Lloyd Arabella


The Lloyd Arabella was a passenger car produced by the Borgward Group in West Germany between 1959 and 1961. After the company's controversial bankruptcy the Arabella continued to be produced, albeit in greatly reduced quantities and branded as the Borgward Arabella until 1963. By the standards of the time and place it would have been defined as a small family car.
The Arabella was the first car from Borgward's Lloyd division to be fitted with a four cylinder engine.

Body and chassis

The Arabella was a completely new design, owing nothing to the Lloyd Alexander which it initially complemented and then replaced in the manufacturer's range. It was developed in just 23 months, which later commentators have asserted was much too short a period in which to identify and eliminate "teething-troubles" ahead of launch. It was constructed using a frame of tube-steel with cross-members.
The front wheels were suspended with double-wishbone connectors with coil springs and telescopic shock absorbers, and the back wheels on trailing arms with coil springs with and anti-roll bar. The brakes, considered advanced at the time, were applied using a hydraulic linkage, with four light-alloy 200 mm brake drums. The hand brake was operated mechanically and worked on the rear wheels. Almost as innovative at the time was the specification of Tubeless tyres on the 13" wheels. The rack and pinion steering required 3.36 between opposite locks, and the turning circle was.
The all-steel body followed modern styling trends, and featured a "panoramic wrap-around" rear window and tail fins. There was space for four people, although the two in the back would have found their head room rather restricted. The sales material of the time makes much of the car's passive safety features, such as the two spoke steering wheel with a recessed central hub, rounded door handles and a lock on the front seat-backs to prevent them from tilting forwards unexpectedly. The padded dashboard and interior window frames were also unusual, and the claim can certainly be made that in terms of secondary safety the Lloyd Arabella marked a step forward for cars of this class. The spare wheel was stowed below the rear luggage compartment. It was stowed externally which meant it could be accessed without having to empty out the luggage locker.

Engine and transmission

It was originally planned to power the Arabella with an uprated version of the two cylinder four-stroke power unit used in the existing Lloyd Alexander, together with a suitably uprated gear box from the same car. However, testing of a chassis equipped with this combination indicated that would not all fit under the hood bonnet of the body, which by that stage had been finalised, so a four cylinder Boxer motor was hastily developed. The flat configuration of the boxer motor made it suitable for the low bonnet line of the stylish bodywork, but accommodating it in the available space remained a challenge and the cooling fan had to be squeezed in above the two cylinders on the left side of the engine bay. Unlike the smaller existing Lloyd models, the Arabella used water to cool its engine. The gear box was positioned ahead of the front axle and ahead of the engine, as on the manufacturer's smaller cars, but it had to be redesigned in order to fit beyond the engine in the relatively short engine bay. There was talk of installing the engine transversely, possibly in order to avoid having to redesign the gearbox to make it fit, but in the event the Arabella featured a longitudinally mounted Boxer motor.

Broadening the range

Downmarket

On its introduction in August 1959 the Arabella featured a 4-cylinder 897 cc with a stated output of 38 PS at 4,800 rpm. During 1960 it was necessary to impose a major price increase, and in order to soften the blow a reduced specification cut-price Arabella was launched in July 1960, still with the 897 cc engine, but now in a detuned form offering a maximum power output of only 34 PS at 4,700 rpm.

Upmarket

In October 1960 a de luxe version of the Arabella was added to the range. As far as the technical specifications were concerned, the Arabella de Luxe was differentiated from the standard model by its engine. It was still a 4-cylinder 897 cc unit, but maximum power was increased to 45 PS at 5,300 rpm. This was achieved by increasing the compression ratio from 1:7½ on the standard model to 1:9. That in turn meant that drivers had to pay a little more for their fuel, because the higher compression ratio necessitated the use of the "super" grade petrol which was beginning to become available at West German service stations. The other important difference was the fitting of a larger Solex carburetor. The result was a useful improvement in performance, with the top speed increased from 120 km/h to 133 km/h, while the standing start time to 100 km/h was reduced from 28 to 23 seconds. The Arabella de luxe was in these respects significantly brisker than more expensive cars such as the Ford Taunus or, more importantly, the class-defining Volkswagen with its advertised top speed, in 1960, of only 112 km/h and leisurely standing start time to 100 km/h of 38 seconds.
From the outside the Arabella de Luxe was differentiated by a revised radiator grille, featuring the traditional Borgward "rhombus" shape at its centre, and the name "Borgward" was written on the front of the car in place of the name "Lloyd", even though sources state that the car was only formally rebranded as the "Borgward Arabella" in 1961. It is possible that the need to clear unsold stocks of new cars meant that any announcement of a rebranding was deferred so that the cars identified with the "Lloyd" name on the front could be sold first.

Arabella coupé

The Lloyd Sportcoupé is generally identified, in retrospect, as a coupé version of the Lloyd Arabella. In fact the Sportcoupé, with a stylish body produced by Pietro Frua of Turin, made its debut at the Turin Motor Show in November 1958. At that stage it was powered by the 596 cc two stroke engine from the :de:Lloyd Alexander |Lloyd Alexander TS, but the DM 6,000 asking price combined with the "rustic" sound and performance from the power unit made the car unsellable. However, by this time the manufacturer had given Frua firm orders for 50 of the coupé bodies, and so the stylish little Sportcoupé reappeared at the Frankfurt Motor Show in September 1959, now as a coupé version of the Arabella. By the time the cars were actually disposed of they were powered by the 45 PS "high compression engine" version of the Arabella.

Commercial

The Arabella was developed in just 23 months. There was a price to be paid for the rushed development schedule in terms of a large number of niggling faults and one or two more serious ones. The passenger cabin leaked on rainy days. The pattern of a pleasingly eye catching modern inherently robust new model from Borgward marred by "teething troubles" affecting the early cars was a familiar one for Borgward buyers through the 1950s, but by 1959 waiting lists were down and the West German car market had become far less forgiving. Early teething troubles caused massive damage to the image of the Lloyd Arabella, and large numbers of unsold Arabellas began to fill the undeveloped land beside the factory where the cars were assembled.

''Lloyd Arabella: Output (units)''