Line printer


A line printer prints one entire line of text before advancing to another line. Most early line printers were
impact printers.
Line printers are mostly associated with unit record equipment and the early days of digital computing, but the technology is still in use. Print speeds of 600 lines per minute were achieved in the 1950s, later increasing to as much as 1200 lpm. Line printers print a complete line at a time and have speeds in the range of 150 to 2500 lines per minute.
The types of line printers are drum printers, band-printers, and chain printers. Other non-impact technologies have also been used, as thermal line printers were popular in the 1970s and 1980s, and some inkjet and laser printers produce output a line or a page at a time.

Designs

Many impact printers, such as the daisywheel printer and dot matrix printer, used a print head that printed a character then moved on until an entire line was printed. Line printers were much faster, as each impact printed an entire line.
There have been five principal designs:
Because all of these printing methods were noisy, line printers of all designs were enclosed in sound-absorbing cases of varying sophistication.

Timing-sensitive designs

Several designs of printers have similar characteristics.

Drum printer

In a typical drum printer design, a fixed font character set is engraved onto the periphery of a number of print wheels, the number matching the number of columns the printer could print. The wheels, joined to form a large drum, spin at high speed and paper and an inked ribbon is stepped past the print position. As the desired character for each column passes the print position, a hammer strikes the paper from the rear and presses the paper against the ribbon and the drum, causing the desired character to be recorded on the continuous paper. Because the drum carrying the letterforms remains in constant motion, the strike-and-retreat action of the hammers had to be very fast. Typically, they were driven by voice coils mounted on the moving part of the hammer.
Often the character sequences are staggered around the drum, shifting with each column. This prevents firing all of the hammers simultaneously when printing a line that consists of the same character in all columns, such as a complete line of dashes .
Lower-cost printers did not use a hammer for each column. Instead, a hammer was provided for every other column and the entire hammer bank was arranged to shift left and right, driven by an additional voice coil. For this style of printer, two complete revolutions of the character drum were required with one revolution being used to print all the "odd" columns and another revolution being used to print all of the "even" columns; however, on the plus side, only half the number of hammers, magnets, and the associated channels of drive electronics were required.
At least one low-cost printer, made by CDC, achieved the same end by moving the paper laterally while keeping the hammer bank at rest.
Dataproducts was a typical vendor of drum printers, often selling similar models with both a full set of hammers and a half set of hammers.

Chain (train) printer

Chain printers place the type on a horizontally-moving chain or on a track. As with the drum printer, as the correct character passes by each column, a hammer is fired from behind the paper. Compared to drum printers, chain printers have the advantage that the type chain can usually be changed by the operator. A further advantage is that vertical registration of characters in a line is much improved over drum printers, which need extremely precise hammer timing to achieve a reasonably straight line of print. By selecting chains that have a smaller character set, the printer can print much faster than if the chain contains the entire upper- and lower-case alphabet, numbers, and all special symbols. This is because, with many more instances of the numbers appearing in the chain, the time spent waiting for the correct character to "pass by" is greatly reduced. Common letters and symbols appear more often on the chain, according to the frequency analysis of the likely input. It is also possible to play primitive tunes on these printers by timing the nonsense of the printout to the sequence on the chain, a rather primitive piano. IBM was probably the best-known chain printer manufacturer and the IBM 1403 is probably the most famous example of a chain printer.
Band printer
Band printers are a variation of chain printers in which a thin steel band is used instead of a chain, with the characters embossed or etched onto the band. Again, a selection of different bands are generally available with a different mix of characters so a character set best matched to the characters commonly printed can be chosen. Dataproducts was a well known manufacturer of band printers, with their B300, B600, and B1000 range, the model number representing the lines per minute rate of the printer.

Bar printer

Bar printers were similar to chain printers but were slower and less expensive. Rather than a chain moving continuously in one direction, the characters were on fingers mounted on a bar that moved left-to-right and then right-to-left in front of the paper. An example was the IBM 1443.

Common characteristics

In all three designs, timing of the hammers was critical, and was adjustable as part of the servicing of the printer. For drum printers, incorrect timing of the hammer resulted in printed lines that wandered vertically, albeit with characters correctly aligned horizontally in their columns. For train and bar printers, incorrect timing of the hammers resulted in characters shifting horizontally, printed closer or farther from the next character, albeit on vertically-level printed lines. The vertical misalignment of drum printers is more noticeable and annoying to human vision.
Most drum, chain, and bar printers were capable of printing up to 132 columns, but a few designs could only print 80 columns and some other designs as many as 160 columns.

Comb printer

Comb printers, also called line matrix printers, printed a matrix of dots instead of individual characters in the same way as single-character dot matrix printers, but using a comb of hammers to print a portion of an entire row of pixels at one time. By shifting the comb back and forth slightly, the entire pixel row could be printed. The paper then advanced and the next pixel row was printed. Because far less print head motion was involved than in a conventional dot matrix printer, these printers were much faster, and competitive in speed with formed-character line printers without being restricted to a set of available characters, thus being able to print dot-matrix graphics and variable-sized characters.
Printronix and TallyGenicom are well-known vendors of comb printers.

Wheel printers

In 1949 IBM introduced the IBM 407 Accounting Machine with a wheel print mechanism that could print 150 alphanumeric lines a minute. Each of the 120 print positions had its own type wheel which rotated under electromechanical control. Once all were in position, print hammers struck the wheels against a ribbon and the paper. The 407 or its wheel line printer mechanism was attached to a variety of early IBM computers, including the IBM 650, most members of the IBM 700/7000 series and the IBM 1130, the last introduced in 1965.

Paper (forms) handling

All line printers used continuous form paper provided in boxes of continuous fan-fold forms rather than cut-sheets. The paper was usually perforated to tear into cut sheets if desired and was commonly printed with alternating white and light-green areas, allowing the reader to easily follow a line of text across the page. This was the iconic "green bar" or "music-ruled" form that dominated the early computer age. Pre-printed forms were also commonly used. A common task for the system operator was to change from one paper form to another as one print job completed and another was to begin. Some line printers had covers that opened automatically when the printer required attention.
Standard "green bar" page sizes included portrait-format pages of 8½ × 11 inches, usually printed at 80 columns by 66 lines of characters or 88 lines, and landscape-format pages of 14 × 11 inches, usually printed at 132 columns by 66 or 88 lines. Also common were landscape-format pages of 14 × 8½ inches, allowing for 132 columns by 66 lines on a more compact page.
These continuous forms were advanced through the printer by means of tractors. Depending on the sophistication of the printer, there might simply be two tractors at the top of the printer or tractors at the top and bottom. The horizontal position of the tractors was usually adjustable to accommodate different forms. The earliest printers by IBM used a hydraulic motor to move the forms. In later line printers, high-speed servomechanisms usually drove the tractors, allowing very rapid positioning of the paper, both for advancing line-by-line and slewing to the top of the next form. The faster line printers, of necessity, also used "stackers" to re-fold and stack the fan-fold forms as they emerged from the printer.
The high-speed motion of the paper often developed large electrostatic charges. Line printers frequently used a variety of discharge brushes and active static eliminators to discharge these accumulated charges.
Many printers supported ASA carriage control characters which provided a limited degree of control over the paper, by specifying how far to advance the paper between printed lines. Various means of providing vertical tabulation were provided, ranging from a paper carriage control tape loop to fully electronic tab simulation.

Origins

Tabulators built by the U.S. Census Bureau for the 1910 census could print their results. Prior to that, tabulator operators had to write down totals from counter wheels onto tally sheets. IBM developed a series of printing accounting machines, beginning in 1920. The 285 Numeric Printing Tabulator could read 150 cards per minute. The 405, introduced in 1934, could print at 80 lines per minute. It had 88 type bars, one for each print position, with 43 alphanumeric bars on the left, followed by 45 numeric-only bars. The IBM 402 series, introduced after World War II, had a similar print arrangement and was used by IBM in early computing devices, including the IBM Card-Programmed Electronic Calculator.
An early drum printer was the "Potter Flying Typewriter", in 1952. "Instead of working laboriously, one character at a time, it prints whole lines at once, 300 lines per minute, on a paper band.... Heart of the machine is a continuously spinning disk with the necessary letters and numbers on its rim.... As the disk revolves, 80 electrically operated hammers tap the back of the paper against an inked ribbon in contact with the disk, thus printing the proper characters in the proper places on the line."

Influence on software

The names of the lp and lpr commands in Unix were derived from the term "line printer". Analogously, many other systems call their printing devices "LP", "LPT", or some similar variant, whether these devices are in fact line printers or other types of printers. These references served to distinguish formatted final output from normal interactive output from the system, which in many cases in line printer days was also printed on paper but not by a line printer. Line printers printed characters, letters and numbers line by line.