Lomo LC-A


The LOMO LC-A is a fixed lens, 35 mm film, leaf shutter, zone focus, compact camera introduced in 1984. Its design is based on the Cosina CX-2, with the difference being that it lacks a swiveling front and self-timer. It was built in Soviet-era Leningrad by Leningrad Optics and Mechanics Association.
Production of the camera ceased in 1994. In the mid-1990s, a group of enthusiasts from Vienna persuaded LOMO to restart production, which continued until 2005.
The LOMO LC-A's replacement, the LC-A+, was introduced in 2006 and production moved to China. The LC-A+ featured the original LC-A lens manufactured by LOMO in Russia. This changed in 2007 and lenses on subsequent models have been made in China. Some LC-As were sold badged as Zenith, this label was only a sticker underneath the lens. Zenit is a trademark of KMZ.

Operation

The only automatic function offered by the LC-A is exposure. Film loading, winding, rewinding, and focus adjustments are accomplished manually. Aperture can also be set manually, the shutter speed being fixed at s.
Exposure is completely automatic when the camera is set to "A"; the shutter speeds range from 2 minutes to s. The aperture range is f/2.8 to f/16. The automatic exposure system compensates for changes in light levels after the shutter is opened by increasing or decreasing the shutter speed. This, in conjunction with the rear-curtain flash-sync, results in interesting effects with flash photography in low ambient light levels.
The lens is focused by selecting one of four zones. Older versions of the camera feature viewfinder icons showing the currently selected focus zone, a feature omitted from later models.
A battery checking feature uses a LED inside the viewfinder; if there is sufficient power this illuminates whenever the shutter release button is lightly depressed. Another viewfinder LED illuminates whenever the camera's chosen shutter speed is below s.

Body design

The size and shape is very close to that of the Cosina CX-2, the main difference being that the lens bezel is fixed. Power is supplied by three 1.5v silver oxide cells.