Germany, South Korea, Brazil, the Netherlands, and Singapore. With the exception of the Netherlands, exports to all of these countries increased in the first quarter of 2010, compared to the same quarter in 2009. Notably, exports to Canada increased by 22 percent, Mexico by 28 percent, and China by 47 percent over this period. Exports to the two NAFTA partners accounted for nearly one-third of U.S. merchandise trade in the first quarter of 2010.
The panel chart in this section includes four diagrams describing manufacturing labor, output, and productivity historical trends through 2016:
- Figure 1-Job measures: The blue line is the ratio of manufacturing jobs to the total number of non-farm payroll jobs. It has declined since the 1960s as manufacturing jobs fell and services expanded. The red line is the number of manufacturing jobs, which had fallen by nearly one-third since the late 1990s.
- Figure 2-Output measures: Real GDP and nominal GDP from the manufacturing sector. While both rose from the trough due to the Great Recession, the real GDP had yet to regain its pre-crisis level as of 2016.
- Figure 3-Job measures, indexed: The red line shows the percent change in manufacturing jobs, measured relative to the 1999 as the starting point. The blue line shows construction jobs. Both were below pre-crisis levels in 2016.
- Figure 4-Productivity measures, indexed: Measured from the end of the recession, employment is up about 5%, but real output is up over 30%, indicating a significant gain in productivity.
Forecast
- 10.5 of the 11.5 million net jobs created over the 2016-2026 period would be in services. The service jobs growth rate would be about 0.8%. However, the goods producing sector, which includes manufacturing, would only add 219,000 jobs over that period, growing at a rate of 0.1%.
- Manufacturing employment would fall from 12.3 million in 2016 to 11.6 million in 2026, a decline of 736,000. As a share of employment, manufacturing would fall from 7.9% in 2016 to 6.9% in 2026.
- Employment in production occupations was expected to fall from 9.4 million in 2016 to 9.0 million in 2026, falling from 6.0% of employment to 5.4%.
Trade policy
While U.S. manufacturing employment is down, output was near a record level in 2017 in real GDP terms, indicating productivity has also improved significantly. This is likely due to automation, global supply chains, process improvements, and other technology changes.
Economist Paul Krugman argued in December 2016 that "America’s shift away from manufacturing doesn’t have much to do with trade, and even less to do with trade policy." He also cited the work of other economists indicating that the declines in manufacturing employment from 1999-2011 due to trade policy generally and trade with China specifically were "less than a fifth of the absolute loss of manufacturing jobs over the period" but that the effects were significant for regions directly impacted by those losses.
Modern overview
The United States is the world's second largest manufacturer with a record high real output in Q1 2018 of $2.00 trillion well above the 2007 peak before the Great Recession of $1.95 trillion. The U.S. manufacturing industry employed 12.35 million people in December 2016 and 12.56 million in December 2017, an increase of 207,000 or 1.7%.Historically, manufacturing has provided relatively well-paid blue-collar jobs, although this has been affected by globalization and automation.
Manufacturing continues to evolve, due to factors such as information technology, supply chain innovations such as containerization, companies un-bundling tasks that used to be in one location or business, reduced barriers to trade, and competition from low-cost developing countries such as China and Mexico.
Manufacturing is conducted among globally distributed supply chains, with various stages of production conducted in different countries. For example, automotive parts may be manufactured in the U.S., shipped to Mexico for assembly, then sent back to the U.S. In some cases, the components of the final product cross the border multiple times. An estimated 40% of the value of U.S. imports from Mexico is from content produced in the U.S.; this figure is 25% for Canada but only 4% for China. This "production sharing" is an indication of the integrated nature of the supply chains between the U.S., Mexico and Canada in the NAFTA region.
Trade balance
During 2016, the U.S. exported $1,051 billion in manufactured goods and imported $1,920 billion, a manufacturing goods deficit of $868 billion. The largest exports were transportation equipment, Chemicals, Computers and Electronic Products and "Machinery-Except Electrical".Industries
As of 2019, durable and nondurable goods manufacturing account for $3.1t and $3t of gross output of GDP, respectively.The largest manufacturing industries in the United States by revenue include petroleum, steel, automobiles, aerospace, telecommunications, chemicals, electronics, food processing, consumer goods, lumber, and mining. A large portion of U.S. industrial output, the United States leads the world in airplane manufacturing. American companies such as Boeing, Cessna ', Lockheed Martin ', and General Dynamics produce a vast majority of the world's civilian and military aircraft in factories stretching across the United States.
International comparison
The Congressional Research Service reported in January 2017 that:- "The United States’ share of global manufacturing activity declined from 28% in 2002, following the end of the 2001 U.S. recession, to 16.5% in 2011. Since then, the U.S. share has risen to 18.6%, the largest share since 2009. These estimates are based on the value of each country's manufacturing in U.S. dollars; part of the decline in the U.S. share was due to a 23% decline in the value of the dollar between 2002 and 2011, and part of the rise since 2011 is attributable to a stronger dollar.
- China displaced the United States as the largest manufacturing country in 2010. Again, part of China's rise by this measure has been due to the appreciation of its currency, the renminbi, against the U.S. dollar. The reported size of China's manufacturing sector decreased slightly in 2015 due to currency adjustments.
- Manufacturing output, measured in each country's local currency adjusted for inflation, has been growing more slowly in the United States than in China, South Korea, Germany, and Mexico, but more rapidly than in most European countries and Canada.
- Employment in manufacturing has fallen in most major manufacturing countries over the past quarter-century. In the United States, manufacturing employment since 1990 has declined in line with the changes in Western Europe and Japan, although the timing of the decline has differed from country to country.
- U.S. manufacturers spend far more on research and development than those in any other country, but manufacturers’ R&D spending is rising more rapidly in several other countries.
- Manufacturers in many countries appear to be spending increasing amounts on R&D, relative to their value added. U.S. manufacturers spend approximately 11% of value added on R&D, an increase of more than three percentage points since 2002. A large proportion of U.S. manufacturers’ R&D takes place in high technology sectors, such as pharmaceutical, electronics, and aircraft manufacturing, whereas in most other countries the largest share of R&D occurs in medium-technology sectors such as automotive and machinery manufacturing."