Levenshtein distance


In information theory, linguistics and computer science, the Levenshtein distance is a string metric for measuring the difference between two sequences. Informally, the Levenshtein distance between two words is the minimum number of single-character edits required to change one word into the other. It is named after the Soviet mathematician Vladimir Levenshtein, who considered this distance in 1965.
Levenshtein distance may also be referred to as edit distance, although that term may also denote a larger family of distance metrics known collectively as edit distance. It is closely related to pairwise string alignments.

Definition

The Levenshtein distance between two strings is given by where
where is the indicator function equal to 0 when and equal to 1 otherwise, and is the distance between the first characters of and the first characters of. and are 1-based indices.
Note that the first element in the minimum corresponds to deletion, the second to insertion and the third to match or mismatch, depending on whether the respective symbols are the same.

Example

For example, the Levenshtein distance between "kitten" and "sitting" is 3, since the following three edits change one into the other, and there is no way to do it with fewer than three edits:
  1. kitten → sitten
  2. sitten → sittin
  3. sittin → sitting.

    Upper and lower bounds

The Levenshtein distance has several simple upper and lower bounds. These include:
An example where the Levenshtein distance between two strings of the same length is strictly less than the Hamming distance is given by the pair "flaw" and "lawn". Here the Levenshtein distance equals 2. The Hamming distance is 4.

Applications

In approximate string matching, the objective is to find matches for short strings in many longer texts, in situations where a small number of differences is to be expected. The short strings could come from a dictionary, for instance. Here, one of the strings is typically short, while the other is arbitrarily long. This has a wide range of applications, for instance, spell checkers, correction systems for optical character recognition, and software to assist natural language translation based on translation memory.
The Levenshtein distance can also be computed between two longer strings, but the cost to compute it, which is roughly proportional to the product of the two string lengths, makes this impractical. Thus, when used to aid in fuzzy string searching in applications such as record linkage, the compared strings are usually short to help improve speed of comparisons.
In linguistics, the Levenshtein distance is used as a metric to quantify the linguistic distance, or how different two languages are from one another. It is related to mutual intelligibility, the higher the linguistic distance, the lower the mutual intelligibility, and the lower the linguistic distance, the higher the mutual intelligibility.

Relationship with other edit distance metrics

There are other popular measures of edit distance, which are calculated using a different set of allowable edit operations. For instance,
Edit distance is usually defined as a parameterizable metric calculated with a specific set of allowed edit operations, and each operation is assigned a cost. This is further generalized by DNA sequence alignment algorithms such as the Smith–Waterman algorithm, which make an operation's cost depend on where it is applied.

Computing Levenshtein distance

Recursive

This is a straightforward, but inefficient, recursive Haskell implementation of a lDistance function that takes two strings, s and t, together with their lengths, and returns the Levenshtein distance between them:

lDistance :: => -> -> Int
lDistance t = length t -- If s is empty the distance is the number of characters in t
lDistance s = length s -- If t is empty the distance is the number of characters in s
lDistance =
if
a b
then
lDistance s' t' -- If the first characters are the same they can be ignored
else
1 + minimum -- Otherwise try all three possible actions and select the best one


This implementation is very inefficient because it recomputes the Levenshtein distance of the same substrings many times.
A more efficient method would never repeat the same distance calculation. For example, the Levenshtein distance of all possible prefixes might be stored in an array where is the distance between the last characters of string s and the last characters of string t. The table is easy to construct one row at a time starting with row 0. When the entire table has been built, the desired distance is in the table in the last row and column, representing the distance between all of the characters in s and all the characters in t.

Iterative with full matrix

Computing the Levenshtein distance is based on the observation that if we reserve a matrix to hold the Levenshtein distances between all prefixes of the first string and all prefixes of the second, then we can compute the values in the matrix in a dynamic programming fashion, and thus find the distance between the two full strings as the last value computed.
This algorithm, an example of bottom-up dynamic programming, is discussed, with variants, in the 1974 article The String-to-string correction problem by Robert A. Wagner and Michael J. Fischer.
This is a straightforward pseudocode implementation for a function LevenshteinDistance that takes two strings, s of length m, and t of length n, and returns the Levenshtein distance between them:

function LevenshteinDistance:
// for all i and j, d will hold the Levenshtein distance between
// the first i characters of s and the first j characters of t
declare int d
set each element in d to zero
// source prefixes can be transformed into empty string by
// dropping all characters
for i from 1 to m:
d := i
// target prefixes can be reached from empty source prefix
// by inserting every character
for j from 1 to n:
d := j
for j from 1 to n:
for i from 1 to m:
if s = t:
substitutionCost := 0
else:
substitutionCost := 1
d := minimum // substitution
return d

Two examples of the resulting matrix :

kitten
0123456
s123456
i222345
t332234
t443223
i554323
n665433
g776544

Saturday
012345678
S134567
u21123456
n32223456
d43333445
a54344444
y65445554


The invariant maintained throughout the algorithm is that we can transform the initial segment into using a minimum of operations. At the end, the bottom-right element of the array contains the answer.

Iterative with two matrix rows

It turns out that only two rows of the table are needed for the construction if one does not want to reconstruct the edited input strings.
The Levenshtein distance may be calculated iteratively using the following algorithm:

function LevenshteinDistance:
// create two work vectors of integer distances
declare int v0
declare int v1
// initialize v0
// this row is A: edit distance for an empty s
// the distance is just the number of characters to delete from t
for i from 0 to n:
v0 = i
for i from 0 to m-1:
// calculate v1 from the previous row v0
// first element of v1 is A
// edit distance is delete chars from s to match empty t
v1 = i + 1
// use formula to fill in the rest of the row
for j from 0 to n-1:
// calculating costs for A
deletionCost := v0 + 1
insertionCost := v1 + 1
if s = t:
substitutionCost := v0
else:
substitutionCost := v0 + 1;
v1 := minimum
// copy v1 to v0 for next iteration
// since data in v1 is always invalidated, a swap without copy could be more efficient
swap v0 with v1
// after the last swap, the results of v1 are now in v0
return v0

This two row variant is suboptimal—the amount of memory required may be reduced to one row and one word of overhead, for better cache locality.
Hirschberg's algorithm combines this method with divide and conquer. It can compute the optimal edit sequence, and not just the edit distance, in the same asymptotic time and space bounds.

Adaptive variant

The dynamic variant is not the ideal implementation. An adaptive approach may reduce the amount of memory required and, in the best case, may reduce the time complexity to linear in the length of the shortest string, and, in the worst case, no more than quadratic in the length of the shortest string. The idea is that one can use efficient library functions to check for common prefixes and suffixes and only dive into the DP part on mismatch.

Automata

efficiently determine whether a string has an edit distance lower than a given constant from a given string.

Approximation

The Levenshtein distance between two strings of length can be approximated to within a factor
where is a free parameter to be tuned, in time.

Computational complexity

It has been shown that the Levenshtein distance of two strings of length cannot be computed in time for any ε greater than zero unless the strong exponential time hypothesis is false.